SIRT-IN-2
Based on 1 Customer Validation
SIRT-IN-2 is a potent inhibitor of SIRT1/2/3, with IC50s of 4, 4, 7 nM, respectively.
For research use only. We do not sell to patients.
- Purity: 98.08%
- CAS No.: 1431411-66-3
- Formula: C15H21N5O3S2
- Molecular Weight:383.49
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
SIRT1 4 nM (IC50) |
SIRT2 1 nM (IC50) |
SIRT3 7 nM (IC50) |
SIRT-IN-2 (compound 31) is one of the most potent truncated pan SIRT1/ 2/3 inhibitor, the IC50 values are 4, 4, 7 μM, respectively. SIRT-IN-2 (SIRT1/2/3 pan inhibitor) binds identically in the catalytic active site (RMS=0.29), occupying the nicotinamide C-pocket and acetyl lysine substrate channel[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1431411-66-3
-
Appearance Solid
-
Molecular Weight 383.49
-
Formula C15H21N5O3S2
-
Color Yellow to brown
-
SMILES
NC(C1=CC2=NC=NC(N3CCC(CCNS(C)(=O)=O)CC3)=C2S1)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 62.5 mg/mL (162.98 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6076 mL | 13.0381 mL | 26.0763 mL | 65.1907 mL |
| 5 mM | 0.5215 mL | 2.6076 mL | 5.2153 mL | 13.0381 mL | |
| 10 mM | 0.2608 mL | 1.3038 mL | 2.6076 mL | 6.5191 mL | |
| 15 mM | 0.1738 mL | 0.8692 mL | 1.7384 mL | 4.3460 mL | |
| 20 mM | 0.1304 mL | 0.6519 mL | 1.3038 mL | 3.2595 mL | |
| 25 mM | 0.1043 mL | 0.5215 mL | 1.0431 mL | 2.6076 mL | |
| 30 mM | 0.0869 mL | 0.4346 mL | 0.8692 mL | 2.1730 mL | |
| 40 mM | 0.0652 mL | 0.3260 mL | 0.6519 mL | 1.6298 mL | |
| 50 mM | 0.0522 mL | 0.2608 mL | 0.5215 mL | 1.3038 mL | |
| 60 mM | 0.0435 mL | 0.2173 mL | 0.4346 mL | 1.0865 mL | |
| 80 mM | 0.0326 mL | 0.1630 mL | 0.3260 mL | 0.8149 mL | |
| 100 mM | 0.0261 mL | 0.1304 mL | 0.2608 mL | 0.6519 mL |