Oxyclozanide
Based on 4 publication(s) in Google Scholar
Oxyclozanide is an orally active salicylanilide anthelmintic agent that mainly acts by uncoupling oxidative phosphorylation in flukes. Oxyclozanide shows good anti-adenovirus, anti-biofilm, antifungal, and antibacterial activity.
For research use only. We do not sell to patients.
- Purity: 98.73%
- CAS No.: 2277-92-1
- Formula: C13H6Cl5NO3
- Molecular Weight:401.46
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) Oxyclozanide
MoreAll Parasite Isoforms
More
Biological Activity
|
Schistosome |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| J774.A1 | CC50 |
42.4 μM
Compound: 34
|
Cytotoxicity against mouse J774A.1 cells assessed as reduction in cell viability by MTT assay
Cytotoxicity against mouse J774A.1 cells assessed as reduction in cell viability by MTT assay
|
[PMID: 36565533] |
| Vero | CC50 |
>50 μM
Compound: Oxyclozanide
|
Cell viability measured by CellTiter-Glo assay in Vero cells at MOI 0.05 after 72hr
Cell viability measured by CellTiter-Glo assay in Vero cells at MOI 0.05 after 72hr
|
10.1101/2020.03.20.999730 |
| Vero | CC50 |
155.84 μM
Compound: 34
|
Cytotoxicity against African green monkey Vero cells assessed as reduction in cell viability by MTT assay
Cytotoxicity against African green monkey Vero cells assessed as reduction in cell viability by MTT assay
|
[PMID: 36565533] |
| Vero | IC50 |
3.71 μM
Compound: Oxyclozanide
|
Antiviral activity against SARS-CoV-2 (viral titer) measured by plaque assay in Vero cells at MOI 0.0125 after 24 hr
Antiviral activity against SARS-CoV-2 (viral titer) measured by plaque assay in Vero cells at MOI 0.0125 after 24 hr
|
10.1101/2020.03.20.999730 |
Oxyclozanide inhibits meticillin-sensitive S. pseudintermedius isolates with MIC values of 0.5-1 μg/mL[3]. Oxyclozanide inhibits meticillin-resistant S. pseudintermedius isolates with MIC values of 0.5-2 μg/mL[3]. Oxyclozanide inhibits methicillin-resistant S. aureus (MRSA) with a MIC value of 1 μg/mL[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Healthy male and female Wistar rats (100-150 g)[2]
-
Dosage:5000, 3690, 2730, 2025 and 1500 mg/kg
-
Administration:Oral administration; 5000, 3690, 2730, 2025 and 1500 mg/kg; once
-
Result:Induced toxic symptoms of pression, rough hair, inappetence and cyanotic lips, limbs and tail. Induced swelling spleen, bleeding spots in the liver and swelling stomachs at high-dose group.
Chemical Information
-
CAS No. 2277-92-1
-
Appearance Solid
-
Molecular Weight 401.46
-
Formula C13H6Cl5NO3
-
Color White to off-white
-
SMILES
O=C(NC1=CC(Cl)=CC(Cl)=C1O)C2=C(O)C(Cl)=CC(Cl)=C2Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Anal Chem
Exposome-Scale Investigation of Cl-/Br-Containing Chemicals Using High-Resolution Mass Spectrometry, Multistage Machine Learning, and Cloud Computing. [Abstract]2025 Jun 3;97(21):11099-11109. PMID: 40401576 -
-
-
Solvent & Solubility
DMSO : 100 mg/mL (249.09 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (278 KB)
-
SDS (623 KB)
- English - EN (623 KB)
- Français - FR (623 KB)
- Deutsch - DE (623 KB)
- Norwegian - NO (623 KB)
- Español - ES (623 KB)
- Swedish - SV (623 KB)
- Italian - IT (623 KB)
- Korean - KR (623 KB)
- Portuguese - PT (623 KB)
-
Handling Instructions (2659 KB)
References
[1]. Georgiev B, Gruev A. Efektivnost na levamizole i oxyclozanide sreshtu paramfistomatozata po ovtsete i govedata [Effectiveness of levamisole and oxyclozanide in paramphistomiasis in sheep and cattle]. Vet Med Nauki. 1979;16(3):45-51. [Content Brief]
[2]. Wang W, et al. Acute and Subacute Toxicity Assessment of Oxyclozanide in Wistar Rats. Front Vet Sci. 2019 Sep 6;6:294. [Content Brief]
[3]. Levinson MR, et al. The in vitro antibacterial activity of the anthelmintic drug oxyclozanide against common small animal bacterial pathogens. Vet Dermatol. 2019 Aug;30(4):314-e87. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4909 mL | 12.4545 mL | 24.9091 mL | 62.2727 mL |
| 5 mM | 0.4982 mL | 2.4909 mL | 4.9818 mL | 12.4545 mL | |
| 10 mM | 0.2491 mL | 1.2455 mL | 2.4909 mL | 6.2273 mL | |
| 15 mM | 0.1661 mL | 0.8303 mL | 1.6606 mL | 4.1515 mL | |
| 20 mM | 0.1245 mL | 0.6227 mL | 1.2455 mL | 3.1136 mL | |
| 25 mM | 0.0996 mL | 0.4982 mL | 0.9964 mL | 2.4909 mL | |
| 30 mM | 0.0830 mL | 0.4152 mL | 0.8303 mL | 2.0758 mL | |
| 40 mM | 0.0623 mL | 0.3114 mL | 0.6227 mL | 1.5568 mL | |
| 50 mM | 0.0498 mL | 0.2491 mL | 0.4982 mL | 1.2455 mL | |
| 60 mM | 0.0415 mL | 0.2076 mL | 0.4152 mL | 1.0379 mL | |
| 80 mM | 0.0311 mL | 0.1557 mL | 0.3114 mL | 0.7784 mL | |
| 100 mM | 0.0249 mL | 0.1245 mL | 0.2491 mL | 0.6227 mL |