(−)-Myrtenal
Based on 1 Customer Validation
(-)-Myrtenal ((1R)-(-)-Myrtenal) is an orally active terpene with antitumour activity. (-)-Myrtenal ameliorates hyperglycemia by enhancing GLUT2 through Akt in the skeletal muscle and liver of diabetic rats.
For research use only. We do not sell to patients.
- Purity: 99.29%
- CAS No.: 18486-69-6
- Formula: C10H14O
- Molecular Weight:150.22
-
Storage:
-20°C, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
(-)-Myrtenal ((1R)-(-)-Myrtenal; 0.1-5 mM; for 24 h) exerts strong cytotoxic effect (IC50=5.3 mM) on human colon tumour (HT29) and human normal colon epithelial cells (CCD 841 CoTr)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 18486-69-6
-
Appearance Liquid (Density: 0.988 g/cm3)
-
Molecular Weight 150.22
-
Formula C10H14O
-
Color Colorless to light yellow
-
SMILES
CC1([C@@H]2C(C=O)=CC[C@H]1C2)C
-
Synonyms
(1R)-(−)-Myrtenal; (−)-(1R,5S)-Myrtenal
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, stored under nitrogen
* The compound is unstable in solutions, freshly prepared is recommended.
Solvent & Solubility
DMSO : 100 mg/mL (665.69 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (16.64 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (16.64 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.6569 mL | 33.2845 mL | 66.5690 mL | 166.4226 mL |
| 5 mM | 1.3314 mL | 6.6569 mL | 13.3138 mL | 33.2845 mL | |
| 10 mM | 0.6657 mL | 3.3285 mL | 6.6569 mL | 16.6423 mL | |
| 15 mM | 0.4438 mL | 2.2190 mL | 4.4379 mL | 11.0948 mL | |
| 20 mM | 0.3328 mL | 1.6642 mL | 3.3285 mL | 8.3211 mL | |
| 25 mM | 0.2663 mL | 1.3314 mL | 2.6628 mL | 6.6569 mL | |
| 30 mM | 0.2219 mL | 1.1095 mL | 2.2190 mL | 5.5474 mL | |
| 40 mM | 0.1664 mL | 0.8321 mL | 1.6642 mL | 4.1606 mL | |
| 50 mM | 0.1331 mL | 0.6657 mL | 1.3314 mL | 3.3285 mL | |
| 60 mM | 0.1109 mL | 0.5547 mL | 1.1095 mL | 2.7737 mL | |
| 80 mM | 0.0832 mL | 0.4161 mL | 0.8321 mL | 2.0803 mL | |
| 100 mM | 0.0666 mL | 0.3328 mL | 0.6657 mL | 1.6642 mL |
(−)-Myrtenal Related Classifications
HY-121401A Related Classifications
Powered by Bioz