Proscillaridin A
Based on 1 publication(s) in Google Scholar
Proscillaridin A is a potent poison of topoisomerase I/II activity with IC50 values of 30 nM and 100 nM, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.0%
- CAS No.: 466-06-8
- Formule: C30H42O8
- Masse moléculaire:530.65
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Proscillaridin A
MoreVoir tous les produits spécifiques à Isoform Topoisomerase
More
Activité biologique
|
Topoisomerase I 30 nM (IC50) |
Topoisomerase II 100 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HCT-116 | IC50 |
0.06 μM
Compound: 5
|
Cytotoxicity against human HCT116 cells after 72 hrs by FMCA method
Cytotoxicity against human HCT116 cells after 72 hrs by FMCA method
|
[PMID: 19894733] |
| HT-29 | IC50 |
0.55 μM
Compound: 5
|
Cytotoxicity against human HT-29 cells after 72 hrs by FMCA method
Cytotoxicity against human HT-29 cells after 72 hrs by FMCA method
|
[PMID: 19894733] |
| Vero | CC50 |
>50 μM
Compound: Proscillaridin
|
Cell viability measured by CellTiter-Glo assay in Vero cells at MOI 0.05 after 72hr
Cell viability measured by CellTiter-Glo assay in Vero cells at MOI 0.05 after 72hr
|
10.1101/2020.03.20.999730 |
| Vero | IC50 |
2.04 μM
Compound: Proscillaridin
|
Antiviral activity against SARS-CoV-2 (viral titer) measured by plaque assay in Vero cells at MOI 0.0125 after 24 hr
Antiviral activity against SARS-CoV-2 (viral titer) measured by plaque assay in Vero cells at MOI 0.0125 after 24 hr
|
10.1101/2020.03.20.999730 |
Proscillaridin A (0-160 nM; 48 hours) reveals the antiproliferative response in a time- as well as dose-dependent manner in MCF-7 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 466-06-8
-
Appearance Solid
-
Masse moléculaire 530.65
-
Formule C30H42O8
-
Color White to off-white
-
SMILES
O[C@@]([C@@]1(CC2)C)(CC[C@@H]1C(C=C3)=COC3=O)[C@@](CCC4=C[C@@H](O[C@@](O[C@@H](C)[C@H](O)[C@H]5O)([H])[C@@H]5O)CC6)([H])[C@@]2([H])[C@]46C
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Autophagy
2025 May;21(5):934-956. PMID: 39663580
Solvant et solubilité
DMSO : 100 mg/mL (188.45 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (479 KB)
- English - EN (479 KB)
- Français - FR (479 KB)
- Deutsch - DE (479 KB)
- Norwegian - NO (479 KB)
- Español - ES (479 KB)
- Swedish - SV (479 KB)
- Italian - IT (479 KB)
- Korean - KR (479 KB)
- Portuguese - PT (479 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8845 mL | 9.4224 mL | 18.8448 mL | 47.1120 mL |
| 5 mM | 0.3769 mL | 1.8845 mL | 3.7690 mL | 9.4224 mL | |
| 10 mM | 0.1884 mL | 0.9422 mL | 1.8845 mL | 4.7112 mL | |
| 15 mM | 0.1256 mL | 0.6282 mL | 1.2563 mL | 3.1408 mL | |
| 20 mM | 0.0942 mL | 0.4711 mL | 0.9422 mL | 2.3556 mL | |
| 25 mM | 0.0754 mL | 0.3769 mL | 0.7538 mL | 1.8845 mL | |
| 30 mM | 0.0628 mL | 0.3141 mL | 0.6282 mL | 1.5704 mL | |
| 40 mM | 0.0471 mL | 0.2356 mL | 0.4711 mL | 1.1778 mL | |
| 50 mM | 0.0377 mL | 0.1884 mL | 0.3769 mL | 0.9422 mL | |
| 60 mM | 0.0314 mL | 0.1570 mL | 0.3141 mL | 0.7852 mL | |
| 80 mM | 0.0236 mL | 0.1178 mL | 0.2356 mL | 0.5889 mL | |
| 100 mM | 0.0188 mL | 0.0942 mL | 0.1884 mL | 0.4711 mL |