IHCH-7086
Based on 1 Customer Validation
IHCH-7086 is a blood-brain barrier-permeable, partial β-arrestin-biased agonist of 5-HT2AR with a Ki of 12.59 nM. IHCH-7086 blocks D-lysergic acid diethylamide-induced head-twitch response in mice and alleviates depression-like behaviors in mice subjected to acute restraint stress or injected with Corticosterone (HY-B1618). IHCH-7086 is applicable to research related to depression.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.96%
- CAS No.: 2957888-70-7
- 화학식: C24H31N3O
- 분자량:377.52
-
보관:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
제품 설명
IC50 & Target
[1]|
5-HT2A Receptor |
Arrestin-3/β-Arrestin 2 |
In Vitro
IHCH-7086 binds exclusively to the EBP of purified 5-HT2A R and exhibits a significant preference for activating β-arrestin signaling[1].
IHCH-7086 (multiple concentrations) acts as a β-arrestin-biased partial agonist at human 5-HT2AR, with a binding affinity of 12.59 nM, and does not activate Gq-mediated signaling[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
IHCH-7086 (10 mg/kg; i.p.; single acute administration) produces significant antidepressant-like effects in acute restraint stress-induced depression-like mice, as measured by reduced immobility in the TST and FST, with efficacy dependent on 5-HT2A receptor activation[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2957888-70-7
-
Appearance Oil
-
분자량 377.52
-
화학식 C24H31N3O
-
Color Off-white to yellow
-
SMILES
CN1C2=C3C([C@@]4([H])[C@@](CCN(C4)CCCC5=C(C=CC=C5)OC)([H])N3CC1)=CC=C2
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 100 mg/mL (264.89 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.62 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.62 mM); Suspended solution
This protocol yields a suspended solution of ≥ 2.5 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (276 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
References
[1]. Yin YN, et al. Non-hallucinogenic Psychedelic Analog Design: A Promising Direction for Depression Treatment. Neurosci Bull. 2023 Jan;39(1):170-172. [Content Brief]
[2]. Cao D, et al. Structure-based discovery of nonhallucinogenic psychedelic analogs. Science. 2022;375(6579):403-411. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6489 mL | 13.2443 mL | 26.4887 mL | 66.2217 mL |
| 5 mM | 0.5298 mL | 2.6489 mL | 5.2977 mL | 13.2443 mL | |
| 10 mM | 0.2649 mL | 1.3244 mL | 2.6489 mL | 6.6222 mL | |
| 15 mM | 0.1766 mL | 0.8830 mL | 1.7659 mL | 4.4148 mL | |
| 20 mM | 0.1324 mL | 0.6622 mL | 1.3244 mL | 3.3111 mL | |
| 25 mM | 0.1060 mL | 0.5298 mL | 1.0595 mL | 2.6489 mL | |
| 30 mM | 0.0883 mL | 0.4415 mL | 0.8830 mL | 2.2074 mL | |
| 40 mM | 0.0662 mL | 0.3311 mL | 0.6622 mL | 1.6555 mL | |
| 50 mM | 0.0530 mL | 0.2649 mL | 0.5298 mL | 1.3244 mL | |
| 60 mM | 0.0441 mL | 0.2207 mL | 0.4415 mL | 1.1037 mL | |
| 80 mM | 0.0331 mL | 0.1656 mL | 0.3311 mL | 0.8278 mL | |
| 100 mM | 0.0265 mL | 0.1324 mL | 0.2649 mL | 0.6622 mL |
IHCH-7086 Related Classifications
HY-169841 Related Classifications
Powered by Bioz