Ac-PLVE-FMK
Based on 1 Customer Validation
Ac-PLVE-FMK (Ac-Pro-Leu-Val-Glu(OMe)-CH2F), a tetrapeptidyl m-FMKs, is a Cats inhibitor. Ac-PLVE-FMK can be used for the research of cancer.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 2679825-26-2
- Formula: C25H41FN4O7
- Molecular Weight:528.61
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Cathepsin Isoforms
More
Biological Activity
Ac-PLVE-FMK can efficiently inhibit the activity of Cat-B and Cat-L in the target-based assay (human recombinant enzymes) [1].
Ac-PLVE-FMK can penetrate the cell membrane in the cell-based assay on two human renal cancer cell lines (769-P and A498) [1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2679825-26-2
-
Appearance Solid
-
Molecular Weight 528.61
-
Formula C25H41FN4O7
-
Color White to off-white
-
SMILES
COC(CC[C@@H](C(CF)=O)NC([C@H](C(C)C)NC([C@H](CC(C)C)NC([C@H]1N(CCC1)C(C)=O)=O)=O)=O)=O
-
Synonyms
Ac-Pro-Leu-Val-Glu(OMe)-CH2F
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (94.59 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.36 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (2.36 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8918 mL | 9.4588 mL | 18.9175 mL | 47.2938 mL |
| 5 mM | 0.3784 mL | 1.8918 mL | 3.7835 mL | 9.4588 mL | |
| 10 mM | 0.1892 mL | 0.9459 mL | 1.8918 mL | 4.7294 mL | |
| 15 mM | 0.1261 mL | 0.6306 mL | 1.2612 mL | 3.1529 mL | |
| 20 mM | 0.0946 mL | 0.4729 mL | 0.9459 mL | 2.3647 mL | |
| 25 mM | 0.0757 mL | 0.3784 mL | 0.7567 mL | 1.8918 mL | |
| 30 mM | 0.0631 mL | 0.3153 mL | 0.6306 mL | 1.5765 mL | |
| 40 mM | 0.0473 mL | 0.2365 mL | 0.4729 mL | 1.1823 mL | |
| 50 mM | 0.0378 mL | 0.1892 mL | 0.3784 mL | 0.9459 mL | |
| 60 mM | 0.0315 mL | 0.1576 mL | 0.3153 mL | 0.7882 mL | |
| 80 mM | 0.0236 mL | 0.1182 mL | 0.2365 mL | 0.5912 mL |
Powered by Bioz