[Rh(cod)Cl]2
Based on 1 Customer Validation
[Rh(cod)Cl]2 (Chloro (1,5-cyclooctadiene) rhodium (I) dimer) is an organometallic rhodium (I) dimer precursor and platelet aggregation inhibitor. [Rh(cod)Cl]2 inhibits PAF-induced aggregation in washed rabbit platelets. [Rh(cod)Cl]2 inhibits aggregation induced by PAF, Thrombin, ADP and Collagen in human platelet-rich plasma. [Rh(cod)Cl]2 acts as a catalyst precursor for the hydrogenation of aromatic hydrocarbons, phenols, olefins and BINOL derivatives. [Rh(cod)Cl]2 is used in the research of cardiovascular diseases such as thromboinflammation-related disorders, tumor metastasis and atherosclerosis.
For research use only. We do not sell to patients.
- Purity: 99.91%
- CAS No.: 12092-47-6
- Formula: C16H24Cl2Rh2
- Molecular Weight:493.08
-
Storage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
![[Rh(cod)Cl]2 Chemical Structure](https://file.medchemexpress.com/product_pic/hy-y1094.gif "Click to View [Rh(cod)Cl]2 Chemical Structure")
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
HY-W018864
Tris(dibenzylideneacetonyl)bis-palladium
-
HY-Y1738
Tetrakis(triphenylphosphine)palladium
-
HY-W020940
Allylpalladium(II) chloride dimer
-
HY-W033728
Platinum(COD)dichloride
-
![[Rh(Cp-)Cl2]2](https://file.medchemexpress.com/product_pic/hy-w019734.gif)
HY-W019734
[Rh(Cp-)Cl2]2
-
HY-W048457
Palladium hydroxide on activated carbon(20%)(wetted with ca. 55% Water)
-
HY-W002072
Palladium (II) acetate
-
HY-W001951
Dirhodium tetraacetate
-
HY-W002087
Bis(acetonitrile)palladium(II) dichloride
-
HY-W010710
IPrAuCl
-
HY-W020955
Triphenylphosphinechlorogold
Biological Activity
[Rh(cod)Cl]2 inhibits washed rabbit platelet aggregation induced by platelet-activating factor (PAF), with an IC50 of 5.2 μM[1].
[Rh(cod)Cl]2 inhibits PAF-induced aggregation of human platelet-rich plasma, with an IC50 of 43.3 μM[1].
[Rh(cod)Cl]2 inhibits thrombin (HY-114164)-induced aggregation of human platelet-rich plasma with an IC50 of 16.7 μM[1].
[Rh(cod)Cl]2 inhibits ADP (HY-W010918)-induced aggregation of human platelet-rich plasma with an IC50 of 162 μM[1].
[Rh(cod)Cl]2 inhibits collagen (HY-NP003)-induced aggregation of human platelet-rich plasma, with an IC50 of 69.8 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 12092-47-6
-
Appearance Solid
-
Molecular Weight 493.08
-
Formula C16H24Cl2Rh2
-
Color Yellow to orange
-
SMILES
C1=C\CC/C=C\CC/1.C2/C=C\CC/C=C\C2.[Rh]3[ClH][Rh][ClH]3
-
Synonyms
Chloro(1,5-cyclooctadiene)rhodium(I) dimer
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
DMSO : 50 mg/mL (101.40 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.07 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0281 mL | 10.1403 mL | 20.2807 mL | 50.7017 mL |
| 5 mM | 0.4056 mL | 2.0281 mL | 4.0561 mL | 10.1403 mL | |
| 10 mM | 0.2028 mL | 1.0140 mL | 2.0281 mL | 5.0702 mL | |
| 15 mM | 0.1352 mL | 0.6760 mL | 1.3520 mL | 3.3801 mL | |
| 20 mM | 0.1014 mL | 0.5070 mL | 1.0140 mL | 2.5351 mL | |
| 25 mM | 0.0811 mL | 0.4056 mL | 0.8112 mL | 2.0281 mL | |
| 30 mM | 0.0676 mL | 0.3380 mL | 0.6760 mL | 1.6901 mL | |
| 40 mM | 0.0507 mL | 0.2535 mL | 0.5070 mL | 1.2675 mL | |
| 50 mM | 0.0406 mL | 0.2028 mL | 0.4056 mL | 1.0140 mL | |
| 60 mM | 0.0338 mL | 0.1690 mL | 0.3380 mL | 0.8450 mL | |
| 80 mM | 0.0254 mL | 0.1268 mL | 0.2535 mL | 0.6338 mL | |
| 100 mM | 0.0203 mL | 0.1014 mL | 0.2028 mL | 0.5070 mL |
[Rh(cod)Cl]2 Related Classifications
HY-Y1094 Related Classifications
Powered by Bioz