LIBX-A401
Based on 1 Customer Validation
LIBX-A401 is a selective long-chain acyl-CoA synthetase 4 (ACSL4) inhibitor with a human IC50 values of 0.38 μM and a Kd of 0.72 μM. LIBX-A401 binds to ACSL4 in an ATP-dependent manner, stabilizes the C-terminal domain, alters the fatty acid gate region, and interacts with residues A329 and Q302 within the fatty acid binding site. LIBX-A401 exhibits anti-ferroptosis properties in cells. LIBX-A401 can be used for the researches of cancer and parkinson's disease.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.9%
- CAS No.: 3111845-07-6
- 화학식: C20H21NO4
- 분자량:339.39
-
보관:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Anti-Cancer Compound Library
HY-L025
-
Ferroptosis Compound Library
HY-L051
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Anti-Parkinson's Disease Compound Library
HY-L085
-
Neurodegenerative Disease-related Compound Library
HY-L086
-
Lipid Metabolism Compound Library
HY-L091
-
Highly Selective Inhibitors Library
HY-L158
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
|
ACSL4 |
LIBX-A401 () (0.38 ± 0.03 μM; up to 50 μM; 10 μM) inhibits wild-type recombinant human ACSL4 with an IC50 of 0.38 ± 0.03 μM and a Kd of 0.72 ± 0.12 μM, while showing no activity against recombinant human ACSL3 (IC50 >50 μM) and no activity against PPARγ at 10 μM[1].
LIBX-A401 inhibits recombinant human ACSL4Q302M, ACSL4Q302A, and ACSL4L325F mutants with IC50 values of 7.1 ± 0.6 μM, 2.4 ± 0.4 μM, and 17.8 ± 3.8 μM, respectively, Kd values of 11.0 ± 1.6 μM, 8.6 ± 1.3 μM, and 43.5 ± 5.4 μM, respectively[1].
LIBX-A401 (5 μM) induces an ATP-dependent thermal shift of wild-type recombinant human ACSL4, increasing its thermal stability by a ΔTm of 5.3 ± 0.2 °C at a concentration of 5 μM[1].
LIBX-A401 (100 μM) specifically binds to the fatty acid gate domain-containing peptide 313DTYIGYLPLAHVLELTAEISCFTYGCR339 of recombinant wild-type human ACSL4 in an ATP-dependent manner, as shown by competitive reduction of photoaffinity probe labeling[1].
LIBX-A401 (2.5 μM; 24 h pre-incubation) protects HEK293 and HT-1080 cells from RSL3 (HY-100218A)-induced ferroptosis[1].
LIBX-A401 (2.5 μM; 4 h pre-incubation) protects LUHMES cells from Arachidonic acid (HY-109590) + Fe-induced ferroptosis and reduces lipid peroxidation[1].
LIBX-A401 (50 μM) does not exhibit DPPH scavenging activity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HEK293 and HT-1080 cell
-
Concentration:2.5 μM (pre-incubation)
-
Incubation Time:24 h (pre-incubation); 48 h (RSL3 treatment)
-
Result:Significantly prevented RSL3-induced cell death.
Maintained high cell viability relative to untreated controls exposed to RSL3.
-
Cell Line:LUHMES cells
-
Concentration:2.5 μM (pre-incubation)
-
Incubation Time:4 h (pre-incubation); 48 h (arachidonic acid + Fe treatment)
-
Result:Significantly prevented AA + Fe-induced cell death.
Maintained cell viability at levels comparable to ACSL4 siRNA-transfected cells, relative to untreated controls exposed to AA + Fe.
Chemical Information
-
CAS No. 3111845-07-6
-
Appearance Solid
-
분자량 339.39
-
화학식 C20H21NO4
-
Color White to off-white
-
SMILES
CN(CCOC1=CC=C(C=C1)/C=C/C(OC)=O)C(C2=CC=CC=C2)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
DMSO : 50 mg/mL (147.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9465 mL | 14.7323 mL | 29.4646 mL | 73.6616 mL |
| 5 mM | 0.5893 mL | 2.9465 mL | 5.8929 mL | 14.7323 mL | |
| 10 mM | 0.2946 mL | 1.4732 mL | 2.9465 mL | 7.3662 mL | |
| 15 mM | 0.1964 mL | 0.9822 mL | 1.9643 mL | 4.9108 mL | |
| 20 mM | 0.1473 mL | 0.7366 mL | 1.4732 mL | 3.6831 mL | |
| 25 mM | 0.1179 mL | 0.5893 mL | 1.1786 mL | 2.9465 mL | |
| 30 mM | 0.0982 mL | 0.4911 mL | 0.9822 mL | 2.4554 mL | |
| 40 mM | 0.0737 mL | 0.3683 mL | 0.7366 mL | 1.8415 mL | |
| 50 mM | 0.0589 mL | 0.2946 mL | 0.5893 mL | 1.4732 mL | |
| 60 mM | 0.0491 mL | 0.2455 mL | 0.4911 mL | 1.2277 mL | |
| 80 mM | 0.0368 mL | 0.1842 mL | 0.3683 mL | 0.9208 mL | |
| 100 mM | 0.0295 mL | 0.1473 mL | 0.2946 mL | 0.7366 mL |
LIBX-A401 Related Classifications
HY-173432 Related Classifications
Powered by Bioz