CYP3cide
Based on 1 Customer Validation
CYP3cide (PF-4981517) is a potent, selective and time-dependent inhibitor of cytochrome P4503A4 (CYP3A4). The IC50 values for Midazolam 1’-hydroxylase activity are 0.03 μM, 17 μM, and 71 μM for CYP3A4, CYP3A5, and CYP3A7, respectively. CYP3cide can be used to distinguish the contributions of CYP3A4 versus CYP3A5 on agent metabolism.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.92%
- CAS 番号: 1390637-82-7
- 分子式: C26H32N8
- 分子量:456.59
-
保管条件:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
-
HY-B0105
Ketoconazole -
HY-N0563
Alizarin -
HY-70013
Abiraterone -
HY-75054
Abiraterone acetate -
HY-103389
1-Aminobenzotriazole -
HY-13600
Clobetasol propionate -
HY-13215
Avasimibe -
HY-B1184A
(S)-Mephenytoin -
HY-N0563R
Alizarin (Standard) -
HY-N2071
Cedrol -
HY-75054R
Abiraterone acetate (Standard) -
HY-B1135
Benzbromarone
生物活性
製品説明
IC50 & Target
[1]|
CYP3A4 30 nM (EC50) |
CYP3A5 17 μM (EC50) |
CYP3A7 71 μM (EC50) |
体外実験
When investigating the inhibitory properties of CYP3cide, an extreme metabolic inactivation efficiency (kinact/KI) of 3300 to 3800 ml • min-1 • μmol-1 is observed using human liver microsomes from donors of nonfunctioning CYP3A5 (CYP3A5 *3/*3). This observed efficiency equated to an apparent KI between 420 and 480 nM with a maximal inactivation rate (kinact) equal to 1.6 min-1. When CYP3cide is tested at a concentration and preincubation time to completely inhibit CYP3A4 in a library of genotyped polymorphic CYP3A5 microsomes, the correlation of the remaining midazolam 1'-hydroxylase activity to CYP3A5 abundance is significant[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 1390637-82-7
-
性状 Solid
-
分子量 456.59
-
分子式 C26H32N8
-
Color White to light yellow
-
SMILES
CC1=CC=C(C2=C(C3=NN(C)C4=NC=NC(N5C[C@@H](N6CCCCC6)CC5)=C43)C=NN2C)C=C1
-
別名
PF-4981517
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
体外:
DMSO : 50 mg/mL (109.51 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (10.95 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (10.95 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (282 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1901 mL | 10.9507 mL | 21.9015 mL | 54.7537 mL |
| 5 mM | 0.4380 mL | 2.1901 mL | 4.3803 mL | 10.9507 mL | |
| 10 mM | 0.2190 mL | 1.0951 mL | 2.1901 mL | 5.4754 mL | |
| 15 mM | 0.1460 mL | 0.7300 mL | 1.4601 mL | 3.6502 mL | |
| 20 mM | 0.1095 mL | 0.5475 mL | 1.0951 mL | 2.7377 mL | |
| 25 mM | 0.0876 mL | 0.4380 mL | 0.8761 mL | 2.1901 mL | |
| 30 mM | 0.0730 mL | 0.3650 mL | 0.7300 mL | 1.8251 mL | |
| 40 mM | 0.0548 mL | 0.2738 mL | 0.5475 mL | 1.3688 mL | |
| 50 mM | 0.0438 mL | 0.2190 mL | 0.4380 mL | 1.0951 mL | |
| 60 mM | 0.0365 mL | 0.1825 mL | 0.3650 mL | 0.9126 mL | |
| 80 mM | 0.0274 mL | 0.1369 mL | 0.2738 mL | 0.6844 mL | |
| 100 mM | 0.0219 mL | 0.1095 mL | 0.2190 mL | 0.5475 mL |
CYP3cide 関連分類
HY-18642 関連分類
Powered by Bioz