Methyl vanillate
Based on 2 publication(s) in Google Scholar
Methyl vanillate, one of the ingredients in Oryza sativa Linn., is a Wnt/β-catenin pathway activator. A benzoate ester that is the methyl ester of vanillic acid. It has a role as an antioxidant and a plant metabolite.
For research use only. We do not sell to patients.
- Purity: 99.88%
- CAS No.: 3943-74-6
- Formula: C9H10O4
- Molecular Weight:182.17
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications Citing Use of MedChemExpress (MCE) Methyl vanillate
MoreAll Endogenous Metabolite Isoforms
More
Biological Activity
|
Human Endogenous Metabolite |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A549 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human A549 cells after 24 hrs by MTT assay
Anticancer activity against human A549 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| B16-F10 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against mouse B16F10 cells after 24 hrs by MTT assay
Anticancer activity against mouse B16F10 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| Hs 683 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human Hs683 cells after 24 hrs by MTT assay
Anticancer activity against human Hs683 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| LoVo | IC50 |
83 μM
Compound: 1bMe
|
Anticancer activity against human LoVo cells after 24 hrs by MTT assay
Anticancer activity against human LoVo cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| MCF7 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human MCF7 cells after 24 hrs by MTT assay
Anticancer activity against human MCF7 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| OE33 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human OE33 cells after 24 hrs by MTT assay
Anticancer activity against human OE33 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| PC-3 | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human PC3 cells after 24 hrs by MTT assay
Anticancer activity against human PC3 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| RBL-2H3 | IC50 |
640 μM
Compound: 1
|
Anti-allergic activity in RBL2H3 cells assessed as inhibition of anti-DNP-IgE-induced degranulation incubated for 20 mins followed by DNP-labeled human serum albumin addition measured after 1 hr by beta-hexosaminidase release assay
Anti-allergic activity in RBL2H3 cells assessed as inhibition of anti-DNP-IgE-induced degranulation incubated for 20 mins followed by DNP-labeled human serum albumin addition measured after 1 hr by beta-hexosaminidase release assay
|
[PMID: 27324979] |
| T98G | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human T98G cells after 24 hrs by MTT assay
Anticancer activity against human T98G cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
| U-373MG ATCC | IC50 |
>100 μM
Compound: 1bMe
|
Anticancer activity against human U373 cells after 24 hrs by MTT assay
Anticancer activity against human U373 cells after 24 hrs by MTT assay
|
[PMID: 20466556] |
Methyl vanillate (0-100 μM) increases the expression and nuclear translocation of β-catenin in calvarial osteoblasts. Methyl vanillate dose-dependently elevates ALP activity in calvarial osteoblasts[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 3943-74-6
-
Appearance Solid
-
Molecular Weight 182.17
-
Formula C9H10O4
-
Color Off-white to light brown
-
SMILES
O=C(OC)C(C=C1)=CC(OC)=C1O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cell Death Dis
The anthelmintic drug niclosamide induces GSK-β-mediated β-catenin degradation to potentiate gemcitabine activity, reduce immune evasion ability and suppress pancreatic cancer progression. [Abstract]2022 Feb 3;13(2):112. PMID: 35115509 -
Med Oncol
FAT4 activation inhibits epithelial-mesenchymal transition (EMT) by promoting autophagy in H2228/Cer cells. [Abstract]2022 Dec 28;40(1):64. PMID: 36576661
Solvent & Solubility
DMSO : ≥ 100 mg/mL (548.94 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 1.67 mg/mL (9.17 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (13.72 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (13.72 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 2 mg/mL (10.98 mM); Clear solution; Need ultrasonic and warming and heat to 60°C
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 5.4894 mL | 27.4469 mL | 54.8938 mL | 137.2345 mL |
| 5 mM | 1.0979 mL | 5.4894 mL | 10.9788 mL | 27.4469 mL | |
| DMSO | 10 mM | 0.5489 mL | 2.7447 mL | 5.4894 mL | 13.7234 mL |
| 15 mM | 0.3660 mL | 1.8298 mL | 3.6596 mL | 9.1490 mL | |
| 20 mM | 0.2745 mL | 1.3723 mL | 2.7447 mL | 6.8617 mL | |
| 25 mM | 0.2196 mL | 1.0979 mL | 2.1958 mL | 5.4894 mL | |
| 30 mM | 0.1830 mL | 0.9149 mL | 1.8298 mL | 4.5745 mL | |
| 40 mM | 0.1372 mL | 0.6862 mL | 1.3723 mL | 3.4309 mL | |
| 50 mM | 0.1098 mL | 0.5489 mL | 1.0979 mL | 2.7447 mL | |
| 60 mM | 0.0915 mL | 0.4574 mL | 0.9149 mL | 2.2872 mL | |
| 80 mM | 0.0686 mL | 0.3431 mL | 0.6862 mL | 1.7154 mL | |
| 100 mM | 0.0549 mL | 0.2745 mL | 0.5489 mL | 1.3723 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.