USP1-IN-3
Based on 1 Customer Validation
USP1-IN-3 is a selective USPI inhibitor. USP1-IN-3 inhibits USPI-UAFI with an IC50 value of ＜30 nM. USP1-IN-3 can be used for the research of cancer.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.30%
- CAS No.: 2821749-58-8
- Formule: C27H24F3N7O
- Masse moléculaire:519.52
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
IC50: ＜30 nM (USPI-UAFI)[1]
USP1-IN-3 has inhibitory against USPI-UAFI with an IC50 value of ＜30 nM[1].
USP1-IN-3 has viability for a non-isogenic pair of BRCAI mutant and BRCAI WT cell lines with IC50 values of ＜100 nM and ＞ 10 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2821749-58-8
-
Appearance Solid
-
Masse moléculaire 519.52
-
Formule C27H24F3N7O
-
Color White to off-white
-
SMILES
COC1=C(C2=NC3=C(N(C)C=C3CC4=CC=C(C5=NC(C(F)(F)F)=CN5C)C=C4)C=N2)C(C6CC6)=NC=N1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 100 mg/mL (192.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.81 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9249 mL | 9.6243 mL | 19.2485 mL | 48.1213 mL |
| 5 mM | 0.3850 mL | 1.9249 mL | 3.8497 mL | 9.6243 mL | |
| 10 mM | 0.1925 mL | 0.9624 mL | 1.9249 mL | 4.8121 mL | |
| 15 mM | 0.1283 mL | 0.6416 mL | 1.2832 mL | 3.2081 mL | |
| 20 mM | 0.0962 mL | 0.4812 mL | 0.9624 mL | 2.4061 mL | |
| 25 mM | 0.0770 mL | 0.3850 mL | 0.7699 mL | 1.9249 mL | |
| 30 mM | 0.0642 mL | 0.3208 mL | 0.6416 mL | 1.6040 mL | |
| 40 mM | 0.0481 mL | 0.2406 mL | 0.4812 mL | 1.2030 mL | |
| 50 mM | 0.0385 mL | 0.1925 mL | 0.3850 mL | 0.9624 mL | |
| 60 mM | 0.0321 mL | 0.1604 mL | 0.3208 mL | 0.8020 mL | |
| 80 mM | 0.0241 mL | 0.1203 mL | 0.2406 mL | 0.6015 mL | |
| 100 mM | 0.0192 mL | 0.0962 mL | 0.1925 mL | 0.4812 mL |
USP1-IN-3 Related Classifications
HY-148184 Related Classifications
Powered by Bioz