BacPROTAC-1
Based on 1 Customer Validation
BacPROTAC-1 is a mSA BacPROTAC degrader. BacPROTAC-1 binds mSA and ClpCNTD with high affinity (KDs of 3.9 and 2.8 μM, respectively).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 93.46%
- Formule: C45H83N12O17PS
- Masse moléculaire:1127.25
-
Stockage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform PROTACs
More
Activité biologique
KD: 2.8 μM (ClpCNTD), 3.9 μM (mSA)[1]
mSA alone and mSA fusion proteins (mSA-NrdI, mSA-TagD, mSA-NusA, mSA-Kre) are degraded by ClpCP in a BacPROTAC-1-dependent manner (1-100 μM; 2 h). The degradation is ATP dependent and pArg or biotin blocks the BacPROTAC-1 induced degradation[1].
BacPROTAC-1 induces formation of an active ClpC oligomer[1].
BacPROTAC-1 (1-100 μM) can reprogram the mycobacterial ClpC1P1P2[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
Appearance Solid
-
Masse moléculaire 1127.25
-
Formule C45H83N12O17PS
-
Color White to off-white
-
SMILES
O=C(NCCCC[C@H](NC(CCOCCOCCNC(CCOCCOCCNC(CCOCCOCCNC([C@H](CCCNC(NP(O)(O)=O)=N)NC(C)=O)=O)=O)=O)=O)C(N)=O)CCCC[C@@H]1SC[C@@H]([C@@H]1N2)NC2=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
DMSO : 100 mg/mL (88.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.22 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.22 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8871 mL | 4.4356 mL | 8.8711 mL | 22.1779 mL |
| 5 mM | 0.1774 mL | 0.8871 mL | 1.7742 mL | 4.4356 mL | |
| 10 mM | 0.0887 mL | 0.4436 mL | 0.8871 mL | 2.2178 mL | |
| 15 mM | 0.0591 mL | 0.2957 mL | 0.5914 mL | 1.4785 mL | |
| 20 mM | 0.0444 mL | 0.2218 mL | 0.4436 mL | 1.1089 mL | |
| 25 mM | 0.0355 mL | 0.1774 mL | 0.3548 mL | 0.8871 mL | |
| 30 mM | 0.0296 mL | 0.1479 mL | 0.2957 mL | 0.7393 mL | |
| 40 mM | 0.0222 mL | 0.1109 mL | 0.2218 mL | 0.5544 mL | |
| 50 mM | 0.0177 mL | 0.0887 mL | 0.1774 mL | 0.4436 mL | |
| 60 mM | 0.0148 mL | 0.0739 mL | 0.1479 mL | 0.3696 mL | |
| 80 mM | 0.0111 mL | 0.0554 mL | 0.1109 mL | 0.2772 mL |
BacPROTAC-1 Related Classifications
HY-153575 Related Classifications
Powered by Bioz