Burixafor hydrobromide
Based on 2 publication(s) in Google Scholar
Burixafor (TG-0054) hydrobromide is a potent CXCR4 antagonist with a pIC50 of 7.4. Burixafor hydrobromide inhibits the binding of CXCL12 to CXCR4, antagonizes CXCL12-induced recruitment of Gαᵢ and β-arrestin2, and blocks the downstream Gαᵢ-mediated inhibitory effect on cAMP signal transduction. Burixafor hydrobromide mobilizes CD34+ hematopoietic stem/progenitor cells (HSPC) from the bone marrow to the peripheral blood. Burixafor hydrobromide can be used for research on autologous hematopoietic stem cell transplantation (ASCT).
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.70%
- No. CAS: 1191450-19-7
- Fòrmula: C27H51N8O3P.5/2HBr
- Peso molecular:769.01
-
Almacenamiento:
-20°C, stored under nitrogen, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Burixafor hydrobromide
More
Actividad biológica
|
CXCR4 |
Burixafor hydrobromide potently displaces CXCL12 from its binding to CXCR4 on HEK293 cells stably expressing SNAP-CXCR4, with a pIC50 of 7.4[1].
Burixafor hydrobromide potently inhibits CXCL12-induced recruitment of miniGαᵢ to CXCR4 in transiently transfected HEK293 cells, with a pIC50 of 7.7[1].
Burixafor hydrobromide potently inhibits CXCL12-induced recruitment of β-arrestin2 to CXCR4 in transiently transfected HEK293 cells, with a pIC50 of 8.0[1].
Burixafor hydrobromide potently reverses CXCL12-mediated, CXCR4-dependent inhibition of cAMP in HEK293 cells stably expressing CXCR4, with a pIC50 of 7.9[1].
Burixafor hydrobromide acts as a potent inverse agonist on constitutively active CXCR4N119S mutant in transiently transfected HEK293 cells, with a pIC50 of 7.5[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Burixafor hydrobromide decreases acute rejection incidence and suppresses cardiac allograft vasculopathy in a Mycophenolate (HY-B0421)-treated swine heart transplant model[1].
Burixafor hydrobromide mobilizes hematopoietic stem/progenitor cells in mice, with enhanced efficacy when co-administered with Propranolol (HY-B0573B)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 1191450-19-7
-
Appearance Solid
-
Peso molecular 769.01
-
Fòrmula C27H51N8O3P.5/2HBr
-
Color Light yellow to yellow
-
SMILES
NC1=CC(N2CCN(CCP(O)(O)=O)CC2)=NC(NC[C@H]3CC[C@H](CNCCCNC4CCCCC4)CC3)=N1.[H]Br
-
Synonyms
TG-0054 hydrobromide
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, stored under nitrogen, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Int J Mol Sci
Multiplex Detection of Fluorescent Chemokine Binding to CXC Chemokine Receptors by NanoBRET. [Abstract]2024 May 4;25(9):5018. PMID: 38732237 -
Mol Pharmacol
Pharmacological characterization of a clinical candidate, TG-0054, a small molecule inverse agonist targeting CXCR4. [Abstract]2025 Apr;107(4):100015. PMID: 40156952
Solvente y solubilidad
H2O : 50 mg/mL (65.02 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 20 mg/mL (26.01 mM); Clear solution; Need ultrasonic
Pureza y Documentación
-
Ficha de datos (272 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Pan KS, et al. Pharmacological characterization of a clinical candidate, TG-0054, a small molecule inverse agonist targeting CXCR4. Mol Pharmacol. 2025;107(4):100015. [Content Brief]
[2]. Sukhtankar DD, et al. Burixafor, a CXCR4 inhibitor with a differentiated kinetics profile: results of a phase 2 study for rapid cell mobilization in multiple myeloma and lymphoma patients undergoing transplant. Ann Hematol. 2026;105(3):86. Published 2026 Feb 4. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 1.3004 mL | 6.5019 mL | 13.0037 mL | 32.5093 mL |
| 5 mM | 0.2601 mL | 1.3004 mL | 2.6007 mL | 6.5019 mL | |
| 10 mM | 0.1300 mL | 0.6502 mL | 1.3004 mL | 3.2509 mL | |
| 15 mM | 0.0867 mL | 0.4335 mL | 0.8669 mL | 2.1673 mL | |
| 20 mM | 0.0650 mL | 0.3251 mL | 0.6502 mL | 1.6255 mL | |
| 25 mM | 0.0520 mL | 0.2601 mL | 0.5201 mL | 1.3004 mL | |
| 30 mM | 0.0433 mL | 0.2167 mL | 0.4335 mL | 1.0836 mL | |
| 40 mM | 0.0325 mL | 0.1625 mL | 0.3251 mL | 0.8127 mL | |
| 50 mM | 0.0260 mL | 0.1300 mL | 0.2601 mL | 0.6502 mL | |
| 60 mM | 0.0217 mL | 0.1084 mL | 0.2167 mL | 0.5418 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Burixafor hydrobromide Related Classifications
HY-19867A Related Classifications
Powered by Bioz