Lenalidomide-OH
Based on 1 Customer Validation
Lenalidomide-OH is an analog of cereblon (CRBN) ligand Lenalidomide for E3 ubiquitin ligase, and is used in the recruitment of CRBN protein. Lenalidomide-OH can be connected to the ligand for protein by a linker to form PROTACs, such as the PROTAC BTK degrader SJF620 (HY-133137).
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.48%
- CAS. Nr.: 1416990-08-3
- Formel: C13H12N2O4
- Molecular Weight:260.25
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Anti-Cancer Compound Library
HY-L025
-
Ubiquitination Compound Library
HY-L050
-
E3 Ligase Ligand Library
HY-L128
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
-
3D Diverse Fragment Library
HY-L903
-
MCE Kinase Hinge Binder Fragment Library
HY-L907
-
Molecular Glue-like Compound Library
HY-L918
Biologische Aktivität
|
Cereblon |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| NAMALVA | IC50 |
>1 μM
Compound: 12
|
Antiproliferative activity against human NAMALWA cells assessed as inhibition of [3H]thymidine incorporation after 72 hrs by scintillation counting
Antiproliferative activity against human NAMALWA cells assessed as inhibition of [3H]thymidine incorporation after 72 hrs by scintillation counting
|
[PMID: 23168019] |
| PBMC | IC50 |
>1 μM
Compound: 12
|
Inhibition of TNF-alpha production in LPS-stimulated human PBMC preincubated for 1 hr before LPS challenge measured after 28 to 20 hrs by ELISA
Inhibition of TNF-alpha production in LPS-stimulated human PBMC preincubated for 1 hr before LPS challenge measured after 28 to 20 hrs by ELISA
|
[PMID: 23168019] |
| T-cell | EC50 |
>1 μM
Compound: 12
|
Inhibition of IL-2 production in human T cells measured after 2 to 3 days by ELISA
Inhibition of IL-2 production in human T cells measured after 2 to 3 days by ELISA
|
[PMID: 23168019] |
Chemical Information
-
CAS. Nr. 1416990-08-3
-
Appearance Solid
-
Molecular Weight 260.25
-
Formel C13H12N2O4
-
Color Off-white to gray
-
SMILES
O=C(C(N(CC1=C2C=CC(O)=C1)C2=O)CC3)NC3=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 13.89 mg/mL (53.37 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.99 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8425 mL | 19.2124 mL | 38.4247 mL | 96.0619 mL |
| 5 mM | 0.7685 mL | 3.8425 mL | 7.6849 mL | 19.2124 mL | |
| 10 mM | 0.3842 mL | 1.9212 mL | 3.8425 mL | 9.6062 mL | |
| 15 mM | 0.2562 mL | 1.2808 mL | 2.5616 mL | 6.4041 mL | |
| 20 mM | 0.1921 mL | 0.9606 mL | 1.9212 mL | 4.8031 mL | |
| 25 mM | 0.1537 mL | 0.7685 mL | 1.5370 mL | 3.8425 mL | |
| 30 mM | 0.1281 mL | 0.6404 mL | 1.2808 mL | 3.2021 mL | |
| 40 mM | 0.0961 mL | 0.4803 mL | 0.9606 mL | 2.4015 mL | |
| 50 mM | 0.0768 mL | 0.3842 mL | 0.7685 mL | 1.9212 mL |
Powered by Bioz