Dibenzyl trisulfide
Based on 1 Customer Validation
Dibenzyl trisulfide (DTS) is an active ingredient that can be isolated from Petiveria alliacea L.. Dibenzyl trisulfide inhibits cell proliferation and migration. Dibenzyl trisulfide decreased the mRNA and protein expression of BAK-1 and LTA. Dibenzyl trisulfide induces lysosomal membrane permeabilization and cathepsin B release.
For research use only. We do not sell to patients.
- Purity: 98.24%
- CAS No.: 6493-73-8
- Formula: C14H14S3
- Molecular Weight:278.46
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
All Cathepsin Isoforms
More
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A2780 | IC50 |
0.4 μM
Compound: 4
|
Antitumor activity against human A2780 cell line by RTCES assay
Antitumor activity against human A2780 cell line by RTCES assay
|
[PMID: 16828553] |
| HeLa | IC50 |
2.5 μM
Compound: 4
|
Antitumor activity against human HeLa cell line by RTCES assay
Antitumor activity against human HeLa cell line by RTCES assay
|
[PMID: 16828553] |
| HepG2 | IC50 |
>100 μM
Compound: 4
|
Antitumor activity against human HepG2 cell line by RTCES assay
Antitumor activity against human HepG2 cell line by RTCES assay
|
[PMID: 16828553] |
| HT-1080 | IC50 |
1.9 μM
Compound: 4
|
Antitumor activity against human HT1080 cell line by RTCES assay
Antitumor activity against human HT1080 cell line by RTCES assay
|
[PMID: 16828553] |
| Jurkat | IC50 |
0.35 μM
Compound: 4
|
Antitumor activity against human jurkat cell line by MTT assay
Antitumor activity against human jurkat cell line by MTT assay
|
[PMID: 16828553] |
| MCF7 | IC50 |
6.6 μM
Compound: 4
|
Antitumor activity against human MCF7 cell line by RTCES assay
Antitumor activity against human MCF7 cell line by RTCES assay
|
[PMID: 16828553] |
| MDA-MB-231 | IC50 |
2.4 μM
Compound: 4
|
Antitumor activity against human M231 cell line by RTCES assay
Antitumor activity against human M231 cell line by RTCES assay
|
[PMID: 16828553] |
| NCI-H460 | IC50 |
5.1 μM
Compound: 4
|
Antitumor activity against human H460 cell line by RTCES assay
Antitumor activity against human H460 cell line by RTCES assay
|
[PMID: 16828553] |
| OVCAR-4 | IC50 |
1.4 μM
Compound: 4
|
Antitumor activity against human OVACR4 cell line by RTCES assay
Antitumor activity against human OVACR4 cell line by RTCES assay
|
[PMID: 16828553] |
Dibenzyl trisulfide (0.1-50 µM; 2 weeks) inhibits CRL-2335 cell proliferation and migration[1].
Dibenzyl trisulfide (10, 50 µM; 48 h) decreased the mRNA and protein expression of BAK-1 and LTA in a dose-dependent manner[1].
Dibenzyl trisulfide (10 µM; 48 h) induces lysosomal membrane permeabilization and cathepsin B release in CRL-2335 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:CRL-2335 cells
-
Concentration:0.1, 0.5, 1, 10, 50 µM
-
Incubation Time:2 weeks
-
Result:Inhibited proliferation and migration of CRL-2335 cell in a dose-dependent manner.
-
Cell Line:CRL-2335 cells
-
Concentration:0, 10, 50 µM
-
Incubation Time:48 h
-
Result:Decreased the mRNA expression of BAK-1, GADD45a, and LTA in a dose-dependent manner.
-
Cell Line:CRL-2335 cells
-
Concentration:0, 10, 50 µM
-
Incubation Time:48 h
-
Result:Decreased the protein expression of BAK-1 and LTA but not GADD45a.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 6493-73-8
-
Appearance Solid
-
Molecular Weight 278.46
-
Formula C14H14S3
-
Color White to off-white
-
SMILES
C1(CSSSCC2=CC=CC=C2)=CC=CC=C1
-
Synonyms
DTS
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : ≥ 100 mg/mL (359.12 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.98 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5912 mL | 17.9559 mL | 35.9118 mL | 89.7795 mL |
| 5 mM | 0.7182 mL | 3.5912 mL | 7.1824 mL | 17.9559 mL | |
| 10 mM | 0.3591 mL | 1.7956 mL | 3.5912 mL | 8.9780 mL | |
| 15 mM | 0.2394 mL | 1.1971 mL | 2.3941 mL | 5.9853 mL | |
| 20 mM | 0.1796 mL | 0.8978 mL | 1.7956 mL | 4.4890 mL | |
| 25 mM | 0.1436 mL | 0.7182 mL | 1.4365 mL | 3.5912 mL | |
| 30 mM | 0.1197 mL | 0.5985 mL | 1.1971 mL | 2.9927 mL | |
| 40 mM | 0.0898 mL | 0.4489 mL | 0.8978 mL | 2.2445 mL | |
| 50 mM | 0.0718 mL | 0.3591 mL | 0.7182 mL | 1.7956 mL | |
| 60 mM | 0.0599 mL | 0.2993 mL | 0.5985 mL | 1.4963 mL | |
| 80 mM | 0.0449 mL | 0.2244 mL | 0.4489 mL | 1.1222 mL | |
| 100 mM | 0.0359 mL | 0.1796 mL | 0.3591 mL | 0.8978 mL |