TL02-59-d5
TL02-59-d5 is the deuterium labeled TL02-59 (HY-112852). TL02-59 is an orally active, selective Src-family kinase Fgr inhibitor with an ICC50 of 0.03 nM. TL02-59 inhibits Lyn and Hck with ICC50s of 0.1 nM and 160 nM, respectively. TL02-59 potently suppresses acute myelogenous leukemia (AML) cell growth.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Formel: C32H29D5F3N5O4
- Molecular Weight:614.67
-
Speicherung:
Please store the product under the recommended conditions in the Certificate of Analysis.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
-
Help & FAQs
Biologische Aktivität
Stable heavy isotopes of hydrogen, carbon, and other elements have been incorporated into drug molecules, largely as tracers for quantitation during the drug development process. Deuteration has gained attention because of its potential to affect the pharmacokinetic and metabolic profiles of drugs.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
1. This compound can be used as a tracer
2. This compound can be used as an internal standard for quantitative analysis by NMR, GC-MS, or LC-MS.
Chemical Information
-
Unlabeled CAS 1315330-17-6
-
Molecular Weight 614.67
-
Formel C32H29D5F3N5O4
-
SMILES
O=C(NC1=CC=C(CN2CCN(C([2H])([2H])C([2H])([2H])[2H])CC2)C(C(F)(F)F)=C1)C3=CC=C(C)C(OC4=C5C=C(OC)C(OC)=CC5=NC=N4)=C3
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Please store the product under the recommended conditions in the Certificate of Analysis.
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (162.69 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 10 mg/mL (16.27 mM); Clear solution
This protocol yields a clear solution of ≥ 10 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 10 mg/mL (16.27 mM); Suspended solution
This protocol yields a suspended solution of ≥ 10 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6269 mL | 8.1344 mL | 16.2689 mL | 40.6722 mL |
| 5 mM | 0.3254 mL | 1.6269 mL | 3.2538 mL | 8.1344 mL | |
| 10 mM | 0.1627 mL | 0.8134 mL | 1.6269 mL | 4.0672 mL | |
| 15 mM | 0.1085 mL | 0.5423 mL | 1.0846 mL | 2.7115 mL | |
| 20 mM | 0.0813 mL | 0.4067 mL | 0.8134 mL | 2.0336 mL | |
| 25 mM | 0.0651 mL | 0.3254 mL | 0.6508 mL | 1.6269 mL | |
| 30 mM | 0.0542 mL | 0.2711 mL | 0.5423 mL | 1.3557 mL | |
| 40 mM | 0.0407 mL | 0.2034 mL | 0.4067 mL | 1.0168 mL | |
| 50 mM | 0.0325 mL | 0.1627 mL | 0.3254 mL | 0.8134 mL | |
| 60 mM | 0.0271 mL | 0.1356 mL | 0.2711 mL | 0.6779 mL | |
| 80 mM | 0.0203 mL | 0.1017 mL | 0.2034 mL | 0.5084 mL | |
| 100 mM | 0.0163 mL | 0.0813 mL | 0.1627 mL | 0.4067 mL |
TL02-59-d5 Related Classifications
HY-112852S Related Classifications
Powered by Bioz