Valnemulin hydrochloride
Based on 2 publication(s) in Google Scholar
Valnemulin hydrochloride is an orally effective truncated pleurotin antibiotic that inhibits protein synthesis in bacteria by binding to peptidyl transferase in the 50s ribosome subunit. Valnemulin hydrochloride effectively eliminates Mycobacterium bovis in the lungs in an experimental bovine model of Mycoplasma bovis infection. Valnemulin hydrochloride can reduce the mortality of epidemic rabbit enteropathy and has no adverse effect on the growth performance of rabbits.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.13%
- CAS No.: 133868-46-9
- Formule: C31H53ClN2O5S
- Masse moléculaire:601.28
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Valnemulin hydrochloride
MoreVoir tous les produits spécifiques à Isoform Antibiotic
More
Activité biologique
Valnemulin hydrochloride (20-35 ppm; Feed administration; 21 days) effectively reduces the mortality of epidemic rabbit enteropathy, and has no adverse effect on the growth performance of rabbits [2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Mycoplasma bovis infection treated male calves aged 10-35 days[1]
-
Dosage:10 mg/kg in non-salt form
-
Administration:Oral administration (p.o.); 10 days
-
Result:Resulted in a rapid diminution of clinical signs, restoration of appetite and reversal of weight loss.
Effectively reduced the isolation of Pasteurella multocida from the calves, lungs.
-
Animal Model:Hycole strain rabbits aged 33-37 days with epizootic rabbit enteropathy[2]
-
Dosage:20 or 35 parts per million (ppm)
-
Administration:Feed administration; 21 days
-
Result:Reduced rabbit mortality. Epizootic rabbit enteropathy mortality was 23% in untreated rabbits and 11% and 7.6% in rabbits treated with 20 and 35 ppm doses, respectively.
Had no detrimental effects on appetite, weight gain or feed conversion rate.
Chemical Information
-
CAS No. 133868-46-9
-
Appearance Solid
-
Masse moléculaire 601.28
-
Formule C31H53ClN2O5S
-
Color White to off-white
-
SMILES
C[C@@H]([C@@H]([C@@](C)(C[C@H]1OC(CSC(C)(C)CNC([C@H](N)C(C)C)=O)=O)C=C)O)C(CCC2=O)(CC[C@H]3C)[C@]2([H])C31C.Cl
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cell Rep
Pharmacological boosting of cGAS activation sensitizes chemotherapy by enhancing antitumor immunity. [Abstract]2023 Mar 20;42(3):112275. PMID: 36943864 -
J Biol Chem
2021 Jan-Jun:296:100525. PMID: 33689695
Solvant et solubilité
DMSO : ≥ 100 mg/mL (166.31 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (166.31 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (166.31 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (537 KB)
- English - EN (537 KB)
- Français - FR (537 KB)
- Deutsch - DE (537 KB)
- Norwegian - NO (537 KB)
- Español - ES (537 KB)
- Swedish - SV (537 KB)
- Italian - IT (537 KB)
- Korean - KR (537 KB)
- Portuguese - PT (537 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 1.6631 mL | 8.3156 mL | 16.6312 mL | 41.5780 mL |
| 5 mM | 0.3326 mL | 1.6631 mL | 3.3262 mL | 8.3156 mL | |
| 10 mM | 0.1663 mL | 0.8316 mL | 1.6631 mL | 4.1578 mL | |
| 15 mM | 0.1109 mL | 0.5544 mL | 1.1087 mL | 2.7719 mL | |
| 20 mM | 0.0832 mL | 0.4158 mL | 0.8316 mL | 2.0789 mL | |
| 25 mM | 0.0665 mL | 0.3326 mL | 0.6652 mL | 1.6631 mL | |
| 30 mM | 0.0554 mL | 0.2772 mL | 0.5544 mL | 1.3859 mL | |
| 40 mM | 0.0416 mL | 0.2079 mL | 0.4158 mL | 1.0394 mL | |
| 50 mM | 0.0333 mL | 0.1663 mL | 0.3326 mL | 0.8316 mL | |
| 60 mM | 0.0277 mL | 0.1386 mL | 0.2772 mL | 0.6930 mL | |
| 80 mM | 0.0208 mL | 0.1039 mL | 0.2079 mL | 0.5197 mL | |
| 100 mM | 0.0166 mL | 0.0832 mL | 0.1663 mL | 0.4158 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Valnemulin hydrochloride Related Classifications
HY-B0027 Related Classifications
Powered by Bioz