Batatasin III
Based on 1 Customer Validation
Batatasin III, a stilbenoid, inhibits cancer migration and invasion by suppressing epithelial to mesenchymal transition (EMT) and FAK-AKT signals. Batatasin III has anti-cancer activities.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.54%
- CAS No.: 56684-87-8
- Formule: C15H16O3
- Masse moléculaire:244.29
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A549 | IC50 |
>10 μM
Compound: 19
|
Cytotoxicity against human A549 cells assessed as decrease in cell viability after 6 days by MTT assay
Cytotoxicity against human A549 cells assessed as decrease in cell viability after 6 days by MTT assay
|
[PMID: 27310249] |
| HeLa | IC50 |
>10 μM
Compound: 19
|
Cytotoxicity against human HeLa cells assessed as decrease in cell viability after 6 days by MTT assay
Cytotoxicity against human HeLa cells assessed as decrease in cell viability after 6 days by MTT assay
|
[PMID: 27310249] |
| MCF7 | IC50 |
>10 μM
Compound: 19
|
Cytotoxicity against human MCF7 cells assessed as decrease in cell viability after 6 days by MTT assay
Cytotoxicity against human MCF7 cells assessed as decrease in cell viability after 6 days by MTT assay
|
[PMID: 27310249] |
| Neutrophil | IC50 |
0.9 μM
Compound: 31
|
Antiinflammatory activity in human neutrophils assessed as inhibition of FMLP/cytochalasin B-induced superoxide anion generation by measuring superoxide dismutase-inhibitable reduction of ferricytochrome c preincubated for 5 mins followed by FMLP/cytochal
Antiinflammatory activity in human neutrophils assessed as inhibition of FMLP/cytochalasin B-induced superoxide anion generation by measuring superoxide dismutase-inhibitable reduction of ferricytochrome c preincubated for 5 mins followed by FMLP/cytochal
|
[PMID: 27525452] |
| Neutrophil | IC50 |
4.7 μM
Compound: 31
|
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced elastase release using MeO-Suc-Ala-Ala-Pro-Val-p-nitroanilide as elastase substrate preincubated for 5 mins followed by fMLP/CB-induction
Antiinflammatory activity in human neutrophils assessed as inhibition of fMLP/CB-induced elastase release using MeO-Suc-Ala-Ala-Pro-Val-p-nitroanilide as elastase substrate preincubated for 5 mins followed by fMLP/CB-induction
|
[PMID: 27525452] |
| RAW264.7 | IC50 |
>50 μM
Compound: Batatasin III
|
Antiinflammatory activity against mouse RAW264.7 cells assessed as inhibition of NO release
Antiinflammatory activity against mouse RAW264.7 cells assessed as inhibition of NO release
|
[PMID: 37852423] |
Batatasin III (25-100 μM; 48 h) exhibits anti-proliferative activity in H460 cells. Batatasin III at concentrations lower than 100 μM has no cytotoxic effects[1].
Batatasin III significantly suppresses EMT indicated by the decrease of N-cadherin and Vimentin, and up-regulation of E-cadherin[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 56684-87-8
-
Appearance Solid
-
Masse moléculaire 244.29
-
Formule C15H16O3
-
Color White to off-white
-
SMILES
OC1=CC(OC)=CC(CCC2=CC=CC(O)=C2)=C1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvant et solubilité
DMSO : 100 mg/mL (409.35 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (10.23 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (10.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.0935 mL | 20.4675 mL | 40.9350 mL | 102.3374 mL |
| 5 mM | 0.8187 mL | 4.0935 mL | 8.1870 mL | 20.4675 mL | |
| 10 mM | 0.4093 mL | 2.0467 mL | 4.0935 mL | 10.2337 mL | |
| 15 mM | 0.2729 mL | 1.3645 mL | 2.7290 mL | 6.8225 mL | |
| 20 mM | 0.2047 mL | 1.0234 mL | 2.0467 mL | 5.1169 mL | |
| 25 mM | 0.1637 mL | 0.8187 mL | 1.6374 mL | 4.0935 mL | |
| 30 mM | 0.1364 mL | 0.6822 mL | 1.3645 mL | 3.4112 mL | |
| 40 mM | 0.1023 mL | 0.5117 mL | 1.0234 mL | 2.5584 mL | |
| 50 mM | 0.0819 mL | 0.4093 mL | 0.8187 mL | 2.0467 mL | |
| 60 mM | 0.0682 mL | 0.3411 mL | 0.6822 mL | 1.7056 mL | |
| 80 mM | 0.0512 mL | 0.2558 mL | 0.5117 mL | 1.2792 mL | |
| 100 mM | 0.0409 mL | 0.2047 mL | 0.4093 mL | 1.0234 mL |