ML254
Based on 1 Customer Validation
ML254 is a potent mGlu5 potentiator, with EC50 and pEC50 of 9.3 nM and 8.03 nM for rat mGlu5, respectively. ML254 can be used for researching schizophrenia. ML254 is a click chemistry reagent, it contains an Alkyne group and can undergo copper-catalyzed azide-alkyne cycloaddition (CuAAc) with molecules containing Azide groups.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 97.05%
- CAS. Nr.: 1428630-86-7
- Formel: C18H15FN2O2
- Molecular Weight:310.32
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
GPCR/G Protein Compound Library
HY-L006
-
Neuronal Signaling Compound Library
HY-L013
-
Neurotransmitter Receptor Compound Library
HY-L062
-
Heterocyclic Compound Library
HY-L138
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
-
Alkyne Compound Library
HY-L258
Biologische Aktivität
|
rat mGluR5 9.3 nM (EC50) |
rat mGluR5 8.03 nM (pEC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK293 | EC50 |
9.3 nM
Compound: 38t, VU0430644, ML254
|
Positive allosteric modulation of rat mGluR5 stably expressed in HEK293 cells assessed as increase in intracellular calcium level by Fluo-4AM dye-based fluorescence assay
Positive allosteric modulation of rat mGluR5 stably expressed in HEK293 cells assessed as increase in intracellular calcium level by Fluo-4AM dye-based fluorescence assay
|
[PMID: 24050755] |
Chemical Information
-
CAS. Nr. 1428630-86-7
-
Appearance Solid
-
Molecular Weight 310.32
-
Formel C18H15FN2O2
-
Color Off-white to light yellow
-
SMILES
O=C(NC1(C)COC1)C2=NC=C(C#CC3=CC=CC(F)=C3)C=C2
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (322.25 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Turlington M, Noetzel MJ, Chun A, et al. Exploration of allosteric agonism structure-activity relationships within an acetylene series of metabotropic glutamate receptor 5 (mGlu5) positive allosteric modulators (PAMs): discovery of 5-((3-fluorophenyl)ethynyl)-N-(3-methyloxetan-3-yl)picolinamide (ML254). J Med Chem. 2013;56(20):7976-7996. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.2225 mL | 16.1124 mL | 32.2248 mL | 80.5620 mL |
| 5 mM | 0.6445 mL | 3.2225 mL | 6.4450 mL | 16.1124 mL | |
| 10 mM | 0.3222 mL | 1.6112 mL | 3.2225 mL | 8.0562 mL | |
| 15 mM | 0.2148 mL | 1.0742 mL | 2.1483 mL | 5.3708 mL | |
| 20 mM | 0.1611 mL | 0.8056 mL | 1.6112 mL | 4.0281 mL | |
| 25 mM | 0.1289 mL | 0.6445 mL | 1.2890 mL | 3.2225 mL | |
| 30 mM | 0.1074 mL | 0.5371 mL | 1.0742 mL | 2.6854 mL | |
| 40 mM | 0.0806 mL | 0.4028 mL | 0.8056 mL | 2.0140 mL | |
| 50 mM | 0.0644 mL | 0.3222 mL | 0.6445 mL | 1.6112 mL | |
| 60 mM | 0.0537 mL | 0.2685 mL | 0.5371 mL | 1.3427 mL | |
| 80 mM | 0.0403 mL | 0.2014 mL | 0.4028 mL | 1.0070 mL | |
| 100 mM | 0.0322 mL | 0.1611 mL | 0.3222 mL | 0.8056 mL |
ML254 Related Classifications
HY-16654 Related Classifications
Powered by Bioz