TP0472993
Based on 1 Customer Validation
CYP4A11/CYP4F2-IN-2 is a potent and orally active dual inhibitor of cytochrome P450 (CYP) 4A11 and CYP4F2, with IC50s of 140 nM and 40 nM, respectively. CYP4A11/CYP4F2-IN-2 has potential for the research of renal diseases.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.22%
- CAS No.: 2126874-77-7
- 화학식: C16H20N4O2
- 분자량:300.36
-
보관:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
|
CYP4A11 140 nM (IC50) |
CYP4F2 40 nM (IC50) |
CYP4A11/CYP4F2-IN-2 (compound 11c) inhibits 20-Hydroxyeicosatetraenoic acid (20-HETE) production from arachidonic acid in human renal microsomes, with an IC50 of 29 nM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
CYP4A11/CYP4F2-IN-2 (0.5 mg/kg; i.v.) exhibits low CL (1430 mL/h/kg), moderate Vdss(763 mL/kg), and short T1/2 (0.424 h) in mice[1].
CYP4A11/CYP4F2-IN-2 (1 mg/kg; i.v.) exhibits low CL (226 mL/h/kg), moderate Vdss(839 mL/kg), and T1/2 (3.01 h) in SD rats[1].
CYP4A11/CYP4F2-IN-2 (1 mg/kg; p.o.) exhibits Cmax (623 ng/mL), T1/2 (3.03 h), and high bioavailability (97.7%) in SD rats[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2126874-77-7
-
Appearance Solid
-
분자량 300.36
-
화학식 C16H20N4O2
-
Color White to off-white
-
SMILES
CC(N1CCC(CC1)COC2=CC=C(N=C2)C3=CC=NN3)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
DMSO : 25 mg/mL (83.23 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.32 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.32 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3293 mL | 16.6467 mL | 33.2934 mL | 83.2335 mL |
| 5 mM | 0.6659 mL | 3.3293 mL | 6.6587 mL | 16.6467 mL | |
| 10 mM | 0.3329 mL | 1.6647 mL | 3.3293 mL | 8.3233 mL | |
| 15 mM | 0.2220 mL | 1.1098 mL | 2.2196 mL | 5.5489 mL | |
| 20 mM | 0.1665 mL | 0.8323 mL | 1.6647 mL | 4.1617 mL | |
| 25 mM | 0.1332 mL | 0.6659 mL | 1.3317 mL | 3.3293 mL | |
| 30 mM | 0.1110 mL | 0.5549 mL | 1.1098 mL | 2.7744 mL | |
| 40 mM | 0.0832 mL | 0.4162 mL | 0.8323 mL | 2.0808 mL | |
| 50 mM | 0.0666 mL | 0.3329 mL | 0.6659 mL | 1.6647 mL | |
| 60 mM | 0.0555 mL | 0.2774 mL | 0.5549 mL | 1.3872 mL | |
| 80 mM | 0.0416 mL | 0.2081 mL | 0.4162 mL | 1.0404 mL |
TP0472993 Related Classifications
HY-151810 Related Classifications
Powered by Bioz