IWP-12
Based on 1 Customer Validation
IWP-12 is a potent inhibitor of porcupine (PORCN) and inhibits cell-autonomous Wnt signaling with an IC50 of 15 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.53%
- CAS No.: 688353-45-9
- Formule: C18H18N4O2S3
- Masse moléculaire:418.56
-
Stockage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-13912
IWP-2Wnt Production Inhibitor -
HY-15825
IWP L6Porcn Inhibitor -
HY-107570R
IWP-12 (Standard)Reference Standard -
HY-107572
PD 128042ACAT/LPAT Inhibitor -
HY-16706A
Remodelin hydrobromideNAT10 Inhibitor -
HY-13823
C646p300/CBP HAT Inhibitor -
HY-17545
LGK974PORCN Inhibitor -
HY-50202A
Etomoxir sodium saltCPT1a Inhibitor -
HY-B0034
Donepezil HydrochlorideAChE Inhibitor -
HY-107396
YM-750ACAT Inhibitor -
HY-119738
OSMI-1O-GlcNAc Transferase Inhibitor -
HY-N6719
Fumonisin B1Sphingosine N-acyltransferase Inhibitor
Activité biologique
Description
Chemical Information
-
CAS No. 688353-45-9
-
Appearance Solid
-
Masse moléculaire 418.56
-
Formule C18H18N4O2S3
-
Color White to off-white
-
SMILES
O=C1C2=C(N=C(N1C)SCC(NC3=NC4=C(S3)C=C(C)C=C4)=O)CC(C)S2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : 25 mg/mL (59.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (5.97 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (267 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3891 mL | 11.9457 mL | 23.8914 mL | 59.7286 mL |
| 5 mM | 0.4778 mL | 2.3891 mL | 4.7783 mL | 11.9457 mL | |
| 10 mM | 0.2389 mL | 1.1946 mL | 2.3891 mL | 5.9729 mL | |
| 15 mM | 0.1593 mL | 0.7964 mL | 1.5928 mL | 3.9819 mL | |
| 20 mM | 0.1195 mL | 0.5973 mL | 1.1946 mL | 2.9864 mL | |
| 25 mM | 0.0956 mL | 0.4778 mL | 0.9557 mL | 2.3891 mL | |
| 30 mM | 0.0796 mL | 0.3982 mL | 0.7964 mL | 1.9910 mL | |
| 40 mM | 0.0597 mL | 0.2986 mL | 0.5973 mL | 1.4932 mL | |
| 50 mM | 0.0478 mL | 0.2389 mL | 0.4778 mL | 1.1946 mL |
IWP-12 Related Classifications
HY-107570 Related Classifications
Powered by Bioz