GL0388
Based on 1 Customer Validation
GL0388 is a Bax activator that results in Bax insertion into mitochondrial membrane. GL0388 shows antiproliferative activities against various cancer cells, with IC50s of 0.299-1.57 μM. GL0388 activates Bax and induce Bax-mediated apoptosis. GL0388 suppresses breast cancer xenograft tumor growth in vivo.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.22%
- No. CAS: 2886772-68-3
- Fòrmula: C21H17FN2O
- Peso molecular:332.37
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Breast Cancer Compound Library
HY-L074
-
Mitochondria-Targeted Compound Library
HY-L089
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Activators Library
HY-L159
-
Mitophagy Compound Library
HY-L180
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
Actividad biológica
|
Bax |
GL0388 (0.1-10 μM; 72 h) inhibits the cell proliferation of MDA-MB-231 and MCF-7 breast cancer cell lines, with IC50s of 0.96 μM and 0.52 μM, respectively[1].
GL0388 (0.01-100 μM) inhibits the cell proliferation in 60 human tumor cell lines, with GI550s of 0.299-1.57 μM[1].
GL0388 (1-10 μM; 48 h) significantly upregulates the cleaved PARP-1 and cleaved caspase 3 in MDA-MB-231 cells[1].
GL0388 (0.1-1 μM; 24 h) inhibits the colony formation and invasion of breast cancer cells[1].
GL0388 (1-10 μM; 24 h) promotes Bax insertion into mitochondrial membranes of MDA-MB-231 cells in a dose-dependent manner. GL0388 increases cytochrome c in the cytosolic fraction of MDA-MB-231 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MCF-7, MDA-MB-231 cells
-
Concentration:0.1, 0.33, 1, 3.3, 10 μM
-
Incubation Time:72 hours
-
Result:Inhibited the growth of MCF-7, MDA-MB-231 cells, with IC50s of 0.52 μM and 0.96 μM, respectively.
-
Cell Line:MDA-MB-231 cells
-
Concentration:1, 5, 10 μM
-
Incubation Time:48 hours
-
Result:Significantly led to the upregulation of cleaved PARP-1 and cleaved caspase 3.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female nude mice were injected MDA-MB-231 cells[1]
-
Dosage:10-20 mg/kg for i.p.; 15 mg/kg for i.t.
-
Administration:I.p and i.t. once daily for 10 days
-
Result:Significantly inhibited tumor growth at a dose of 15 mg/kg every other day.
I.T. administration for 10 consecutive days, with an inhibition rate of 55%, comparable to the I.P. efficacy at the dose of daily 20 mg/kg.
Chemical Information
-
No. CAS 2886772-68-3
-
Appearance Solid
-
Peso molecular 332.37
-
Fòrmula C21H17FN2O
-
Color Light yellow to yellow
-
SMILES
NCCOC1=NC=CC=C1/C=C2C3=C(C4=C\2C=C(C=C4)F)C=CC=C3
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (300.87 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.52 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (283 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0087 mL | 15.0435 mL | 30.0870 mL | 75.2174 mL |
| 5 mM | 0.6017 mL | 3.0087 mL | 6.0174 mL | 15.0435 mL | |
| 10 mM | 0.3009 mL | 1.5043 mL | 3.0087 mL | 7.5217 mL | |
| 15 mM | 0.2006 mL | 1.0029 mL | 2.0058 mL | 5.0145 mL | |
| 20 mM | 0.1504 mL | 0.7522 mL | 1.5043 mL | 3.7609 mL | |
| 25 mM | 0.1203 mL | 0.6017 mL | 1.2035 mL | 3.0087 mL | |
| 30 mM | 0.1003 mL | 0.5014 mL | 1.0029 mL | 2.5072 mL | |
| 40 mM | 0.0752 mL | 0.3761 mL | 0.7522 mL | 1.8804 mL | |
| 50 mM | 0.0602 mL | 0.3009 mL | 0.6017 mL | 1.5043 mL | |
| 60 mM | 0.0501 mL | 0.2507 mL | 0.5014 mL | 1.2536 mL | |
| 80 mM | 0.0376 mL | 0.1880 mL | 0.3761 mL | 0.9402 mL | |
| 100 mM | 0.0301 mL | 0.1504 mL | 0.3009 mL | 0.7522 mL |
GL0388 Related Classifications
HY-132173 Related Classifications
Powered by Bioz