Ferutinin
Based on 1 Customer Validation
Ferutinin, a natural terpenoid compound, is an estrogen receptor ERα agonist and estrogen ERβ-receptor agonist/antagonist with IC50s of 33.1 nM and 180.5 nM, respectively. Ferutinin acts as an electrogenic Ca2+-ionophore that increases calcium permeability of lipid bilayer membranes, mitochondria. Ferutinin possesses estrogenic, antitumor, antibacterial and antiinflammatory activities.
For research use only. We do not sell to patients.
- Purity: 99.23%
- CAS No.: 41743-44-6
- Formula: C22H30O4
- Molecular Weight:358.47
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
ERα 33.1 nM (IC50) |
ERβ 180.5 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A549 | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human A549 cells after 72 hrs by MTT assay
Cytotoxicity against human A549 cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| HeLa | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human HeLa cells after 72 hrs by MTT assay
Cytotoxicity against human HeLa cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| HL-60 | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human HL60 cells after 72 hrs by MTT assay
Cytotoxicity against human HL60 cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| Jurkat | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human Jurkat cells after 72 hrs by MTT assay
Cytotoxicity against human Jurkat cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| K562 | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human K562 cells after 72 hrs by MTT assay
Cytotoxicity against human K562 cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| RS4-11 | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human RS4:11 cells after 72 hrs by MTT assay
Cytotoxicity against human RS4:11 cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
| SEM | IC50 |
>100 μM
Compound: DE-7
|
Cytotoxicity against human SEM cells after 72 hrs by MTT assay
Cytotoxicity against human SEM cells after 72 hrs by MTT assay
|
[PMID: 21885290] |
Ferutinin manifested antiproliferative activity, inducing apoptosis in several cell types: MCF-7 estrogen-dependent cancer cells, leukemia T-cell line (Jurkat), human and mouse colon carcinoma cells (Caco-2, CT26, HT29), as well as bladder (TCC) cancer cells. Ferutinin potentiates bone mineralization, and is proposed to be used as an antiosteoporosis phytoestrogen[2].
Ferutinin considerably increases the permeability of artificial and cellular membranes to Ca2+-ions and produces apoptotic cell death in different cell lines in a mitochondria-dependent manner. Ferutinin alone (10-60 µM) also dose-dependently dissipated membrane potential. In the presence of Ca2+-ions, Ferutinin (10-60 µM) induces considerable depolarization of the inner mitochondrial membrane[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 41743-44-6
-
Appearance Solid
-
Molecular Weight 358.47
-
Formula C22H30O4
-
Color White to off-white
-
SMILES
O=C(O[C@@H]1[C@@]2([H])[C@@](C(C)C)(O)CC[C@]2(C)CC=C(C)C1)C3=CC=C(O)C=C3
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (139.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (3.49 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (279 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Kazuhiro Ikeda, et al. Terpenoids found in the umbelliferae family act as agonists/antagonists for ER(alpha) and ERbeta: differential transcription activity between ferutinine-liganded ER(alpha) and ERbeta. Biochem Biophys Res Commun. 2002 Feb 22;291(2):354-60. [Content Brief]
[2]. Tatsiana Ilyich, et al. Ferutinin Induces Membrane Depolarization, Permeability Transition Pore Formation, and Respiration Uncoupling in Isolated Rat Liver Mitochondria by Stimulation of Ca 2+-Permeability. J Membr Biol. 2018 Aug;251(4):563-572. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.7896 mL | 13.9482 mL | 27.8963 mL | 69.7408 mL |
| 5 mM | 0.5579 mL | 2.7896 mL | 5.5793 mL | 13.9482 mL | |
| 10 mM | 0.2790 mL | 1.3948 mL | 2.7896 mL | 6.9741 mL | |
| 15 mM | 0.1860 mL | 0.9299 mL | 1.8598 mL | 4.6494 mL | |
| 20 mM | 0.1395 mL | 0.6974 mL | 1.3948 mL | 3.4870 mL | |
| 25 mM | 0.1116 mL | 0.5579 mL | 1.1159 mL | 2.7896 mL | |
| 30 mM | 0.0930 mL | 0.4649 mL | 0.9299 mL | 2.3247 mL | |
| 40 mM | 0.0697 mL | 0.3487 mL | 0.6974 mL | 1.7435 mL | |
| 50 mM | 0.0558 mL | 0.2790 mL | 0.5579 mL | 1.3948 mL | |
| 60 mM | 0.0465 mL | 0.2325 mL | 0.4649 mL | 1.1623 mL | |
| 80 mM | 0.0349 mL | 0.1744 mL | 0.3487 mL | 0.8718 mL | |
| 100 mM | 0.0279 mL | 0.1395 mL | 0.2790 mL | 0.6974 mL |