Bruceine B
Based on 1 Customer Validation
Bruceine B inhibits protein synthesis and nucleic acid synthesis.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.50%
- CAS No.: 25514-29-8
- Formule: C23H28O11
- Masse moléculaire:480.46
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
Immunology/Inflammation Compound Library
HY-L007
-
Natural Product Library
HY-L021
-
Traditional Chinese Medicine Active Compound Library
HY-L065
-
Antiparasitic Compound library
HY-L082
-
Anti-inflammatory Traditional Chinese Medicine Active Compound Library
HY-L114
-
Plant-Sourced Natural Product Library
HY-L115
-
Heterocyclic Compound Library
HY-L138
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Natural Product Library Plus
HY-L021P
-
Natural Product and Natural Product-Like Compound Library
HY-L021M
-
Bioactive Compound Library
HY-L001
-
Miao Ethnicity Medicine Compound Library
HY-L190
-
Heat-Clearing and Detoxification Traditional Chinese Medicine Compound Library
HY-L194
-
High-Throughput Bioactive Compound Library
HY-L205
-
High-Throughput Natural Product Library
HY-L206
-
Diarrhea-Related Traditional Chinese Medicine Active Compound Library
HY-L224
-
Mass Spectrometry Natural Product Library
HY-L262
Voir tous les produits spécifiques à Isoform Parasite
More
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| A549 | IC50 |
1.3 μM
Compound: 8
|
Cytotoxicity against human A549 cells by MTT assay
Cytotoxicity against human A549 cells by MTT assay
|
[PMID: 22506620] |
| BGC-823 | IC50 |
0.81 μM
Compound: 8
|
Cytotoxicity against human BGC823 cells by MTT assay
Cytotoxicity against human BGC823 cells by MTT assay
|
[PMID: 22506620] |
| FM3A | EC50 |
0.008 nM
Compound: 11
|
Cytotoxicity of compound was tested against mouse mammary tumor FM3A cells
Cytotoxicity of compound was tested against mouse mammary tumor FM3A cells
|
[PMID: 12570385] |
| FM3A | EC50 |
8.0 x 10-6M
Compound: 3a
|
Cytotoxicity against FM3A cells derived from a mammary tumor in mice was evaluated.
Cytotoxicity against FM3A cells derived from a mammary tumor in mice was evaluated.
|
[PMID: 9871598] |
| HCT-116 | IC50 |
0.099 μM
Compound: 9c
|
Antiproliferative activity against human HCT-116 cells incubated for 72 hrs by WST-1 assay
Antiproliferative activity against human HCT-116 cells incubated for 72 hrs by WST-1 assay
|
[PMID: 33289552] |
| HCT-8 | IC50 |
2 μM
Compound: 8
|
Cytotoxicity against human HCT8 cells by MTT assay
Cytotoxicity against human HCT8 cells by MTT assay
|
[PMID: 22506620] |
| HepG2 | IC50 |
0.81 μM
Compound: 8
|
Cytotoxicity against human HepG2 cells by MTT assay
Cytotoxicity against human HepG2 cells by MTT assay
|
[PMID: 22506620] |
| SK-OV-3 | IC50 |
0.12 μM
Compound: 8
|
Cytotoxicity against human SKOV3 cells by MTT assay
Cytotoxicity against human SKOV3 cells by MTT assay
|
[PMID: 22506620] |
Bruceine B exhibits an IC50 of 10 nM for antimalarial activity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 25514-29-8
-
Appearance Solid
-
Masse moléculaire 480.46
-
Formule C23H28O11
-
Color White to off-white
-
SMILES
COC([C@]12[C@@]3([H])[C@@]4(CO2)[C@@]([C@H]([C@@H]1O)O)([H])[C@@]5([C@@](C(C)=C(C(C5)=O)O)([H])C[C@@]4([H])OC([C@@H]3OC(C)=O)=O)C)=O
-
Synonyms
Brucein B
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvant et solubilité
DMSO : 100 mg/mL (208.13 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.20 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.20 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0813 mL | 10.4067 mL | 20.8134 mL | 52.0335 mL |
| 5 mM | 0.4163 mL | 2.0813 mL | 4.1627 mL | 10.4067 mL | |
| 10 mM | 0.2081 mL | 1.0407 mL | 2.0813 mL | 5.2033 mL | |
| 15 mM | 0.1388 mL | 0.6938 mL | 1.3876 mL | 3.4689 mL | |
| 20 mM | 0.1041 mL | 0.5203 mL | 1.0407 mL | 2.6017 mL | |
| 25 mM | 0.0833 mL | 0.4163 mL | 0.8325 mL | 2.0813 mL | |
| 30 mM | 0.0694 mL | 0.3469 mL | 0.6938 mL | 1.7344 mL | |
| 40 mM | 0.0520 mL | 0.2602 mL | 0.5203 mL | 1.3008 mL | |
| 50 mM | 0.0416 mL | 0.2081 mL | 0.4163 mL | 1.0407 mL | |
| 60 mM | 0.0347 mL | 0.1734 mL | 0.3469 mL | 0.8672 mL | |
| 80 mM | 0.0260 mL | 0.1301 mL | 0.2602 mL | 0.6504 mL | |
| 100 mM | 0.0208 mL | 0.1041 mL | 0.2081 mL | 0.5203 mL |
Bruceine B Related Classifications
HY-N3013 Related Classifications
Powered by Bioz