TA-02
Based on 2 publication(s) in Google Scholar
TA-02, an analog of SB 203580 (HY-10256), is a p38 MAPK inhibitor with an IC50 of 20 nM. TA-02 especially inhibits TGFBR-2. TA-02 exhibits similar cardiogenic properties as SB 203580 and SB 202190 (HY-10295).
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.44%
- No. CAS: 1784751-19-4
- Fòrmula: C20H13F2N3
- Peso molecular:333.33
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-10256
Adezmapimodp38 MAPK Inhibitor -
HY-10295
SB 202190p38 MAPK Inhibitor -
HY-10256A
Adezmapimod hydrochloridep38 MAPK Inhibitor -
HY-10320
Doramapimodp38 MAPK Inhibitor -
HY-100114
TA-01CK1/p38 Inhibitor -
HY-10328
Neflamapimodp38α Inhibitor -
HY-11068
SB 239063p38 MAPK Inhibitor -
HY-10578
PD 169316p38 MAP Kinase Inhibitor -
HY-100115R
TA-02 (Standard)p38 MAPK Inhibitor -
HY-16782
PexmetinibTie-2/p38 MAPK Inhibitor -
HY-10456
TAK-715p38 MAPK Inhibitor -
HY-10402
Losmapimodp38α/β MAPK Inhibitor
Publications Citing Use of MedChemExpress (MCE) TA-02
More
Actividad biológica
Descripciòn
In Vitro
TA-02 (5 μM) inhibits the phosphorylation of proteins downstream of p38α MAPK such as
MAPKAPK2 and HSP27 during cardiogenesis. TA-02 at 5 μM concentration induces cardiogenesis, but also increases ATF-2 phosphorylation and MEF2C expression in contrast to what would be expected with a mechanism dependent on p38α MAPK inhibition[1].
TA-02 induces T/Brachyury whereas SB203580 addition increased MESP1 and T/Brachyury transcripts[1].
TA-02 significantly induces high NKX2-5 expression when applied between days 0-8[1].
TA-02 is found to inhibit multiple targets with similar potency to p38α MAPK, such as p38α, p38β, JNK3, JNK2, CIT, CK1ε, DMPK2, JNK1, DDR1 CK1δ, MEK5, and ERBB2[1].
TA-02 and SB203580 reduce the nuclear TCF/LEF-1 driven transcription of luciferase similar to DKK-1[1].
TA-02 (5 nM-5 μM) inhibits p38 and increases the anti-inflammation effects of BDNF on inflammation in vitro[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
-
Cell Line:The nerve cell line AGE1.HN.
-
Concentration:5 nM-5 μM.
-
Incubation Time:44 h (100 ng/ml LPS for 4 h at 37°C).
-
Result:Suppressed p-38 protein expression, reduced IL-1β, IL-6, IL-18 and TNF-α levels and inhibited iNOS and COX-2 levels in an in vitro model of SCI by BDNF overexpression, compared with the BDNF overexpression group.
Chemical Information
-
No. CAS 1784751-19-4
-
Appearance Solid
-
Peso molecular 333.33
-
Fòrmula C20H13F2N3
-
Color White to light yellow
-
SMILES
FC(C=C1)=CC=C1C2=C(C3=CC=NC=C3)NC(C4=CC=CC=C4F)=N2
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Exp Ther Med
The activation of BDNF reduced inflammation in a spinal cord injury model by TrkB/p38 MAPK signaling. [Abstract]2019 Mar;17(3):1688-1696. PMID: 30783437 -
Environ Toxicol
miR-186-5p targets TGFβR2 to inhibit RAW264.7 cell migration and proliferation during mouse skin wound healing. [Abstract]2023 Dec;38(12):2826-2835. PMID: 37565786
Solvente y solubilidad
In Vitro:
DMSO : 25 mg/mL (75.00 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.50 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (282 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Laco F, et al. Cardiomyocyte differentiation of pluripotent stem cells with SB203580 analogues correlates with Wnt pathway CK1 inhibition independent of p38 MAPK signaling. J Mol Cell Cardiol. 2015 Mar;80:56-70. [Content Brief]
[2]. Jiedong Liang, et al. The activation of BDNF reduced inflammation in a spinal cord injury model by TrkB/p38 MAPK signaling. Exp Ther Med. 2019 Mar;17(3):1688-1696. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0000 mL | 15.0002 mL | 30.0003 mL | 75.0008 mL |
| 5 mM | 0.6000 mL | 3.0000 mL | 6.0001 mL | 15.0002 mL | |
| 10 mM | 0.3000 mL | 1.5000 mL | 3.0000 mL | 7.5001 mL | |
| 15 mM | 0.2000 mL | 1.0000 mL | 2.0000 mL | 5.0001 mL | |
| 20 mM | 0.1500 mL | 0.7500 mL | 1.5000 mL | 3.7500 mL | |
| 25 mM | 0.1200 mL | 0.6000 mL | 1.2000 mL | 3.0000 mL | |
| 30 mM | 0.1000 mL | 0.5000 mL | 1.0000 mL | 2.5000 mL | |
| 40 mM | 0.0750 mL | 0.3750 mL | 0.7500 mL | 1.8750 mL | |
| 50 mM | 0.0600 mL | 0.3000 mL | 0.6000 mL | 1.5000 mL | |
| 60 mM | 0.0500 mL | 0.2500 mL | 0.5000 mL | 1.2500 mL |
TA-02 Related Classifications
HY-100115 Related Classifications
Powered by Bioz