IU1-47
Based on 3 publication(s) in Google Scholar
IU1-47 is a potent and specific USP14 inhibitor with an IC50 of 0.6 μM. IU1-47 inhibits IsoT/USP5 with an IC50 of 20 μM. IU1-47 induces tau elimination in cultured neurons.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.68%
- No. CAS: 670270-31-2
- Fòrmula: C19H23ClN2O
- Peso molecular:330.85
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) IU1-47
More-
IP
Actividad biológica
IC50: 0.6 μM (USP14), 20 μM (IsoT/USP5)[1]
IU1-47 is essentially inactive on free USP14 (USP14 that is not bound to the proteasome). IU1-47 (25 μM) antagonizes USP14 deubiquitinating activity and stimulates substrate degradation in vitro[1].
IU1-47 stimulates tau degradation principally via the ubiquitin-proteasome system. IU1-47 (3 μM, 10 and 30 μM; 48 hours) significantly decreases Tau and phosphotau species Ser-202/Thr-205 levels in murine cortical primary neurons. The level of USP14 itself does not change[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Murine cortical primary neurons (DIV5) isolated from APPSwe/P301L transgenic animals
-
Concentration:3 μM, 10 and 30 μM
-
Incubation Time:48 hours
-
Result:Significantly decreased Tau and phosphotau species Ser-202/Thr-205 levels.
No change in USP14 protein level.
Chemical Information
-
No. CAS 670270-31-2
-
Appearance Solid
-
Peso molecular 330.85
-
Fòrmula C19H23ClN2O
-
Color White to off-white
-
SMILES
CC1=CC(C(CN2CCCCC2)=O)=C(N1C3=CC=C(C=C3)Cl)C
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Adv Healthc Mater
Ultrasmall Nanoparticles Mitigate Tau Hyperphosphorylation to Restore Synaptic Integrity and Boost Cognitive Function in Alzheimer's Disease. [Abstract]2025 May 16:e2500941. PMID: 40376857 -
J Biol Chem
The ubiquitin ligase UBR4 and the deubiquitylase USP5 modulate the stability of DNA mismatch repair protein MLH1. [Abstract]2024 Jul 18:107592. PMID: 39032648
IU1-47 purchased from MedChemExpress. Usage Cited in: J Biol Chem. 2024 Jul 18:107592. [Abstract]
Endogenous MLH1 ubiquitylation is increased by USP5 inhibition. HeLa and SW620 cells were treated with IU1-47, a selective inhibitor of USP5, for 24 h, followed by cell lysate preparation for MLH1 ubiquitylation.
-
Anim Cells Syst
Blocking SLC7A11 attenuates the proliferation of esophageal squamous cell carcinoma cells. [Abstract]2024 May 11;28(1):237-250. PMID: 38741950
Solvente y solubilidad
DMSO : 16.67 mg/mL (50.39 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.67 mg/mL (5.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (16.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.67 mg/mL (5.05 mM); Clear solution
This protocol yields a clear solution of ≥ 1.67 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (16.7 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0225 mL | 15.1126 mL | 30.2252 mL | 75.5629 mL |
| 5 mM | 0.6045 mL | 3.0225 mL | 6.0450 mL | 15.1126 mL | |
| 10 mM | 0.3023 mL | 1.5113 mL | 3.0225 mL | 7.5563 mL | |
| 15 mM | 0.2015 mL | 1.0075 mL | 2.0150 mL | 5.0375 mL | |
| 20 mM | 0.1511 mL | 0.7556 mL | 1.5113 mL | 3.7781 mL | |
| 25 mM | 0.1209 mL | 0.6045 mL | 1.2090 mL | 3.0225 mL | |
| 30 mM | 0.1008 mL | 0.5038 mL | 1.0075 mL | 2.5188 mL | |
| 40 mM | 0.0756 mL | 0.3778 mL | 0.7556 mL | 1.8891 mL | |
| 50 mM | 0.0605 mL | 0.3023 mL | 0.6045 mL | 1.5113 mL |