PROTAC MDM2 Degrader-2
Based on 1 publication(s) in Google Scholar
PROTAC MDM2 Degrader-2 is an MDM2 PROTAC degrader. PROTAC MDM2 Degrader-2 can induce the self-ubiquitination and degradation of MDM2, thereby upregulating the level of p53 protein. PROTAC MDM2 Degrader-2 has anti-tumor activity and can be used in the study of cancer.
(Pink: MDM2 ligand (HY-128836); Blue: MDM2 ligand (HY-128836); Black: linker (HY-128833)).
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 95.01%
- CAS No.: 2249944-99-6
- 화학식: C70H76Cl4N10O12
- 분자량:1391.22
-
보관:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) PROTAC MDM2 Degrader-2
MoreAll PROTACs Isoforms
More
Biological Activity
제품 설명
IC50 & Target
[1]|
MDM2 |
In Vitro
PROTAC MDM2 Degrader-2 (Compound 15b) (0-20 μM; 12 h) upregulates the level of p53 protein and inhibits the level of MDM2 protein in A549 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:A549 cells
-
Concentration:0, 5 and 20 μM
-
Incubation Time:12 h
-
Result:Inhibited the level of MDM2 in a dose-dependent manner.
Increased the level of p53 in a dose-dependent manner.
Chemical Information
-
CAS No. 2249944-99-6
-
Appearance Solid
-
분자량 1391.22
-
화학식 C70H76Cl4N10O12
-
Color Off-white to light yellow
-
SMILES
O=C(N1CC(N(CC(NCCOCCOCCNC(CN2C(CN(C(N3[C@@H](C4=CC=C(Cl)C=C4)[C@@H](C5=CC=C(Cl)C=C5)N=C3C6=C(C=C(OC)C=C6)OC(C)C)=O)CC2)=O)=O)=O)CC1)=O)N7[C@@H](C8=CC=C(Cl)C=C8)[C@@H](C9=CC=C(Cl)C=C9)N=C7C%10=C(C=C(OC)C=C%10)OC(C)C
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (1)
-
Journal Impact Factor
-
Most Recent
용액&용해도
In Vitro:
DMSO : 50 mg/mL (35.94 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (1.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (273 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.7188 mL | 3.5940 mL | 7.1879 mL | 17.9698 mL |
| 5 mM | 0.1438 mL | 0.7188 mL | 1.4376 mL | 3.5940 mL | |
| 10 mM | 0.0719 mL | 0.3594 mL | 0.7188 mL | 1.7970 mL | |
| 15 mM | 0.0479 mL | 0.2396 mL | 0.4792 mL | 1.1980 mL | |
| 20 mM | 0.0359 mL | 0.1797 mL | 0.3594 mL | 0.8985 mL | |
| 25 mM | 0.0288 mL | 0.1438 mL | 0.2875 mL | 0.7188 mL | |
| 30 mM | 0.0240 mL | 0.1198 mL | 0.2396 mL | 0.5990 mL |
PROTAC MDM2 Degrader-2 Related Classifications
HY-128841 Related Classifications
Powered by Bioz