FSCPX
Based on 1 Customer Validation
FSCPX is a potent and selective irreversible antagonist of A1 adenosine receptor (A1AR), with low nanomolar potency for binding to the A1AR. FSCPX could modify the effect of NBTI, a nucleoside transport inhibitor, by reducing the interstitial adenosine level in the guinea pig atrium.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.72%
- CAS No.: 156547-56-7
- Formule: C23H27FN4O6S
- Masse moléculaire:506.55
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Voir tous les produits spécifiques à Isoform Adenosine Receptor
More
Activité biologique
A1AR[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| PC-12 | IC50 |
9 μM
Compound: 53
|
Inhibition of [3H]NECA binding to A2 adenosine receptor of PC12 cell membranes
Inhibition of [3H]NECA binding to A2 adenosine receptor of PC12 cell membranes
|
[PMID: 8064798] |
FSCPX irreversibly blocks the binding of [3H]-8-cyclopentyl-1,3dipropylxanthine ([3H]DPCPX), with an IC50 of 11.8±3.2 nM in DDT1 MF2 cells[1].
FSCPX (20 μM; 48 h) attenuates protection from necrosis and apoptosis in A1AR-overexpressing LLC-PK1 cells[3].
FSCPX (2-20 μM; 48 h) reverses the upregulation of HSP27 mRNA and protein in A1AR-overexpressing LLC-PK1 cells without an effect on the mRNA or protein for HSP70[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 156547-56-7
-
Appearance Solid
-
Masse moléculaire 506.55
-
Formule C23H27FN4O6S
-
Color White to off-white
-
SMILES
O=C(OCCCN(C(N1CCC)=O)C2=C(N=C(C3CCCC3)N2)C1=O)C4=CC=C(S(=O)(F)=O)C=C4
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 50 mg/mL (98.71 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Beauglehole AR, et, al. New irreversible adenosine A(1) antagonists based on FSCPX. Bioorg Med Chem Lett. 2002 Nov 4; 12(21): 3179-82. [Content Brief]
[2]. Erdei T, et, al. FSCPX, a Chemical Widely Used as an Irreversible A₁ Adenosine Receptor Antagonist, Modifies the Effect of NBTI, a Nucleoside Transport Inhibitor, by Reducing the Interstitial Adenosine Level in the Guinea Pig Atrium. Molecules. 2018 Aug 3 [Content Brief]
[3]. Lee HT, et, al. Renal tubule necrosis and apoptosis modulation by A1 adenosine receptor expression. Kidney Int. 2007 Jun;71(12):1249-61. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9741 mL | 9.8707 mL | 19.7414 mL | 49.3535 mL |
| 5 mM | 0.3948 mL | 1.9741 mL | 3.9483 mL | 9.8707 mL | |
| 10 mM | 0.1974 mL | 0.9871 mL | 1.9741 mL | 4.9353 mL | |
| 15 mM | 0.1316 mL | 0.6580 mL | 1.3161 mL | 3.2902 mL | |
| 20 mM | 0.0987 mL | 0.4935 mL | 0.9871 mL | 2.4677 mL | |
| 25 mM | 0.0790 mL | 0.3948 mL | 0.7897 mL | 1.9741 mL | |
| 30 mM | 0.0658 mL | 0.3290 mL | 0.6580 mL | 1.6451 mL | |
| 40 mM | 0.0494 mL | 0.2468 mL | 0.4935 mL | 1.2338 mL | |
| 50 mM | 0.0395 mL | 0.1974 mL | 0.3948 mL | 0.9871 mL | |
| 60 mM | 0.0329 mL | 0.1645 mL | 0.3290 mL | 0.8226 mL | |
| 80 mM | 0.0247 mL | 0.1234 mL | 0.2468 mL | 0.6169 mL |
Powered by Bioz