(S)-JQ-35
Based on 1 Customer Validation
(S)-JQ-35 (TEN-010) is an orally active, blood-brain barrier-permeable bromodomain inhibitor that selectively targets the bromodomain and extra-terminal domain (BET) protein family (BRD4, BRD3, BRD2 and BRDT). (S)-JQ-35 blocks the activation of Myc gene expression by BRD4, thereby inhibiting cancer cell proliferation and promoting cancer cell apoptosis. (S)-JQ-35 can be used in research related to NUT midline carcinoma and neuroblastoma.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.46%
- CAS No.: 1349719-98-7
- Formule: C27H34ClN7OS
- Masse moléculaire:540.12
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-15743
BirabresibBRD2/3/4 Inhibitor -
HY-100015
MivebresibBET Inhibitor -
HY-13235
I-BET151BRD2/3/4 Inhibitor -
HY-13032
MolibresibBET Inhibitor -
HY-16652
ApabetaloneBET Inhibitor -
HY-112090
ABBV-744BD2 Inhibitor -
HY-101567
BMS-986158BET Inhibitor -
HY-100653A
AZD5153 6-Hydroxy-2-naphthoic acidBET/BRD4 Inhibitor -
HY-15846
CPI-203BET Bromodomain Inhibitor -
HY-107424
BAY-299BRPF2 Bromodomain Inhibitor -
HY-112504
INCB054329 -
HY-13959
MS436Bromodomain Inhibitor
Activité biologique
Description
IC50 & Target
[1]|
BRD2 |
BRD4 |
BRD3 |
BRDT |
BET |
In Vitro
(S)-JQ-35 (72 h) inhibits the viability of 15 neuroblastoma cell lines, with IC50 values ranging from 85 nM to 4.8 μM[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:15 neuroblastoma cell lines
-
Concentration:/
-
Incubation Time:72 h
-
Result:Reduced viability by more than 75% in six highly sensitive neuroblastoma cell lines at 1 μM.
Exhibited IC50 values spanning 85 nM to 632 nM for seven highly sensitive neuroblastoma cell lines.
Showed IC50 values ranging from 1.5 μM to 4.8 μM for five intermediately responsive neuroblastoma cell lines.
Demonstrated strongest activity in cell lines with high MYCN/MYC activity, and weaker activity in MYCN-non-amplified and low c-myc expressing cell lines.
- RT-PCR
- RNA extraction experimental
- Annexin V plus membrane-impermeant dye apoptosis staining
- BrdU Incorporation Assay
- Somatic Cell Culture
- CFSE Dye Dilution Proliferation Assay
- Dye-dilution cell tracking and proliferation staining
- CCK-8/WST-8 Cell Proliferation Assay
- Protocol for Cell Cycle
- Cell Counting-Based Growth Curve Assay
- Colony Formation (Clonogenic) Assay
- Real Time qPCR (Q-PCR)
- Cell Viability Determination by MTT Colorimetric Assay
- EdU Incorporation Assay (Click Chemistry-Based DNA Synthesis Measurement)
- Ki-67 Immunostaining Proliferation Assay
- Detection of Apoptosis
- TUNEL staining for apoptotic DNA fragmentation
- PCNA Immunodetection Proliferation Assay
- Protocol for Cell Counting and Cell Density Analysis
- Apoptosis Solutions
- MTT Cell Proliferation Assay
Chemical Information
-
CAS No. 1349719-98-7
-
Appearance Solid
-
Masse moléculaire 540.12
-
Formule C27H34ClN7OS
-
Color Light yellow to pink
-
SMILES
O=C(NCCCN1CCN(C)CC1)C[C@H]2C3=NN=C(C)N3C4=C(C(C)=C(C)S4)C(C5=CC=C(Cl)C=C5)=N2
-
Synonyms
TEN-010
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
In Vitro:
DMSO : ≥ 85 mg/mL (157.37 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.63 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (306 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8514 mL | 9.2572 mL | 18.5144 mL | 46.2860 mL |
| 5 mM | 0.3703 mL | 1.8514 mL | 3.7029 mL | 9.2572 mL | |
| 10 mM | 0.1851 mL | 0.9257 mL | 1.8514 mL | 4.6286 mL | |
| 15 mM | 0.1234 mL | 0.6171 mL | 1.2343 mL | 3.0857 mL | |
| 20 mM | 0.0926 mL | 0.4629 mL | 0.9257 mL | 2.3143 mL | |
| 25 mM | 0.0741 mL | 0.3703 mL | 0.7406 mL | 1.8514 mL | |
| 30 mM | 0.0617 mL | 0.3086 mL | 0.6171 mL | 1.5429 mL | |
| 40 mM | 0.0463 mL | 0.2314 mL | 0.4629 mL | 1.1572 mL | |
| 50 mM | 0.0370 mL | 0.1851 mL | 0.3703 mL | 0.9257 mL | |
| 60 mM | 0.0309 mL | 0.1543 mL | 0.3086 mL | 0.7714 mL | |
| 80 mM | 0.0231 mL | 0.1157 mL | 0.2314 mL | 0.5786 mL | |
| 100 mM | 0.0185 mL | 0.0926 mL | 0.1851 mL | 0.4629 mL |
(S)-JQ-35 Related Classifications
HY-117286 Related Classifications
Powered by Bioz