AMG 579
Based on 1 Customer Validation
AMG 579 is a potent, selective, and efficacious inhibitor of phosphodiesterase 10A (PDE10A) with an IC50 of 0.1 nM.
For research use only. We do not sell to patients.
- Purity: 98.95%
- CAS No.: 1227067-61-9
- Formula: C25H23N5O3
- Molecular Weight:441.48
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biological Activity
IC50: 0.1 nM (Phosphodiesterase 10A)[1]
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1227067-61-9
-
Appearance Solid
-
Molecular Weight 441.48
-
Formula C25H23N5O3
-
Color Off-white to light yellow
-
SMILES
CC(N1CCC(C2=NC=CN=C2OC3=CC=C(C(C4=NC5=CC=CC=C5N4)=O)C=C3)CC1)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 41.67 mg/mL (94.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Rats[1]
Adult male Sprague−Dawley rats (250−280 g) are dosed at 0.1, 0.3, 1, and 3 mg/kg PO 1 h prior to administration of PCP. The magnitude of rat locomotor activity is quantified as number of beam breaks over a 2 h period[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2651 mL | 11.3255 mL | 22.6511 mL | 56.6277 mL |
| 5 mM | 0.4530 mL | 2.2651 mL | 4.5302 mL | 11.3255 mL | |
| 10 mM | 0.2265 mL | 1.1326 mL | 2.2651 mL | 5.6628 mL | |
| 15 mM | 0.1510 mL | 0.7550 mL | 1.5101 mL | 3.7752 mL | |
| 20 mM | 0.1133 mL | 0.5663 mL | 1.1326 mL | 2.8314 mL | |
| 25 mM | 0.0906 mL | 0.4530 mL | 0.9060 mL | 2.2651 mL | |
| 30 mM | 0.0755 mL | 0.3775 mL | 0.7550 mL | 1.8876 mL | |
| 40 mM | 0.0566 mL | 0.2831 mL | 0.5663 mL | 1.4157 mL | |
| 50 mM | 0.0453 mL | 0.2265 mL | 0.4530 mL | 1.1326 mL | |
| 60 mM | 0.0378 mL | 0.1888 mL | 0.3775 mL | 0.9438 mL | |
| 80 mM | 0.0283 mL | 0.1416 mL | 0.2831 mL | 0.7078 mL |