PKHB1
Based on 1 Customer Validation
PKHB1 (txCD47) is a CD47 agonist and Thrombospondin-1 peptide mimetic. PKHB1 activates CD47 and triggers Caspase-independent, calcium-dependent cell death via mitochondrial alterations, ROS production, endoplasmic reticulum morphological changes, and dissipation of mitochondrial membrane potential. PKHB1 induces the exposure of Calreticulin, HSP70, and HSP90, thereby driving immunogenic cell death. PKHB1 promotes intratumoral CD8+ T cell infiltration and inhibits breast tumorigenesis. PKHB1 reduces HSV-1 levels and alleviates the severity of herpes simplex keratitis. PKHB1 can be used in research related to breast cancer, herpes simplex keratitis, and T-cell acute lymphoblastic leukemia.
For research use only. We do not sell to patients.
- Purity : 99.84%
- CAS No.: 1505523-99-8
- Formula: C68H105N17O12S
- Molecular Weight:1384.73
-
Storage:
Sealed storage, away from moisture.
Powder -80°C, 2 years , -20°C, 1 year* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
Description
IC50 & Target
[1]|
HSV-1 |
HSP70 |
HSP90 |
In Vitro
PKHB1 (100-400 μM; 2 h) induces concentration-dependent cell death in MCF-7, MDA-MB-231 and 4T1 breast cancer cells, with CC50 values of approximately 200 μM, 200 μM and 300 μM, respectively[1].
PKHB1 (200-300 μM; 2 h) induces loss of mitochondrial membrane potential, ROS production, and intracellular Ca2+ accumulation in MCF-7, MDA-MB-231, and 4T1 breast cancer cells at its CC50 concentration[1].
PKHB1 (200-300 μM; 2 h) induces the surface exposure of CALR, HSP70 and HSP90 on MCF-7, MDA-MB-231 and 4T1 breast cancer cells at its CC50 concentration[1].
The PKHB1 peptide (0-500 μM; 24 h) exhibits low cytotoxicity against HCECs, B4G12 cells, RAW264.7 cells, and THP1 cells[2].
At a concentration of 100 μM, the PKHB1 peptide does not directly inhibit HSV-1 replication in HSV-1-infected HCECs in the absence of immune cells[2].
PKHB1 (200 μM; 2 h) induces caspase-independent, calcium-dependent cell death and mitochondrial transmembrane potential loss in CCRF-CEM, MOLT-4 and L5178Y-R cells[3].
Incubation with PKHB1 (200-300 μM; 2 h) at the CC50 concentration for 2 hours across various cell lines induces significant calreticulin exposure on the surface of CCRF-CEM, MOLT-4 and L5178Y-R cells[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
-
Cell Line:human corneal epithelial cells (HCECs), human corneal endothelial cells (B4G12), mouse monocyte-macrophage leukemia cells (RAW264.7), human myeloid leukemia mononuclear cells (THP-1)
-
Concentration:0-500 μM (peptide treatment)
-
Incubation Time:24 h (peptide treatment); 2 h (CCK-8 reagent)
-
Result:Remained above 50% in B4G12 cells at 500 μM.
Showed CC50 values greater than 200 μM.
In Vivo
PKHB1 (200 µM; subconjunctival injection; 1 day before infection, 1 day after infection, 2 days after infection) prolongs the survival of mice with herpes simplex keratitis (HSK), reduces the replication level of HSV-1 in ocular tissues, alleviates the severity of HSK, and enhances the antiviral immune response by increasing the recruitment of antigen-presenting cells and CD8+ T cells[2].
PKHB1 (200 μg; intraperitoneal injection; once weekly for 6 consecutive weeks) induces complete tumor regression in L5178Y-R tumor-bearing BALB/c mice, restores white blood cell counts to healthy levels, and provides long-term anti-tumor protection, resulting in a 90% survival rate in mice after secondary challenge[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:BALB/c (female, 6- to 8-week-old, 22 g weight, subcutaneous inoculation of 5 × 105 live 4T1 cells)[1]
-
Dosage:400 μg
-
Administration:i.p.; daily
-
Result:Reduced mean tumor volume to 570 mm3 (vs control 1500 mm3), achieving 62% tumor volume reduction.
Reduced mean tumor weight to 0.40 grams (vs control 1.5 grams), achieving 73% tumor weight reduction.
Increased percentage of CD3+ cells in blood, lymph nodes, and tumors.
Increased CD4+ cells in lymph nodes but decreased them in tumors.
Increased CD8+ T cells in peripheral blood and tumor sites but decreased them in lymph nodes.
Reduced blood MDSCs from 48% to 23%.
Reduced blood Tregs from 12% to 3%.
Increased CD8/Tregs ratio from 2% to 14%.
Induced 75% calcein-negative 4T1 cells in splenocyte co-culture (vs control 40%).
Chemical Information
-
CAS No. 1505523-99-8
-
Appearance Solid
-
Molecular Weight 1384.73
-
Formula C68H105N17O12S
-
Color White to off-white
-
Synonyms
txCD47
-
Sequence
{d-Lys}-Arg-Phe-Tyr-Val-Val-Met-Trp-Lys-{d-Lys}
-
Sequence Shortening
{d-Lys}-RFYVVMWK-{d-Lys}
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Sealed storage, away from moisture
Powder -80°C 2 years -20°C 1 year * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
H2O : ≥ 50 mg/mL (36.11 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Protocols
-
Mitochondrial membrane-potential fluorescent assay
Mitochondrial membrane potential fluorescent assays estimate ΔΨm in living cells using lipophilic cationic dyes such as TMRM, TMRE, rhodamine 123, and JC-1, which accumulate in mitochondria according to membrane polarization; loss of signal after FCCP or CCCP treatment is interpreted as mitochondrial depolarization. TMRM/TMRE and rhodamine 123 are commonly used for semi-quantitative live-cell microscopy or flow cytometry, while JC-1 can report a shift from red aggregate fluorescence to green monomer fluorescence during depolarization; interpretation requires controls because dye concentration, quenching mode, cell type, dye efflux, and mitochondrial mass can affect fluorescence independently of ΔΨm.
-
Cell Cytotoxicity Assay
Cytotoxicity assays are usually based on the assessment of cell membrane damage, which can also be indirectly detected by measuring cell viability. Detection methods include MTT assay, CKK-8 assay, LDH assay and ATP assay, etc.
-
Mammalian live/dead viability and cytotoxicity staining
Live/dead viability and cytotoxicity staining assays are based on the simultaneous detection of intracellular esterase activity in metabolically active (viable) cells and membrane integrity loss in non-viable cells. In commonly used dual-staining approaches, membrane-permeant fluorogenic substrates are converted by intracellular esterases into fluorescent products in live cells, while impermeant DNA-binding dyes selectively enter cells with compromised plasma membranes and label nucleic acids in dead or dying cells, enabling discrimination between viable and non-viable populations by fluorescence microscopy or flow cytometry.
-
ROS/oxidative-stress fluorescent staining
ROS/oxidative-stress fluorescent staining uses cell-permeant fluorogenic probes that become fluorescent after oxidation inside cells or tissues; commonly used examples include DCFH-DA/DCFDA for broad cellular oxidant detection, DHE for superoxide-related signal detection, MitoSOX for mitochondrial superoxide-related signal detection, and CellROX probes for oxidative-stress-associated fluorescence readouts. The assay detects probe oxidation rather than a single ROS species unless the probe and analysis method have been chemically validated for that species. DCFH-DA enters cells, is deacetylated by intracellular esterases to DCFH, and produces fluorescent DCF after oxidation, so the readout is used as an operational measure of total cellular oxidative stress rather than a species-specific ROS measurement. DHE and MitoSOX can report superoxide-related oxidation, but red fluorescence alone can include non-specific ethidium-like oxidation products; HPLC or optimized spectral approaches are
-
Fluorescent plasma-membrane potential dye assay
Fluorescent plasma-membrane potential dye assays measure changes in cell membrane potential using voltage-sensitive dyes whose fluorescence changes when cells depolarize or hyperpolarize. Anionic bis-oxonol dyes such as DiBAC4(3) enter depolarized cells more readily and show increased fluorescence after intracellular binding, while hyperpolarization reduces dye accumulation and fluorescence. FMP/FLIPR membrane-potential dyes are used for faster, homogeneous microplate assays of ion-channel or receptor-mediated membrane-potential changes.
-
Mitochondrial membrane-potential and mitochondrial mass staining
Mitochondrial membrane potential staining measures the electrochemical polarization across the mitochondrial inner membrane in live cells using lipophilic cationic fluorescent probes; early rhodamine-based work showed that selective mitochondrial dye accumulation is lost when the mitochondrial transmembrane potential is dissipated. JC-1 reports mitochondrial polarization by shifting from green monomer fluorescence to red J-aggregate fluorescence as dye concentration increases within energized mitochondria; therefore, the red/green fluorescence ratio is used as a relative readout of mitochondrial membrane potential. TMRE or TMRM staining provides a single-channel relative readout because these cationic rhodamine esters accumulate in polarized mitochondria, and lower fluorescence indicates reduced mitochondrial polarization when acquisition and dye-loading conditions are controlled. Mitochondrial mass staining is commonly performed with MitoTracker Green FM or related MitoTracker dyes as
-
Apoptosis Solutions
Apoptosis is a regulated, generally non-lytic cell-death pathway that removes unwanted, damaged, infected, or abnormal cells through coordinated morphological changes, caspase activation, DNA fragmentation, and membrane remodeling. The intrinsic apoptosis pathway is controlled mainly by mitochondrial outer membrane permeabilization, BCL-2 family proteins, cytochrome c release, apoptosome formation, caspase-9 activation, and downstream executioner caspase-3/7 activation. The extrinsic apoptosis pathway is initiated by death receptors such as Fas, TNFR, and TRAIL receptors, which recruit adaptor proteins and activate caspase-8 before engaging executioner caspases or mitochondrial amplification through BID cleavage. Apoptosis is linked to many phenotypes, including cancer cell killing, tissue homeostasis, immune regulation, neurodegeneration, infection response, and treatment-induced cytotoxicity; unresolved questions include how apoptosis interacts with necroptosis, pyroptosis, ferroptos
-
Breast Cancer Modeling
Breast cancer is a heterogeneous cancer, and it has been distinguished into four subtypes: luminal A, luminal B, HER2-positive and basal-like. Molecular mutations, epigenetic alterations, hormone exposure and immune microenvironment are related to the progression of breast cancer.
-
Research Protocol for Cancer Immunology
Cancer immunology studies how the immune system recognizes, suppresses, edits, or fails to eliminate malignant cells through tumor antigen release, antigen presentation, T-cell priming, immune trafficking, tumor-cell killing, and feedback inhibition in the tumor microenvironment. The cancer-immunity cycle links tumor antigenicity, dendritic-cell priming, CD8+ T-cell infiltration, cytotoxic function, and immune-checkpoint regulation to tumor rejection or immune escape. Immune-checkpoint pathways such as PD-1/PD-L1 and CTLA-4 suppress antitumor T-cell activity and can be therapeutically blocked, but many tumors remain resistant because of poor antigen presentation, weak T-cell infiltration, suppressive myeloid cells, regulatory T cells, and tumor-intrinsic immune-exclusion programs. Unresolved questions include which immune-cell states predict response, how tumor-intrinsic pathways exclude immune cells, how myeloid suppression limits checkpoint blockade, and which combination strategies
Purity & Documentation
-
Data Sheet (280 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
References
[1]. Calvillo-Rodríguez KM, et al. PKHB1, a thrombospondin-1 peptide mimic, induces anti-tumor effect through immunogenic cell death induction in breast cancer cells. Oncoimmunology. 2022;11(1):2054305. Published 2022 Apr 4. [Content Brief]
[2]. He Y, et al. PKHB1 peptide induces antiviral effects through induction of immunogenic cell death in herpes simplex keratitis. Front Pharmacol. 2022;13:1048978. Published 2022 Dec 1. [Content Brief]
[3]. Uscanga-Palomeque AC, et al. CD47 agonist peptide PKHB1 induces immunogenic cell death in T-cell acute lymphoblastic leukemia cells. Cancer Sci. 2019;110(1):256-268. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 0.7222 mL | 3.6108 mL | 7.2216 mL | 18.0541 mL |
| 5 mM | 0.1444 mL | 0.7222 mL | 1.4443 mL | 3.6108 mL | |
| 10 mM | 0.0722 mL | 0.3611 mL | 0.7222 mL | 1.8054 mL | |
| 15 mM | 0.0481 mL | 0.2407 mL | 0.4814 mL | 1.2036 mL | |
| 20 mM | 0.0361 mL | 0.1805 mL | 0.3611 mL | 0.9027 mL | |
| 25 mM | 0.0289 mL | 0.1444 mL | 0.2889 mL | 0.7222 mL | |
| 30 mM | 0.0241 mL | 0.1204 mL | 0.2407 mL | 0.6018 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.