Hexahydrofarnesyl acetone
Based on 1 Customer Validation
Hexahydrofarnesyl acetone (6,10,14-Trimethyl-2-pentadecanone) is a oral active sesquiterpene with oral activity, exhibiting antibacterial, anti-inflammatory, and anticancer properties, and is used in pain relief research.
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 502-69-2
- Formula: C18H36O
- Molecular Weight:268.48
-
Storage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
All Antibiotic Isoforms
More
Biological Activity
The essential oil of Lindera nacusua (containing 6.83% Hexahydrofarnesyl acetone, 0.2 mg of essential oil, 0.1 mL microbial suspension, 24 hours) exhibits significant antibacterial activity against Staphylococcus aureus and Candida albicans, with inhibition zones reaching 2.5 mm and 2.0 mm, respectively, surpassing the positive control, Amoxicillin (HY-B0467A)[2]. The essential oil of Graptophyllum pictum (containing 2.6% Hexahydrofarnesyl acetone, 5 μL of essential oil, 3, 4, or 5 days) shows significant cytotoxicity against KB cells (epidermoid carcinoma of oral cavity), NCI-H187 cells (small cell lung carcinoma), and Vero cells (African green monkey kidney)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:KB cells (epidermoid carcinoma oforal cavity), MCF-7 cells (breast adenocarcinoma), NCI-H187 cells (small cell lung carcinoma) and Vero cells (the African green monkey kidney)
-
Concentration:5 μL (administered as essential oil containing 2.6% Hexahydrofarnesyl acetone)
-
Incubation Time:3 (KB and MCF-7 cells), 4 (Vero cells) or 5 (NCI-H187 cells) days
-
Result:Had the IC50 values of 27.04, 25.27, and 26.52 µg/mL against KB cells, NCI-H187 cells, and Vero cells, respectively.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Carrageenan (HY-125474)-induced paw edema model in Wistar rats (150-200 g)[1]
-
Dosage:100, 200, 400 mg/kg
-
Administration:Oral gavage (p.o.), single dose
-
Result:Exerted a significant dose-dependent inhibitory effect on the development of carrageenan (HY-125474)-induced paw swelling.
-
Animal Model:Formalin-induced pain model in Wistar rats (150-200 g)[1]
-
Dosage:100, 200, 400 mg/kg
-
Administration:Oral gavage (p.o.), single dose
-
Result:Increased the tolerance of rats to Formalin-induced pain.
Chemical Information
-
CAS No. 502-69-2
-
Appearance Liquid (Density: 0.8403 g/cm3)
-
Molecular Weight 268.48
-
Formula C18H36O
-
Color Colorless to light yellow
-
SMILES
CC(CCCC(C)CCCC(C)CCCC(C)C)=O
-
Synonyms
6,10,14-Trimethyl-2-pentadecanone
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 33.33 mg/mL (124.14 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (701 KB)
- English - EN (701 KB)
- Français - FR (701 KB)
- Deutsch - DE (701 KB)
- Norwegian - NO (701 KB)
- Español - ES (701 KB)
- Swedish - SV (701 KB)
- Italian - IT (701 KB)
- Korean - KR (701 KB)
- Portuguese - PT (701 KB)
-
Handling Instructions (2659 KB)
References
[1]. Opeyemi N Avoseh, et al.Albizia lebbeck and Albizia zygia volatile oils exhibit anti-nociceptive and anti-inflammatory properties in pain models.J Ethnopharmacol. 2021 Mar 25;268:113676 [Content Brief]
[2]. Guoqing Wei, et al. Essential oil composition and antibacterial activity of Lindera nacusua (D. Don) Merr. Nat Prod Res. 2016 Dec;30(23):2704-2706. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.7247 mL | 18.6234 mL | 37.2467 mL | 93.1168 mL |
| 5 mM | 0.7449 mL | 3.7247 mL | 7.4493 mL | 18.6234 mL | |
| 10 mM | 0.3725 mL | 1.8623 mL | 3.7247 mL | 9.3117 mL | |
| 15 mM | 0.2483 mL | 1.2416 mL | 2.4831 mL | 6.2078 mL | |
| 20 mM | 0.1862 mL | 0.9312 mL | 1.8623 mL | 4.6558 mL | |
| 25 mM | 0.1490 mL | 0.7449 mL | 1.4899 mL | 3.7247 mL | |
| 30 mM | 0.1242 mL | 0.6208 mL | 1.2416 mL | 3.1039 mL | |
| 40 mM | 0.0931 mL | 0.4656 mL | 0.9312 mL | 2.3279 mL | |
| 50 mM | 0.0745 mL | 0.3725 mL | 0.7449 mL | 1.8623 mL | |
| 60 mM | 0.0621 mL | 0.3104 mL | 0.6208 mL | 1.5519 mL | |
| 80 mM | 0.0466 mL | 0.2328 mL | 0.4656 mL | 1.1640 mL | |
| 100 mM | 0.0372 mL | 0.1862 mL | 0.3725 mL | 0.9312 mL |