TM-04-064-02
Based on 1 Customer Validation
TM-04-064-02 is a molecular glue degrader. TM-04-064-02 induces proteins (such as IKZF1/3, PPIL4, ETF1 and PDE6D) to bind to CRBN, promoting their ubiquitination and degradation.
For research use only. We do not sell to patients.
- Purity : 98.60%
- Formula: C29H35N9O5
- Molecular Weight:589.65
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Description
IC50 & Target
[1]|
PDE6D |
IKZF1 |
IKZF3 |
Chemical Information
-
Appearance Solid
-
Molecular Weight 589.65
-
Formula C29H35N9O5
-
SMILES
O=C(NCCCCCCCCNC1=CC=CC2=C1C(N(C2=O)C3CCC(NC3=O)=O)=O)CCN4C=NC5=C(N=CN=C54)N
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
In Vitro:
DMSO : 100 mg/mL (169.59 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5 mg/mL (8.48 mM); Suspended solution; Need ultrasonic and warming and heat to 60°C
This protocol yields a suspended solution of 5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6959 mL | 8.4796 mL | 16.9592 mL | 42.3980 mL |
| 5 mM | 0.3392 mL | 1.6959 mL | 3.3918 mL | 8.4796 mL | |
| 10 mM | 0.1696 mL | 0.8480 mL | 1.6959 mL | 4.2398 mL | |
| 15 mM | 0.1131 mL | 0.5653 mL | 1.1306 mL | 2.8265 mL | |
| 20 mM | 0.0848 mL | 0.4240 mL | 0.8480 mL | 2.1199 mL | |
| 25 mM | 0.0678 mL | 0.3392 mL | 0.6784 mL | 1.6959 mL | |
| 30 mM | 0.0565 mL | 0.2827 mL | 0.5653 mL | 1.4133 mL | |
| 40 mM | 0.0424 mL | 0.2120 mL | 0.4240 mL | 1.0600 mL | |
| 50 mM | 0.0339 mL | 0.1696 mL | 0.3392 mL | 0.8480 mL | |
| 60 mM | 0.0283 mL | 0.1413 mL | 0.2827 mL | 0.7066 mL | |
| 80 mM | 0.0212 mL | 0.1060 mL | 0.2120 mL | 0.5300 mL | |
| 100 mM | 0.0170 mL | 0.0848 mL | 0.1696 mL | 0.4240 mL |