Tibenelast sodium
Based on 1 Customer Validation
Tibenelast sodium is a phosphodiesterase inhibitor.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.66%
- CAS No.: 105102-18-9
- Formule: C13H13NaO4S
- Masse moléculaire:288.29
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Description
IC50 & Target
phosphodiesterase[1]
In Vitro
The effect of the phosphodiesterase inhibitor Tibenelast, and placebo on isoproterenol-induced changes in heart rate, cAMP and norepinephrine levels in normal male volunteers is studied. Tibenelast increases the heart rate response to isoproterenol infusion, whereas norepinephrine and cAMP levels are not different in any treatment[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 105102-18-9
-
Appearance Solid
-
Masse moléculaire 288.29
-
Formule C13H13NaO4S
-
Color White to off-white
-
SMILES
O=C(C1=CC2=CC(OCC)=C(OCC)C=C2S1)[O-].[Na+]
-
Synonyms
LY 186655
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
In Vitro:
DMSO : 50 mg/mL (173.44 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.67 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.21 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Schwertschlag US, et al. Effect of tibenelast (a phosphodiesterase inhibitor) and theophylline on isoproterenol-stimulated heart rate, cyclic AMP and norepinephrine levels. Pharmacology. 1993;46(3):142-7. [Content Brief]
[2]. Ho PP, et al. Tibenelast, 5,6-diethoxybenzo(B)thiophene-2-carboxylic acid, sodium salt (LY186655), is an orally active anti-asthma compound in the guinea pig. Life Sci. 1990;46(13):917-25. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.4687 mL | 17.3436 mL | 34.6873 mL | 86.7182 mL |
| 5 mM | 0.6937 mL | 3.4687 mL | 6.9375 mL | 17.3436 mL | |
| 10 mM | 0.3469 mL | 1.7344 mL | 3.4687 mL | 8.6718 mL | |
| 15 mM | 0.2312 mL | 1.1562 mL | 2.3125 mL | 5.7812 mL | |
| 20 mM | 0.1734 mL | 0.8672 mL | 1.7344 mL | 4.3359 mL | |
| 25 mM | 0.1387 mL | 0.6937 mL | 1.3875 mL | 3.4687 mL | |
| 30 mM | 0.1156 mL | 0.5781 mL | 1.1562 mL | 2.8906 mL | |
| 40 mM | 0.0867 mL | 0.4336 mL | 0.8672 mL | 2.1680 mL | |
| 50 mM | 0.0694 mL | 0.3469 mL | 0.6937 mL | 1.7344 mL | |
| 60 mM | 0.0578 mL | 0.2891 mL | 0.5781 mL | 1.4453 mL | |
| 80 mM | 0.0434 mL | 0.2168 mL | 0.4336 mL | 1.0840 mL | |
| 100 mM | 0.0347 mL | 0.1734 mL | 0.3469 mL | 0.8672 mL |
Tibenelast sodium Related Classifications
HY-101705 Related Classifications
Powered by Bioz