AZ-3
Based on 1 Customer Validation
AZ-3 is a potent and selective JAK1 inhibitor with an IC50 of 34 nM.
For research use only. We do not sell to patients.
- Purity: 98.05%
- CAS No.: 2228908-91-4
- Formula: C20H28FN7
- Molecular Weight:385.48
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
IC50: 34 nM (JAK1)[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A549 | GI50 |
>10 μM
Compound: 24; AZ-3
|
Antiproliferative activity against human A549 cells after 48 hrs by Alamar Blue based assay
Antiproliferative activity against human A549 cells after 48 hrs by Alamar Blue based assay
|
[PMID: 29856615] |
Chemical Information
-
CAS No. 2228908-91-4
-
Appearance Solid
-
Molecular Weight 385.48
-
Formula C20H28FN7
-
Color White to off-white
-
SMILES
FC1=NC=C(N2C[C@H]3N(C)C[C@@H]2C3)C=C1NC4=NC(N[C@@H](CC)C)=C(C)C=N4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (259.42 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (12.97 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (12.97 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5942 mL | 12.9708 mL | 25.9417 mL | 64.8542 mL |
| 5 mM | 0.5188 mL | 2.5942 mL | 5.1883 mL | 12.9708 mL | |
| 10 mM | 0.2594 mL | 1.2971 mL | 2.5942 mL | 6.4854 mL | |
| 15 mM | 0.1729 mL | 0.8647 mL | 1.7294 mL | 4.3236 mL | |
| 20 mM | 0.1297 mL | 0.6485 mL | 1.2971 mL | 3.2427 mL | |
| 25 mM | 0.1038 mL | 0.5188 mL | 1.0377 mL | 2.5942 mL | |
| 30 mM | 0.0865 mL | 0.4324 mL | 0.8647 mL | 2.1618 mL | |
| 40 mM | 0.0649 mL | 0.3243 mL | 0.6485 mL | 1.6214 mL | |
| 50 mM | 0.0519 mL | 0.2594 mL | 0.5188 mL | 1.2971 mL | |
| 60 mM | 0.0432 mL | 0.2162 mL | 0.4324 mL | 1.0809 mL | |
| 80 mM | 0.0324 mL | 0.1621 mL | 0.3243 mL | 0.8107 mL | |
| 100 mM | 0.0259 mL | 0.1297 mL | 0.2594 mL | 0.6485 mL |