MD-3-A45
Based on 1 Customer Validation
MD-3-A45 is an inhibitor of fibroblast growth factor 23 (FGF-23). MD-3-A45 blocks the activation of the FGFRs/α-klotho signaling pathway by FGF-23 and inhibits FGF-23-induced ERK activation. MD-3-A45 can be used in the research of chronic kidney disease, hereditary hypophosphatemic rickets and acquired hypophosphatemic rickets.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.23%
- CAS No.: 2314337-87-4
- Formule: C16H15NO
- Masse moléculaire:237.30
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Kinase Inhibitor Library
HY-L009
-
MAPK Compound Library
HY-L010
-
Protein Tyrosine Kinase Compound Library
HY-L016
-
Stem Cell Signaling Compound Library
HY-L017
-
Anti-Aging Compound Library
HY-L034
-
Reprogramming Compound Library
HY-L039
-
Oxygen Sensing Compound Library
HY-L045
-
Glutamine Metabolism Compound Library
HY-L064
-
Anti-Lung Cancer Compound Library
HY-L075
-
Anti-Obesity Compound Library
HY-L087
-
Angiogenesis-Related Compound Library
HY-L088
-
Anti-Liver Cancer Compound Library
HY-L101
-
Anti-Colorectal Cancer Compound Library
HY-L103
-
Anti-Prostate Cancer Compound Library
HY-L124
-
Cancer Stem Cells Compound Library
HY-L135
-
Pain-Related Compound Library
HY-L139
-
Membrane Protein-targeted Compound Library
HY-L149
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Cytokine Inhibitors Library
HY-L161
-
Serine/Threonine Kinase Inhibitor Library
HY-L164
-
Multi-Target Compound Library
HY-L176
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Anti-Fibrosis Compound Library
HY-L185
-
Anti-Brain Cancer Compound Library
HY-L188
-
Protein Kinase Compound Library
HY-L196
-
Cell Proliferation Compound Library
HY-L201
-
High-Throughput Bioactive Compound Library
HY-L205
-
Lactylation Compound Library
HY-L249
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HEK-293T | EC50 |
6.9 10^2 μM
Compound: 13a
|
Cytotoxicity against HEK293T cells assessed as effect on LDH release measured after 5 hrs by CytoTox96 Non-Radioactive assay
Cytotoxicity against HEK293T cells assessed as effect on LDH release measured after 5 hrs by CytoTox96 Non-Radioactive assay
|
[PMID: 33232874] |
Chemical Information
-
CAS No. 2314337-87-4
-
Appearance Solid
-
Masse moléculaire 237.30
-
Formule C16H15NO
-
Color Off-white to light brown
-
SMILES
O/N=C/C1=C(/C=C/C2=CC=C(C)C=C2)C=CC=C1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 50 mg/mL (210.70 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (5.27 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.2141 mL | 21.0704 mL | 42.1407 mL | 105.3519 mL |
| 5 mM | 0.8428 mL | 4.2141 mL | 8.4281 mL | 21.0704 mL | |
| 10 mM | 0.4214 mL | 2.1070 mL | 4.2141 mL | 10.5352 mL | |
| 15 mM | 0.2809 mL | 1.4047 mL | 2.8094 mL | 7.0235 mL | |
| 20 mM | 0.2107 mL | 1.0535 mL | 2.1070 mL | 5.2676 mL | |
| 25 mM | 0.1686 mL | 0.8428 mL | 1.6856 mL | 4.2141 mL | |
| 30 mM | 0.1405 mL | 0.7023 mL | 1.4047 mL | 3.5117 mL | |
| 40 mM | 0.1054 mL | 0.5268 mL | 1.0535 mL | 2.6338 mL | |
| 50 mM | 0.0843 mL | 0.4214 mL | 0.8428 mL | 2.1070 mL | |
| 60 mM | 0.0702 mL | 0.3512 mL | 0.7023 mL | 1.7559 mL | |
| 80 mM | 0.0527 mL | 0.2634 mL | 0.5268 mL | 1.3169 mL | |
| 100 mM | 0.0421 mL | 0.2107 mL | 0.4214 mL | 1.0535 mL |
MD-3-A45 Related Classifications
HY-186173 Related Classifications
Powered by Bioz