EB-47 dihydrochloride
Based on 6 publication(s) in Google Scholar
EB-47 dihydrochloride, a potent and selective PARP-1/ARTD-1 inhibitor with an IC50 value of 45 nM, shows modest potency against ARTD5 with an IC50 value of 410 nM. EB-47 mimics the substrate NAD+?and extends from the nicotinamide to the adenosine subsite.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit : 99.58%
- CAS. Nr.: 1190332-25-2
- Formel: C24H29Cl2N9O6
- Molecular Weight:610.45
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-10617A
RucaparibPARP Inhibitor -
HY-10619
NiraparibPARP Inhibitor -
HY-10162
OlaparibPARP Inhibitor -
HY-16106
TalazoparibPARP Inhibitor -
HY-10129
VeliparibPARP Inhibitor -
HY-13688A
PJ34PARP Inhibitor -
HY-12022
3-AminobenzamidePARP Inhibitor -
HY-10162R
Olaparib (Standard)PARP Inhibitor -
HY-13536
AZD-2461PARP Inhibitor -
HY-12015
IniparibPARP1 Inhibitor -
HY-108631R
EB-47 dihydrochloride (Standard)Reference Standard -
HY-12032
AG14361PARP Inhibitor
Publications Citing Use of MedChemExpress (MCE) EB-47 dihydrochloride
More
Biologische Aktivität
Beschreibung
In Vitro
EB-47 dihydrochloride shows inhibition in excess of 50% with CdPARP, and it is able to inhibit CdPARP and HsPARP with IC50 values of 0.86 and 1.0 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
In Vivo
Chemical Information
-
CAS. Nr. 1190332-25-2
-
Appearance Solid
-
Molecular Weight 610.45
-
Formel C24H29Cl2N9O6
-
Color White to off-white
-
SMILES
O=C1NCC2=C(C=CC=C21)NC(CN3CCN(CC3)C([C@H]4O[C@H]([C@@H]([C@@H]4O)O)N5C6=C(N=C5)C(N)=NC=N6)=O)=O.[H]Cl.[H]Cl
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (6)
-
Journal Impact Factor
-
Most Recent
-
Neuron
2026 Apr 16:S0896-6273(26)00218-7. PMID: 41997149 -
Nucleic Acids Res
The CSB chromatin remodeler regulates PARP1- and PARP2-mediated single-strand break repair at actively transcribed DNA regions. [Abstract]2023 Aug 11;51(14):7342-7356. PMID: 37326017 -
J Transl Med
Role of KLF5 in enhancing ovarian cancer stemness and PARPi resistance: mechanisms and therapeutic targeting. [Abstract]2025 Apr 30;23(1):492. PMID: 40307891 -
bioRxiv
2025 May 15:2025.05.14.654090. PMID: 40463025 -
-
Lösungsmittel & Löslichkeit
In Vitro:
DMSO : 62.5 mg/mL (102.38 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 33.33 mg/mL (54.60 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 2.94 mg/mL (4.82 mM); Clear solution; Need ultrasonic and warming and heat to 60°C
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Reinheit & Dokumentation
-
Data Sheet (277 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Haikarainen T, et al. Evaluation and Structural Basis for the Inhibition of Tankyrases by PARP Inhibitors.ACS Med Chem Lett. 2013 Nov 20;5(1):18-22. [Content Brief]
[2]. García-Saura AG, et al. Comparative inhibitory profile and distribution of bacterial PARPs, using Clostridioides difficile CD160 PARP as a model. Sci Rep. 2018 May 23;8(1):8056. [Content Brief]
[3]. Jagtap PG, et al. The discovery and synthesis of novel adenosine substituted 2,3-dihydro-1H-isoindol-1-ones: potent inhibitors of poly(ADP-ribose) polymerase-1 (PARP-1).Bioorg Med Chem Lett. 2004 Jan 5;14(1):81-5. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.6381 mL | 8.1907 mL | 16.3814 mL | 40.9534 mL |
| 5 mM | 0.3276 mL | 1.6381 mL | 3.2763 mL | 8.1907 mL | |
| 10 mM | 0.1638 mL | 0.8191 mL | 1.6381 mL | 4.0953 mL | |
| 15 mM | 0.1092 mL | 0.5460 mL | 1.0921 mL | 2.7302 mL | |
| 20 mM | 0.0819 mL | 0.4095 mL | 0.8191 mL | 2.0477 mL | |
| 25 mM | 0.0655 mL | 0.3276 mL | 0.6553 mL | 1.6381 mL | |
| 30 mM | 0.0546 mL | 0.2730 mL | 0.5460 mL | 1.3651 mL | |
| 40 mM | 0.0410 mL | 0.2048 mL | 0.4095 mL | 1.0238 mL | |
| 50 mM | 0.0328 mL | 0.1638 mL | 0.3276 mL | 0.8191 mL | |
| DMSO | 60 mM | 0.0273 mL | 0.1365 mL | 0.2730 mL | 0.6826 mL |
| 80 mM | 0.0205 mL | 0.1024 mL | 0.2048 mL | 0.5119 mL | |
| 100 mM | 0.0164 mL | 0.0819 mL | 0.1638 mL | 0.4095 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
EB-47 dihydrochloride Related Classifications
HY-108631 Related Classifications
Powered by Bioz