MT 63-78
Based on 1 Customer Validation
MT 63-78 is a specific and potent direct AMPK activator with an EC50 of 25 μM. MT 63–78 also induces cell mitotic arrest and apoptosis. MT 63-78 blocks prostate cancer growth by inhibiting the lipogenesis and mTORC1 pathways. MT 63-78 has antitumor effects.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.11%
- CAS. Nr.: 1179347-65-9
- Formel: C21H14N2O2
- Molecular Weight:326.35
-
Speicherung:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle AMPK Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
AMPK 25 μM (EC50) |
mTORC1 |
MT 63-78 (0-50 μM; 4 days; LNCaP and PC3 cells) treatment shows a dose-dependent decrease in cell number, and concomitant to the activation of AMPK signaling[1].
MT 63-78 (25 μM; 24 hours; LNCaP and CRPC cells) treatment induces a significant enrichement in the G2/M population[1].
MT 63-78 (0-50 μM; 24 hours; LNCaP, PC3, C4-4, C4-2B, CL1and 22RV1cells) treatment induces reduction of anti-apoptotic Mcl-1 in concert with accumulation of the pro-apoptotic BH3-only protein Puma[1].
MT 63-78 (0-50 μM; 30 minutes; LNCaP and PC3 cells) treatment shows a dose-dependent phosphorylation of the two major AMPK targets Acetyl-CoA Carboxylase (ACC) on Ser79 and of Raptor on Ser792. And also increases Thr172 phosphorylation on the AMPK α subunit[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:LNCaP and PC3 cells
-
Concentration:0 μM, 1 μM, 5 μM, 10 μM, 25 μM, 50 μM
-
Incubation Time:4 days
-
Result:A dose-dependent decrease in cell number, concomitant to the activation of AMPK signaling was observed.
-
Cell Line:LNCaP and CRPC cells
-
Concentration:25 μM
-
Incubation Time:24 hours
-
Result:Induced a significant enrichement in the G2/M population in both androgen sensitive and CRPC cell models.
-
Cell Line:LNCaP, PC3, C4-4, C4-2B, CL1and 22RV1cells
-
Concentration:0 μM, 10 μM, 25 μM, 50 μM
-
Incubation Time:24 hours
-
Result:Induced reduction of anti-apoptotic Mcl-1 in concert with accumulation of the pro-apoptotic BH3-only protein Puma in all PCa cells.
-
Cell Line:LNCaP and PC3 cells
-
Concentration:0 μM, 0.25 μM, 0.5 μM, 1 μM, 5 μM, 25 μM, 50 μM
-
Incubation Time:30 minutes
-
Result:Observed a dose-dependent phosphorylation of the two major AMPK targets Acetyl-CoA Carboxylase (ACC) on Ser79 and of Raptor on Ser792. A corresponding increase in Thr172 phosphorylation on the AMPK α subunit was also observed.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:C57 BL/6 male mice bearing LNCaP tumors[1]
-
Dosage:30 mg/kg
-
Administration:Intraperitoneal injection; daily; for 14 days
-
Result:Led to a 33% inhibition of tumor growth.
Chemical Information
-
CAS. Nr. 1179347-65-9
-
Appearance Solid
-
Molecular Weight 326.35
-
Formel C21H14N2O2
-
Color Light yellow to brown
-
SMILES
N#CC1=CNC2=C1C=C(C3=CC=C(C4=C(O)C=CC=C4O)C=C3)C=C2
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Lösungsmittel & Löslichkeit
DMSO : 50 mg/mL (153.21 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (6.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (6.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (281 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0642 mL | 15.3210 mL | 30.6419 mL | 76.6049 mL |
| 5 mM | 0.6128 mL | 3.0642 mL | 6.1284 mL | 15.3210 mL | |
| 10 mM | 0.3064 mL | 1.5321 mL | 3.0642 mL | 7.6605 mL | |
| 15 mM | 0.2043 mL | 1.0214 mL | 2.0428 mL | 5.1070 mL | |
| 20 mM | 0.1532 mL | 0.7660 mL | 1.5321 mL | 3.8302 mL | |
| 25 mM | 0.1226 mL | 0.6128 mL | 1.2257 mL | 3.0642 mL | |
| 30 mM | 0.1021 mL | 0.5107 mL | 1.0214 mL | 2.5535 mL | |
| 40 mM | 0.0766 mL | 0.3830 mL | 0.7660 mL | 1.9151 mL | |
| 50 mM | 0.0613 mL | 0.3064 mL | 0.6128 mL | 1.5321 mL | |
| 60 mM | 0.0511 mL | 0.2553 mL | 0.5107 mL | 1.2767 mL | |
| 80 mM | 0.0383 mL | 0.1915 mL | 0.3830 mL | 0.9576 mL | |
| 100 mM | 0.0306 mL | 0.1532 mL | 0.3064 mL | 0.7660 mL |
MT 63-78 Related Classifications
HY-W058849 Related Classifications
Powered by Bioz