MTI-31
Based on 1 publication(s) in Google Scholar
MTI-31 (LXI-15029) is a potent, orally active and highly selective inhibitor of mTORC1 and mTORC2. MTI-31 is selective for mTOR (Kd: 0.20 nM) versus PIK3CA, PIK3CB and PIK3G with >5,000 fold selectivity in mTOR binding assays. MTI-31 shows an IC50 of 39 nM for mTOR in LANCE assay of mTOR substrate phosphorylation with 100 μM ATP. MTI-31 can be used for the research of breast cancer.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.98%
- No. CAS: 1567915-38-1
- Fòrmula: C26H30N6O3
- Peso molecular:474.55
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) MTI-31
More
Actividad biológica
|
mTOR 0.2 nM (Ki) |
mTOR 39 nM (IC50, 100 μM ATP) |
mTORC1 |
mTORC2 |
MTI-31 acts as a potent and selective inhibitor of mTOR enzymatic activity capable of targeting both mTORC1 and mTORC2 functions in cancer cells[1].
MTI-31 (0.01-100 μM) elicits a potent and more substantial inhibition of cell growth than that of Rapamycin[1].
Treatment with MTI-31 for 6 h demonstrates a dose-dependent inhibition of both the mTORC1 substrates P-S6K1(T389), P-S6(S235/6), P-4EBP1(T70) and mTORC2 substrate P-AKT(S473), achieving 50% inhibition at ≤0.12 μM in three representative tumor cell lines harboring mTOR pathway dysregulation (786-O renal, U87MG glioma and MDA-MB-453 breast)[1].
MTI-31-induced apoptosis requires mTORC2-regulated Bim- and GSK3 activity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MDA-MB-453 cells
-
Concentration:0.01, 0.1, 1, 10, 100 μM
-
Incubation Time:3 days
-
Result:Significantly inhibited cellular proliferation after treatment for 3 days.
-
Cell Line:786-O renal, U87MG glioma and MDA-MB-453 breast cells
-
Concentration:0.12, 0.37, 1.11, 3.33, 10 μM
-
Incubation Time:6 hours
-
Result:Demonstrated a dose-dependent inhibition of both the mTORC1 substrates P-S6K1(T389), P-S6(S235/6), P-4EBP1(T70) and mTORC2 substrate P-AKT(S473).
Treatment of tumor bearing nude mice with orally administered MTI-31 inhibits growth of H1975 tumors (25 mg/kg/d; orally) or U87MG tumors (30 mg/kg/d; orally)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female nude mice bearing tumors of MDA-MB-453, 786-O or HCC1806[1]
-
Dosage:2.5, 5, 10, 20, 40 mg/kg for MDA-MB-453 and 786-O; 20 and 40 mg/kg for HCC1806
-
Administration:Treated orally via a once daily (qd) regimen
-
Result:Was efficacious in several tumor models harboring HER2+/PIK3CAmut and/or PTEN-deficiency exemplified by MDA-MB-453 and 786-O. Demonstrated a dose proportional tumor growth inhibition (TGI) with a minimum efficacious dose (MED) of 5 mg/kg (>50% TGI, p<0.01) and a maximum tolerated dose (MTD) of 40 mg/kg (7-15% body weight loss without mortality).
In contrast, had limited efficacy in the HER2-/PIK3CAwt HCC1806 breast tumor model even at the highest 40 mg/kg.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
No. CAS 1567915-38-1
-
Appearance Solid
-
Peso molecular 474.55
-
Fòrmula C26H30N6O3
-
Color White to yellow
-
SMILES
C[C@@H]1N(CCOC1)C2=NC3=C(C=CC(C4=CC(C(NC)=O)=CC=C4)=N3)C(N5C6CCC5COC6)=N2
-
Synonyms
LXI-15029
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Antiviral Res
Large-scale deep learning identifies the antiviral potential of PKI-179 and MTI-31 against coronaviruses. [Abstract]2024 Nov:231:106012. PMID: 39332537
Solvente y solubilidad
DMSO : 8.33 mg/mL (17.55 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 0.83 mg/mL (1.75 mM); Clear solution
This protocol yields a clear solution of ≥ 0.83 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (8.3 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 5 mg/mL (10.54 mM); Suspended solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (280 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Zhang Q, et, al. A Novel mTORC1/2 Inhibitor (MTI-31) Inhibits Tumor Growth, Epithelial-Mesenchymal Transition, Metastases, and Improves Antitumor Immunity in Preclinical Models of Lung Cancer. Clin Cancer Res. 2019 Jun 15;25(12):3630-3642. [Content Brief]
[2]. Qian J, et, al. Molecular regulation of apoptotic machinery and lipid metabolism by mTORC1/mTORC2 dual inhibitors in preclinical models of HER2+/PIK3CAmut breast cancer. Oncotarget. 2016 Oct 11;7(41):67071-67086. [Content Brief]
[3]. Wang X, et, al. Non-immunogenic, low-toxicity and effective glioma targeting MTI-31 liposomes . J Control Release. 2019 Dec 28;316:381-392. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1073 mL | 10.5363 mL | 21.0726 mL | 52.6815 mL |
| 5 mM | 0.4215 mL | 2.1073 mL | 4.2145 mL | 10.5363 mL | |
| 10 mM | 0.2107 mL | 1.0536 mL | 2.1073 mL | 5.2681 mL | |
| 15 mM | 0.1405 mL | 0.7024 mL | 1.4048 mL | 3.5121 mL |
MTI-31 Related Classifications
HY-126077 Related Classifications
Powered by Bioz