LX2343
Based on 1 Customer Validation
LX2343 is a BACE1 enzyme inhibitor with an IC50 value of 11.43±0.36 μM. LX2343 acts as a non-ATP competitive PI3K inhibitor with an IC50 of 15.99±3.23 μM. LX2343 stimulates autophagy in its promotion of Aβ clearance.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.77%
- CAS No.: 333745-53-2
- Formule: C22H19ClN2O6S
- Masse moléculaire:474.91
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
BACE1 11.43 μM (IC50) |
PI3K 15.99 μM (IC50) |
Aβ |
Autophagy |
LX2343 (5-20 μM) dose-dependently decreased Aβ accumulation in HEK293-APPsw and CHO-APP cells, and promotes Aβ clearance in SH-SY5Y cells and primary astrocytes. LX2343 ameliorates cognitive dysfunction in APP/PS1 transgenic mice via both Aβ production inhibition and clearance promotion, which highlights the potential of LX2343 in the treatment of AD. Western blot results in both HEK293-APPsw cells and CHO-APP cells demonstrate that LX2343 fails to regulate BACE1 protein levels, while in vitro BACE1 enzymatic activity assays indicated that LX2343 dose-dependently decreases BACE1 activity (TDC as a positive control) with an IC50 of 11.43±0.36 μM. To test whether competition exists between LX2343 and ATP, we investigated the effects of ATP at different concentrations on the inhibitory activity of LX2343. The result demonstrated that the inhibition of LX2343 against PI3K is virtually unaffected by ATP. Thus, this result suggested that LX2343 is a non-ATP competitive inhibitor of PI3K. In the presence of 10 μM of ATP, the IC50 of LX2343 is 13.11±1.47 μM, in the presence of 50 μM ATP, the IC50 of LX2343 is 13.86±1.12 μM, in the presence of 100 μM ATP, the IC50 of LX2343 is 15.99±3.23 μM [1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 333745-53-2
-
Appearance Solid
-
Masse moléculaire 474.91
-
Formule C22H19ClN2O6S
-
Color White to off-white
-
SMILES
O=C(NC1=CC=C(OCO2)C2=C1)CN(C3=CC(Cl)=CC=C3OC)S(=O)(C4=CC=CC=C4)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : ≥ 100 mg/mL (210.57 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.26 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Inhibition of BACE1 enzyme by LX2343 is assayed using BACE1 activity kits in vitro. Briefly, BACE1 substrate (250 nM), BACE1 enzyme (0.35 U/mL), and varied concentrations of LX2343 (5, 10, and 20 μM) are sequentially incubated for 1 h at 37°C in the dark. Fluorescence intensity is measured with excitation and emission wavelengths at 545 and 585 nm, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
SH-SY5Y cells are transfected with mRFP-GFP-LC3 plasmids via an adenovirus. The cells are treated without or with Streptozotocin (0.8 mM) in combination with 5 or 20 μM LX2343 for 4 h and then fixed with 4% paraformaldehyde and observed using an Olympus Fluoview FV1000 confocal microscope[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Mice[1]
APP/PS1 [B6C3-Tg(APPswe, PS1dE9)] transgenic mice are used. Genotyping to confirm APP/PS1 DNA sequences in their offspring is performed by assaying the DNA from tail biopsies, with Tg-negative mice as a negative control. Twenty male APP/PS1 mice are divided into two groups with ten non-transgenic mice in one group to serve as a negative control. The two 6-month transgenic groups are administered 10 mg/kg per day of LX2343 or vehicle, and the 6-month non-transgenic group is administered the vehicle for 100 d via intraperitoneal injection. After 100 d of administration, MWM assays are applied to evaluate the cognitive abilities of the mice for 8 d under continuous LX2343 treatment. Upon completion of the MWM test, the mice are euthanized, and the brains are removed and bisected at the mid-sagittal plane. The right hemispheres are frozen and stored at -80°C, and the left hemispheres are fixed in 4% paraformaldehyde[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (282 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1057 mL | 10.5283 mL | 21.0566 mL | 52.6416 mL |
| 5 mM | 0.4211 mL | 2.1057 mL | 4.2113 mL | 10.5283 mL | |
| 10 mM | 0.2106 mL | 1.0528 mL | 2.1057 mL | 5.2642 mL | |
| 15 mM | 0.1404 mL | 0.7019 mL | 1.4038 mL | 3.5094 mL | |
| 20 mM | 0.1053 mL | 0.5264 mL | 1.0528 mL | 2.6321 mL | |
| 25 mM | 0.0842 mL | 0.4211 mL | 0.8423 mL | 2.1057 mL | |
| 30 mM | 0.0702 mL | 0.3509 mL | 0.7019 mL | 1.7547 mL | |
| 40 mM | 0.0526 mL | 0.2632 mL | 0.5264 mL | 1.3160 mL | |
| 50 mM | 0.0421 mL | 0.2106 mL | 0.4211 mL | 1.0528 mL | |
| 60 mM | 0.0351 mL | 0.1755 mL | 0.3509 mL | 0.8774 mL | |
| 80 mM | 0.0263 mL | 0.1316 mL | 0.2632 mL | 0.6580 mL | |
| 100 mM | 0.0211 mL | 0.1053 mL | 0.2106 mL | 0.5264 mL |
LX2343 Related Classifications
HY-111383 Related Classifications
Powered by Bioz