BMS-819881
Based on 1 Customer Validation
BMS-819881 is a melaninconcentrating hormone receptor 1 (MCHR1) antagonist, which binds rat MCHR1 with a Ki of 7 nM. BMS-819881 also is selective and potent for CYP3A4 activity with an EC50 of 13 μM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.78%
- CAS No.: 1197420-05-5
- Formule: C24H21ClN2O4S
- Masse moléculaire:468.95
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Protocole
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
rat MCHR1 7 nM (Ki) |
CYP3A4 13 μM (EC50) |
BMS-819881 (Compound 27) is 99.8% binds to rat serum proteins and rat MCHR1 Ki is 7 nM. FLIPR-based assays establish that BMS-819881 is a potent and highly selective MCHR1 functional antagonist. BMS-819881 (Kb=32 nM) effectively blocks MCH stimulated Ca2+ mobilization in heterologous cells overexpressing MCHR1 but fails to inhibit MCH mediated Ca2+ mobilization of cells expressing MCHR2 at 10 μM. No activity is observed upon screening BMS-819881 at 10 μM versus a panel of 20 GPCRs associated with feeding homeostasis. The percent of BMS-819881 binds to serum proteins is species dependent ranging from 99.8%, 99.6%, and 99.3%, respectively, for rat, dog, and monkey. When BMS-819881 is screened for cytochrome P450 (CYP) activity, EC50 values for CYP1A2, CYP2C9, CYP2C19, CYP2D6 are >40 μM; however, the CYP3A4 EC50 is 13 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1197420-05-5
-
Appearance Solid
-
Masse moléculaire 468.95
-
Formule C24H21ClN2O4S
-
Color White to off-white
-
SMILES
ClC1=CC=C(C2=CC(N=CN(C3=CC(OC)=C(OC[C@H](O)C4CC4)C=C3)C5=O)=C5S2)C=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (213.24 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocole
Membranes from stably transfected HEK-293 cells expressing a mutated (E4Q, A5T) hMCHR1 receptor are prepared and differential centrifugation. Binding experiments are carried out with 0.5-1.0 μg of membrane protein incubated in a total of 0.2 mL in 25 mM HEPES (pH 7.4) with 10 mM MgCl2, 2 mM EGTA, and 0.1% BSA (binding buffer) for 90 min. For competition binding assays, reactions are carried out in the presence of 0.06–0.1 nM [Phe13, [125I]Tyr19]MCH and increasing concentrations of unlabeled test molecules. Reactions are terminated by rapid vacuum filtration over 96-well GFC Unifilter plates precoated with 0.075 mL of binding buffer containing 1% BSA and washed 3 times with 0.4 mL of PBS (pH 7.4) containing 0.01% TX-100. Filters are dried, 0.05 mL of MicroScint 20 is added to each well, and radioactivity is subsequently quantified by scintillation counting on a TopCount microplate scintillation counter. Inhibitory constants are determined by nonlinear least-squares analysis using a four-parameter logistic equation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Stable HEK-293 cells expressing human MCHR1 or MCHR2 receptor are plated at a density of 50 000 cells/well in 96-well polylysine coated plates and cultured overnight in DMEM (high glucose (4.5 g/mL), 25 mM HEPES, pH 7.4, 10% fetal bovine serum, 1 mM NaCl) at 37°C, 5% CO2 conditions. For assay, the medium is replaced with 90 mL per well dye solution consisting of 3.8 mM Fluo4 AM, 0.04% Pluronic F-127, and 2.5 mM Probencid in base buffer (Hank’s balanced salt solution, 25 mM HEPES, 0.1% BSA). Dye solution is allowed to “load” for 1 h at room temperature in subdued light. Dye is subsequently removed and replaced with 75 mL of base buffer and 75 mL of diluted test compound (e.g., BMS-819881; 10 μM) and incubated for an additional 15 min. Test compound dilution plates are prepared by serial diluting test and reference compounds from 100% DMSO stocks first 1:50 in base buffer and then serially (1:3.26) in base buffer containing 2% DMSO to generate 12 half log test concentrations[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1324 mL | 10.6621 mL | 21.3242 mL | 53.3106 mL |
| 5 mM | 0.4265 mL | 2.1324 mL | 4.2648 mL | 10.6621 mL | |
| 10 mM | 0.2132 mL | 1.0662 mL | 2.1324 mL | 5.3311 mL | |
| 15 mM | 0.1422 mL | 0.7108 mL | 1.4216 mL | 3.5540 mL | |
| 20 mM | 0.1066 mL | 0.5331 mL | 1.0662 mL | 2.6655 mL | |
| 25 mM | 0.0853 mL | 0.4265 mL | 0.8530 mL | 2.1324 mL | |
| 30 mM | 0.0711 mL | 0.3554 mL | 0.7108 mL | 1.7770 mL | |
| 40 mM | 0.0533 mL | 0.2666 mL | 0.5331 mL | 1.3328 mL | |
| 50 mM | 0.0426 mL | 0.2132 mL | 0.4265 mL | 1.0662 mL | |
| 60 mM | 0.0355 mL | 0.1777 mL | 0.3554 mL | 0.8885 mL | |
| 80 mM | 0.0267 mL | 0.1333 mL | 0.2666 mL | 0.6664 mL | |
| 100 mM | 0.0213 mL | 0.1066 mL | 0.2132 mL | 0.5331 mL |
BMS-819881 Related Classifications
HY-12433 Related Classifications
Powered by Bioz