SR 11023
Based on 1 Customer Validation
SR 11023 is an orally active antagonist of PPARγ, with the IC50 value of 109 nM that plays an important role in diabetic research.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.55%
- CAS. Nr.: 1820602-13-8
- Formel: C33H36N2O3
- Molecular Weight:508.65
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
|
PPARγ 108 nM (IC50) |
Chemical Information
-
CAS. Nr. 1820602-13-8
-
Appearance Solid
-
Molecular Weight 508.65
-
Formel C33H36N2O3
-
Color White to yellow
-
SMILES
C[C@@H](C1=CC(C2CC2)=CC=C1)NC(C3=CC=C(C(C(C)=C4C)=C3)N4CC5=CC=C(C=C5)C(C)(C)C(O)=O)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (196.60 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9660 mL | 9.8299 mL | 19.6599 mL | 49.1497 mL |
| 5 mM | 0.3932 mL | 1.9660 mL | 3.9320 mL | 9.8299 mL | |
| 10 mM | 0.1966 mL | 0.9830 mL | 1.9660 mL | 4.9150 mL | |
| 15 mM | 0.1311 mL | 0.6553 mL | 1.3107 mL | 3.2766 mL | |
| 20 mM | 0.0983 mL | 0.4915 mL | 0.9830 mL | 2.4575 mL | |
| 25 mM | 0.0786 mL | 0.3932 mL | 0.7864 mL | 1.9660 mL | |
| 30 mM | 0.0655 mL | 0.3277 mL | 0.6553 mL | 1.6383 mL | |
| 40 mM | 0.0491 mL | 0.2457 mL | 0.4915 mL | 1.2287 mL | |
| 50 mM | 0.0393 mL | 0.1966 mL | 0.3932 mL | 0.9830 mL | |
| 60 mM | 0.0328 mL | 0.1638 mL | 0.3277 mL | 0.8192 mL | |
| 80 mM | 0.0246 mL | 0.1229 mL | 0.2457 mL | 0.6144 mL | |
| 100 mM | 0.0197 mL | 0.0983 mL | 0.1966 mL | 0.4915 mL |
SR 11023 Related Classifications
HY-160162 Related Classifications
Powered by Bioz