Gliquidone
Based on 2 publication(s) in Google Scholar
Gliquidone can bind to the pancreatic β-cells and increases insulin release to regulate blood glucose levels. Gliquidone significantly decreases LPS (HY-D1056)-induced proinflammatory responses and inhibits ERK/STAT3/NF-κB phosphorylation in BV2 microglial cells. Gliquidone can suppress microgliosis, microglial hypertrophy mediated by LPS, and proinflammatory cytokine COX-2 and IL-6 levels in murine model. Gliquidone also exhibits good anticancer activity in lung carcinoma cells. Gliquidone has antioxidant property. Gliquidone can be studied in research for type 2 diabetes and cancers.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.93%
- CAS 番号: 33342-05-1
- 分子式: C27H33N3O6S
- 分子量:527.63
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
MedChemExpress(MCE)の使用を引用している文献 Gliquidone
More
生物活性
Gliquidone (Compound GQD) (100-300 μg/mL) exhibits low IC50 value in DPPH (236.84) and superoxide radical scavenging (174.20), suggesting a high antioxidant activity[2].
Gliquidone (0-200 μg, 24 h) has anticancer activity against A549 human alveolar lung cancer cells with an IC50 of 93.49 μg/mL[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:A549
-
Concentration:12.5, 25, 50, 100, 200 μg
-
Incubation Time:24 h
-
Result:Exhibited a significant cytotoxic effect on human alveolar lung cancer cells.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57BL/6J mouse model of Parkinson’s disease[1]
-
Dosage:10, 20 mg/kg
-
Administration:Intraperitoneal injection (i.p.)
-
Result:Effectively downregulated LPS-mediated microgliosis and changes in microglial kinetics and morphology in mouse brain with 20 mg/kg.
Significantly decreased the LPS-induced increases in Iba-1 immunoreactivity, Iba-1-positive cells, and Iba-1-labeled area in the cortex and hippocampal CA1 and CA3 region with 20 mg/kg.
Significantly reduced the LPS-induced increases in Iba-1 intensity, Iba-1-positive cells, and Iba-1-labeled area only in the hippocampal CA3 region with 10 mg/kg.
Significantly reduces the LPS-induced increases in GFAP immunointensity and GFAP-positive cells in the cortex but not in the hippocampus.
Eliminated lipopolysaccharide-induced increases in COX-2 and IL-6 proinflammatory cytokine levels in wild-type mice.
Inhibited LPS-induced NLRP3 infllammasome activation.
化学情報
-
CAS 番号 33342-05-1
-
性状 Solid
-
分子量 527.63
-
分子式 C27H33N3O6S
-
Color White to off-white
-
SMILES
O=S(C1=CC=C(CCN(C(C(C)(C)C2=C3C=C(OC)C=C2)=O)C3=O)C=C1)(NC(NC4CCCCC4)=O)=O
-
別名
AR-DF 26
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Eur J Pharm Sci
Repurposing of FDA-approved drugs by targeting SIRT2 to alleviate inflammatory response and kidney injury. [Abstract]2025 Sep 27:214:107296. PMID: 41022315 -
Cancers (Basel)
2024 Nov 12;16(22):3807. PMID: 39594764
溶剤 & 溶解度
DMSO : 50 mg/mL (94.76 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.74 mM); Suspended solution
This protocol yields a suspended solution of ≥ 2.5 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.74 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8953 mL | 9.4763 mL | 18.9527 mL | 47.3817 mL |
| 5 mM | 0.3791 mL | 1.8953 mL | 3.7905 mL | 9.4763 mL | |
| 10 mM | 0.1895 mL | 0.9476 mL | 1.8953 mL | 4.7382 mL | |
| 15 mM | 0.1264 mL | 0.6318 mL | 1.2635 mL | 3.1588 mL | |
| 20 mM | 0.0948 mL | 0.4738 mL | 0.9476 mL | 2.3691 mL | |
| 25 mM | 0.0758 mL | 0.3791 mL | 0.7581 mL | 1.8953 mL | |
| 30 mM | 0.0632 mL | 0.3159 mL | 0.6318 mL | 1.5794 mL | |
| 40 mM | 0.0474 mL | 0.2369 mL | 0.4738 mL | 1.1845 mL | |
| 50 mM | 0.0379 mL | 0.1895 mL | 0.3791 mL | 0.9476 mL | |
| 60 mM | 0.0316 mL | 0.1579 mL | 0.3159 mL | 0.7897 mL | |
| 80 mM | 0.0237 mL | 0.1185 mL | 0.2369 mL | 0.5923 mL |