Ro24-7429
Based on 2 publication(s) in Google Scholar
Ro24-7429 is a potent and orally active HIV-1 transactivator protein Tat antagonist. Ro24-7429 is also a runt-related transcription factor 1 (RUNX1) inhibitor. Ro24-7429 has anti-HIV, antifibrotic and anti-inflammatory effects.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.85%
- CAS No.: 139339-45-0
- Formule: C14H13ClN4
- Masse moléculaire:272.73
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Ro24-7429
More
Activité biologique
|
HIV-1 |
Ro 24-7429 (0.1-5 μM; 3 days) induces apoptosis of cultured PBMCs in a dose-dependent manner[1].
Ro 24-7429 (1-25 μM) also induces apoptosis and inhibits antigen-induced lymphocyte proliferation[1].
Ro24-7429 (50-200 μM; 24-72 hours) strongly inhibits the proliferation of A549 and HLF cells in a dose-dependent manner. Ro24-7429 treatment (75 μM) significantly reduces TNF-α-induced up-regulation of RUNX1 mRNA by 50% at 48 hours[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Peripheral blood mononuclear cells (PBMCs)
-
Concentration:0.1 μM, 1 μM, 5 μM
-
Incubation Time:3 days
-
Result:Induced a dose-dependent increase in apoptosis of cultured PBMCs.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6J male and female mice (aged 6 to 8 weeks) induced by Bleomycin[2]
-
Dosage:17.5 mg/kg, 35 mg/kg, and 70 mg/kg
-
Administration:i.p.; daily; for 14 or 21 days
-
Result:Ameliorated lung fibrosis and inflammation in the Bleomycin-induced PF mouse model.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 139339-45-0
-
Appearance Solid
-
Masse moléculaire 272.73
-
Formule C14H13ClN4
-
Color White to yellow
-
SMILES
CNC1=NC2=CC=C(Cl)C=C2C(C3=CC=CN3)=NC1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Biochemistry
Discovery of a Potent Tat-Binding Antiretroviral Compound Using a Two-Step Screening Approach. [Abstract]2025 Dec 16;64(24):4692-4705. PMID: 41312763 -
bioRxiv
Impaired SOX17 Expression Causes Endothelial Dysfunction and Pulmonary Arterial Hypertension by Insufficient Suppression of RUNX1. [Abstract]2026 May 15:2026.05.14.725187. PMID: 42182299
Solvant et solubilité
DMSO : 62.5 mg/mL (229.16 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 20 mg/mL (73.33 mM); Suspended solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (280 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. A H Patki, et al. HIV-1 Tat protein and its inhibitor Ro 24-7429 inhibit lymphocyte proliferation and induce apoptosis in peripheral blood mononuclear cells from healthy donors. Cell Immunol. 1996 Apr 10;169(1):40-6. [Content Brief]
[2]. Michael O'Hare, et al. Targeting Runt-Related Transcription Factor 1 Prevents Pulmonary Fibrosis and Reduces Expression of Severe Acute Respiratory Syndrome Coronavirus 2 Host Mediators. Am J Pathol. 2021 Jul;191(7):1193-1208. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.6666 mL | 18.3331 mL | 36.6663 mL | 91.6657 mL |
| 5 mM | 0.7333 mL | 3.6666 mL | 7.3333 mL | 18.3331 mL | |
| 10 mM | 0.3667 mL | 1.8333 mL | 3.6666 mL | 9.1666 mL | |
| 15 mM | 0.2444 mL | 1.2222 mL | 2.4444 mL | 6.1110 mL | |
| 20 mM | 0.1833 mL | 0.9167 mL | 1.8333 mL | 4.5833 mL | |
| 25 mM | 0.1467 mL | 0.7333 mL | 1.4667 mL | 3.6666 mL | |
| 30 mM | 0.1222 mL | 0.6111 mL | 1.2222 mL | 3.0555 mL | |
| 40 mM | 0.0917 mL | 0.4583 mL | 0.9167 mL | 2.2916 mL | |
| 50 mM | 0.0733 mL | 0.3667 mL | 0.7333 mL | 1.8333 mL | |
| 60 mM | 0.0611 mL | 0.3056 mL | 0.6111 mL | 1.5278 mL | |
| 80 mM | 0.0458 mL | 0.2292 mL | 0.4583 mL | 1.1458 mL | |
| 100 mM | 0.0367 mL | 0.1833 mL | 0.3667 mL | 0.9167 mL |