Pimobendan
Based on 3 publication(s) in Google Scholar
Pimobendan (UD-CG115) is a selective inhibitor of PDE3 with IC50 of 0.32 μM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.82%
- CAS. Nr.: 74150-27-9
- Formel: C19H18N4O2
- Molecular Weight:334.37
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Pimobendan
More
Biologische Aktivität
|
PDE3 |
Pimobendan (UD-CG115) exhibits selective inhibition of PDE III isolated from guinea pig cardiac muscle with IC50 of 0.32 uM compared to the inhibition of PDE I and PDE II (IC50 >30 μM). In human atrial cells, 100 μM Pimobendan (UD-CG115) significantly increases the L-type calcium current (ICa(L)) (evoked by depolarization to +10 mV from a holding potential of -40 mV) by 250.4% with the half-maximal stimulation (EC50 ) of 1.13 μM. In rabbit atrial cells, Pimobendan (UD-CG115) increases ICa(L) at +10 mV by 67.4.%, which is significantly lower than that obtained in human atrial cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 74150-27-9
-
Appearance Solid
-
Molecular Weight 334.37
-
Formel C19H18N4O2
-
Color White to off-white
-
SMILES
O=C1CC(C)C(C2=CC=C3N=C(C4=CC=C(OC)C=C4)NC3=C2)=NN1
-
Synonyms
UD-CG115
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Sci Signal
Airway relaxation mechanisms and structural basis of osthole for improving lung function in asthma. [Abstract]2020 Nov 24;13(659):eaax0273. PMID: 33234690 -
Pharmaceuticals (Basel)
Combined In Silico and In Vitro Evidence Supporting an Aurora A Kinase Inhibitory Role of the Anti-Viral Drug Rilpivirine and an Anti-Proliferative Influence on Cancer Cells. [Abstract]2022 Sep 25;15(10):1186. PMID: 36297298 -
Toxicol Lett
Discovery of non-steroidal aldo-keto reductase 1D1 inhibitors through automated screening and in vitro evaluation. [Abstract]2025 Apr:406:31-37. PMID: 39988211
Lösungsmittel & Löslichkeit
DMSO : 50 mg/mL (149.53 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.75 mg/mL (8.22 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.75 mg/mL (8.22 mM); Clear solution
This protocol yields a clear solution of ≥ 2.75 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (27.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Mice[2]
Since, in this model, most mice die of congestive heart failure within 14 days after EMC virus inoculation (21), the survival was observed up to 14 days in this study. Pimobendan was administered in doses of 0.1 mg/kg or 1 mg/kg daily for 14 days from the day of EMC virus inoculation while control mice received vehicles only. Thirty mice were randomly assigned to each group[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (274 KB)
-
SDS (480 KB)
- English - EN (480 KB)
- Français - FR (480 KB)
- Deutsch - DE (480 KB)
- Norwegian - NO (480 KB)
- Español - ES (480 KB)
- Swedish - SV (480 KB)
- Italian - IT (480 KB)
- Korean - KR (480 KB)
- Portuguese - PT (480 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Kajimoto K, et al. Contribution of phosphodiesterase isozymes to the regulation of the L-type calcium current in human cardiac myocytes. Br J Pharmacol. 1997 Aug;121(8):1549-56. [Content Brief]
[2]. Iwasaki A, et al. Pimobendan inhibits the production of proinflammatory cytokines and gene expression of inducible nitric oxide synthase in a murine model of viral myocarditis. J Am Coll Cardiol. 1999 Apr;33(5):1400-7. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9907 mL | 14.9535 mL | 29.9070 mL | 74.7675 mL |
| 5 mM | 0.5981 mL | 2.9907 mL | 5.9814 mL | 14.9535 mL | |
| 10 mM | 0.2991 mL | 1.4953 mL | 2.9907 mL | 7.4767 mL | |
| 15 mM | 0.1994 mL | 0.9969 mL | 1.9938 mL | 4.9845 mL | |
| 20 mM | 0.1495 mL | 0.7477 mL | 1.4953 mL | 3.7384 mL | |
| 25 mM | 0.1196 mL | 0.5981 mL | 1.1963 mL | 2.9907 mL | |
| 30 mM | 0.0997 mL | 0.4984 mL | 0.9969 mL | 2.4922 mL | |
| 40 mM | 0.0748 mL | 0.3738 mL | 0.7477 mL | 1.8692 mL | |
| 50 mM | 0.0598 mL | 0.2991 mL | 0.5981 mL | 1.4953 mL | |
| 60 mM | 0.0498 mL | 0.2492 mL | 0.4984 mL | 1.2461 mL | |
| 80 mM | 0.0374 mL | 0.1869 mL | 0.3738 mL | 0.9346 mL | |
| 100 mM | 0.0299 mL | 0.1495 mL | 0.2991 mL | 0.7477 mL |