Hcyb1
Based on 1 Customer Validation
Hcyb1 is a highly selective, orally active PDE2 inhibitor. Hcyb1 has a highly selective inhibition of PDE2A (IC50=0.57 μM) and over 250-fold selectivity against other recombinant PDE family members. Hcyb1 produces neuroprotective and antidepressant‐like effects most likely mediated by cAMP/cGMP-CREB-BDNF signaling.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 98.20%
- No. CAS: 2988566-71-6
- Fòrmula: C24H20N4O
- Peso molecular:380.44
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Orally Active Compound Library
HY-L061
-
Anti-Alzheimer's Disease Compound Library
HY-L069
-
Neuroprotective Compound Library
HY-L070
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Anti-Obesity Compound Library
HY-L087
-
Transcription Factor-Targeted Library
HY-L090
-
Anti-Colorectal Cancer Compound Library
HY-L103
-
Antidepressant Compound Library
HY-L108
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Pain-Related Compound Library
HY-L139
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Metabolism/Protease Compound Library
HY-L012
Actividad biológica
|
PDE2 |
Hcyb1 (1~100 nM; 10 minutes) increases cGMP levels by 1.7~2.3 folds[1].
Hcyb1 (1 nM; 24 hours) increases both cGMP and cAMP levels[1].
Hcyb1 (24 hours) treatment also increases the levels of phosphorylation of CREB and BDNF in HT-22 cells[1].
Hcyb1 promotes HT-22 cell viability and increase the cGMP and cAMP accumulation in HT-22 cells[1].
Hcyb1 exhibits the concentration- and time-dependent effects on cell viability in HT-22 cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HT-22 cells
-
Concentration:1 pM, 0.01 nM, 0.1 nM, 1 nM, 0.01 μM, 0.1 μM, 1 μM, 10 μM
-
Incubation Time:24 hours
-
Result:The cell viability was significantly increased when treatment HT-22 cells with Hcyb1 at concentrations of 0.1 nM and 1 nM for 24 hours. The time-dependent effects showed that the cell viability was significantly increased from 12 to 24 hours when treatment at concentration of 1 nM. The maximal effects peaked at 24 hours after treatment.
-
Cell Line:HT-22 cells
-
Concentration:1 nM
-
Incubation Time:24 hours
-
Result:Induced a significant increase in the phosphorylation of CREB. BDNF expression was also significantly upregulated at the same concentration.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male imprinting control region (ICR) mice, weighing between 20 and 25 g[3]
-
Dosage:0.5, 1, and 2 mg/kg
-
Administration:Gavage (i.g.)
-
Result:Exhibited dose-dependent reduction in immobility time at doses of 0.5, 1, 2 mg/kg (i.g.).
Chemical Information
-
No. CAS 2988566-71-6
-
Appearance Solid
-
Peso molecular 380.44
-
Fòrmula C24H20N4O
-
Color White to off-white
-
SMILES
O=C1NC(CC2=CC=CC=C2)=NC3=C1N=CN3C(C)C4=C5C=CC=CC5=CC=C4
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 62.5 mg/mL (164.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.47 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (279 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Li Liu, et al. The neuroprotective and antidepressant-like effects of Hcyb1, a novel selective PDE2 inhibitor. CNS Neurosci Ther. 2018 Jul;24(7):652-660. [Content Brief]
[2]. Meng-Jia Zhu, et al. Phosphodiesterase 2 inhibitor Hcyb1 reverses corticosterone-induced neurotoxicity and depression-like behavior. Psychopharmacology (Berl). 2020 Nov;237(11):3215-3224. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6285 mL | 13.1427 mL | 26.2854 mL | 65.7134 mL |
| 5 mM | 0.5257 mL | 2.6285 mL | 5.2571 mL | 13.1427 mL | |
| 10 mM | 0.2629 mL | 1.3143 mL | 2.6285 mL | 6.5713 mL | |
| 15 mM | 0.1752 mL | 0.8762 mL | 1.7524 mL | 4.3809 mL | |
| 20 mM | 0.1314 mL | 0.6571 mL | 1.3143 mL | 3.2857 mL | |
| 25 mM | 0.1051 mL | 0.5257 mL | 1.0514 mL | 2.6285 mL | |
| 30 mM | 0.0876 mL | 0.4381 mL | 0.8762 mL | 2.1904 mL | |
| 40 mM | 0.0657 mL | 0.3286 mL | 0.6571 mL | 1.6428 mL | |
| 50 mM | 0.0526 mL | 0.2629 mL | 0.5257 mL | 1.3143 mL | |
| 60 mM | 0.0438 mL | 0.2190 mL | 0.4381 mL | 1.0952 mL | |
| 80 mM | 0.0329 mL | 0.1643 mL | 0.3286 mL | 0.8214 mL | |
| 100 mM | 0.0263 mL | 0.1314 mL | 0.2629 mL | 0.6571 mL |
Hcyb1 Related Classifications
HY-132993 Related Classifications
Powered by Bioz