LFHP-1c
Based on 3 publication(s) in Google Scholar
LFHP-1c is an PGAM5 inhibitor with neuroprotective activity in brain ischemic stroke. LFHP-1c protects blood-brain barrier integrity from ischemia-induced injury. LFHP-1c binds to endothelial PGAM5 to inhibit the activity of PGAM5 phosphatase and the interaction of PGAM5 with NRF2. LFHP-1c exhibits in vitro and in vivo protection.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.01%
- CAS No.: 2102347-47-5
- 화학식: C55H64N6O4
- 분자량:873.13
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
NF-κB Signaling Compound Library
HY-L014
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Neuroprotective Compound Library
HY-L070
-
Mitochondria-Targeted Compound Library
HY-L089
-
Lipid Metabolism Compound Library
HY-L091
-
Metabolic Enzyme Compound Library
HY-L146
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) LFHP-1c
MoreAll Phospholipase Isoforms
More
Biological Activity
LFHP-1c (1, 2, or 5 μmol/L; 9 h) treatment, and followed by hypoxic treatment, increases NRF2 protein expression and facilitates nuclear translocation of NRF2 in primary rat brain microvascular endothelial cells (rBMECs)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Primary rat brain microvascular endothelial cells (rBMECs)
-
Concentration:2 μmol/L
-
Incubation Time:1 h
-
Result:Bound to PGAM5, to facilitate nuclear translocation of NRF2.
LFHP-1c (3 mg/kg, 1 mL/kg; iv; 8 doses) ameliorates brain ischemic injury in tMCAO model of M. fascicularis through PGAM5–NRF2 axis[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Nonhuman primate Macaca fascicularis model with tMCAO[1]
-
Dosage:3 mg/kg, 1 mL/kg
-
Administration:IV; at 4 h, 1, 2, 3, 4, 5, 6 and 7 days after tMCAO onset.
-
Result:Reduced infarct volume, brain edema and neurological deficits in Transient MCAO model in M. fascicularis.
-
Animal Model:SD rats (230-250 g)[1]
-
Dosage:1 mg/kg, 5 mg/kg in 0.5 mL volume
-
Administration:IV; injected at 4 or 12 h after ischemia onset, and then injected another time at 24 h post-ischemia
-
Result:Dose-dependently protected rat brains against ischemia/reperfusion injury at 72 h after ischemia onset with a moderate therapeutic window.
Prevented BBB disruption and attenuated endothelial inflammation in rat cerebral microvessels at 72 h after ischemia onset.
Chemical Information
-
CAS No. 2102347-47-5
-
Appearance Solid
-
분자량 873.13
-
화학식 C55H64N6O4
-
Color White to off-white
-
SMILES
O=C(C)OC(CCCC)C1=C(C(NCCCCCCCCNC(C2=C(C3=CC=C(CN4C5=CC(C6=NC7=C(N6C)C=CC=C7)=CC(C)=C5N=C4CCC)C=C3)C=CC=C2)=O)=O)C=CC=C1
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Nature
2026 Mar;651(8105):451-461. PMID: 41535474 -
Free Radic Biol Med
Targeting PGAM5 attenuates airway inflammation in asthma by inhibiting HMGB1 release in bronchial epithelium. [Abstract]2025 Feb 16:228:207-220. PMID: 39756489 -
Cancers (Basel)
2025 May 6;17(9):1573. PMID: 40361499
용액&용해도
DMSO : 100 mg/mL (114.53 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 20% HS-15 70% Saline
Solubility: 2.5 mg/mL (2.86 mM); Suspended solution; Need ultrasonic
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.86 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.1453 mL | 5.7265 mL | 11.4530 mL | 28.6326 mL |
| 5 mM | 0.2291 mL | 1.1453 mL | 2.2906 mL | 5.7265 mL | |
| 10 mM | 0.1145 mL | 0.5727 mL | 1.1453 mL | 2.8633 mL | |
| 15 mM | 0.0764 mL | 0.3818 mL | 0.7635 mL | 1.9088 mL | |
| 20 mM | 0.0573 mL | 0.2863 mL | 0.5727 mL | 1.4316 mL | |
| 25 mM | 0.0458 mL | 0.2291 mL | 0.4581 mL | 1.1453 mL | |
| 30 mM | 0.0382 mL | 0.1909 mL | 0.3818 mL | 0.9544 mL | |
| 40 mM | 0.0286 mL | 0.1432 mL | 0.2863 mL | 0.7158 mL | |
| 50 mM | 0.0229 mL | 0.1145 mL | 0.2291 mL | 0.5727 mL | |
| 60 mM | 0.0191 mL | 0.0954 mL | 0.1909 mL | 0.4772 mL | |
| 80 mM | 0.0143 mL | 0.0716 mL | 0.1432 mL | 0.3579 mL | |
| 100 mM | 0.0115 mL | 0.0573 mL | 0.1145 mL | 0.2863 mL |
Powered by Bioz