Azomycin
Based on 1 Customer Validation
Azomycin (2-Nitroimidazole) is an antibiotic which can be active against aerobic Gram-positive and Gram-negative bacteria.
For research use only. We do not sell to patients.
- Purity: 99.17%
- CAS No.: 527-73-1
- Formula: C3H3N3O2
- Molecular Weight:113.08
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
All Antibiotic Isoforms
More
Biological Activity
Bacterial[1]
Azomycin is an antibiotic which can be active against aerobic Gram-positive and Gram-negative bacteria. It is found that Azomycin is also active against a variety of anaerobic bacteria[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 527-73-1
-
Appearance Solid
-
Molecular Weight 113.08
-
Formula C3H3N3O2
-
Color White to yellow
-
SMILES
O=[N+]([O-])C1=NC=CN1
-
Synonyms
2-Nitroimidazole
-
Structure Classification
-
Initial Source
Nocardia mesenterica
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 50 mg/mL (442.16 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.67 mg/mL (23.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (26.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (481 KB)
- English - EN (481 KB)
- Français - FR (481 KB)
- Deutsch - DE (481 KB)
- Norwegian - NO (481 KB)
- Español - ES (481 KB)
- Swedish - SV (481 KB)
- Italian - IT (481 KB)
- Korean - KR (481 KB)
- Portuguese - PT (481 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 8.8433 mL | 44.2165 mL | 88.4330 mL | 221.0824 mL |
| 5 mM | 1.7687 mL | 8.8433 mL | 17.6866 mL | 44.2165 mL | |
| 10 mM | 0.8843 mL | 4.4216 mL | 8.8433 mL | 22.1082 mL | |
| 15 mM | 0.5896 mL | 2.9478 mL | 5.8955 mL | 14.7388 mL | |
| 20 mM | 0.4422 mL | 2.2108 mL | 4.4216 mL | 11.0541 mL | |
| 25 mM | 0.3537 mL | 1.7687 mL | 3.5373 mL | 8.8433 mL | |
| 30 mM | 0.2948 mL | 1.4739 mL | 2.9478 mL | 7.3694 mL | |
| 40 mM | 0.2211 mL | 1.1054 mL | 2.2108 mL | 5.5271 mL | |
| 50 mM | 0.1769 mL | 0.8843 mL | 1.7687 mL | 4.4216 mL | |
| 60 mM | 0.1474 mL | 0.7369 mL | 1.4739 mL | 3.6847 mL | |
| 80 mM | 0.1105 mL | 0.5527 mL | 1.1054 mL | 2.7635 mL | |
| 100 mM | 0.0884 mL | 0.4422 mL | 0.8843 mL | 2.2108 mL |