HTH-02-006
Based on 1 Customer Validation
HTH-02-006 is a NUAK2 inhibitor, with an IC50 value of 126 nM. HTH-02-006 inhibits NUAK2-mediated signaling by reducing phosphorylation of its substrate MYPT1 at S445 and downstream MLC. HTH-02-006 shows growth inhibitory efficacy in YAP-high cancer cells (HuCCT-1, SNU475). HTH-02-006 significantly suppresses YAP-induced hepatomegaly (reduced liver/body weight ratio) in TetO-YAP S127A transgenic mice and demonstrates significant anti-tumor efficacy in mice bearing HMVP2 prostate cancer allografts. HTH-02-006 can be used for the study of liver cancer and prostate cancer.
For research use only. We do not sell to patients.
- Purity: 99.42%
- Formula: C25H29IN6O3
- Molecular Weight:588.44
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
NUAK2 126 nM (IC50) |
HTH-02-006 inhibits NUAK2 kinase activity with an IC50 of 126 nM in vitro, as measured by reduced [γ-32P]ATP incorporation into Sakamototide in a dose-dependent manner[1].
HTH-02-006 (0.5-16 μM, 120 h) reduces phosphorylated MYPT1 (S445) and phosphorylated MLC levels in SNU475 cells, inhibiting actomyosin cytoskeleton activation[1].
HTH-02-006 (0.5-16 μM, 120 h) exhibits higher growth inhibition efficacy in YAP-high liver cancer cells (HuCCT-1, SNU475) compared to YAP-low cells (HepG2, SNU398)[1].
HTH-02-006 (0.5-16 μM, 120 h) shows reduced ability to inhibit MYPT1 phosphorylation and cell growth in NUAK2 A236T/A236T knock-in HuCCT-1 cells (drug-resistant mutant) compared to wild-type HuCCT-1 cells[1].
HTH-02-006 (0.5-20 μM, 9 days) exhibits dose-dependent inhibitory effects on the growth of LAPC-4, 22RV1, and HMVP2 prostate cancer cell spheroids, with IC50 values of 4.65 μM, 5.22 μM, and 5.72 μM respectively[2].
HTH-02-006 (1-10 μM) prevents YAP activation in HMVP2 cells, and downregulates the protein expression of YAP target genes NUAK2 and c-MYC[2].
HTH-02-006 (1-20 μM) significantly reduces the invasion area of HMVP2 cell spheroids into Matrigel, slows wound closure, and completely blocks invasion[2].
HTH-02-006 (10 μM, 72-96 h, medium change every 48 h) reduces the proliferation rate of cancer cells by nearly 50% in 1 mm3 explants[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
HTH-02-006 (10 mg/kg, i.p., twice daily, 20 days) significantly inhibits tumor growth in 6-week-old male FVB mice bearing subcutaneous HMVP2 prostate cancer cell spheroid allografts[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:8-week-old Nude mice were subcutaneously injected with 5 × 106 HuCCT-1 TetO-YAP S127A cells (mixed with 100 μl RPMI medium and 100 μl Matrigel) into the flanks[1]
-
Dosage:10 mg/kg
-
Administration:i.p., twice daily, 14 days
-
Result:Suppressed YAP-induced hepatomegaly, as evidenced by reduced liver/body weight ratio.
Decreased the number of proliferating hepatocytes, as shown by reduced Ki67-positive cell count.
Dramatically reduced phosphorylation of MYPT1 at S445 in liver tissues.
Showed no significant changes in body weight.
Showed greater tumor regression with 176.2% TGI when combined with Osimertinib.
-
Animal Model:6-week-old male FVB mice were subcutaneously inoculated with HMVP2 prostate cancer cell spheroids (derived from 2 × 105 HMVP2 cells per mouse)[2]
-
Dosage:10 mg/kg
-
Administration:i.p., twice daily, 20 days
-
Result:Inhibited prostate cancer allograft growth.
Reduced tumor cell proliferation, as shown by a significant decrease in the Ki67-positive proliferation index in tumor tissues.
Downregulated NUAK2 protein expression in tumors.
Chemical Information
-
Appearance Solid
-
Molecular Weight 588.44
-
Formula C25H29IN6O3
-
Color Off-white to light yellow
-
SMILES
CCC(NC1=CC=CC(OC2=NC(NC3=CC=C(C=C3OC)N4CCN(CC4)C)=NC=C2I)=C1)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (169.94 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (4.25 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6994 mL | 8.4970 mL | 16.9941 mL | 42.4852 mL |
| 5 mM | 0.3399 mL | 1.6994 mL | 3.3988 mL | 8.4970 mL | |
| 10 mM | 0.1699 mL | 0.8497 mL | 1.6994 mL | 4.2485 mL | |
| 15 mM | 0.1133 mL | 0.5665 mL | 1.1329 mL | 2.8323 mL | |
| 20 mM | 0.0850 mL | 0.4249 mL | 0.8497 mL | 2.1243 mL | |
| 25 mM | 0.0680 mL | 0.3399 mL | 0.6798 mL | 1.6994 mL | |
| 30 mM | 0.0566 mL | 0.2832 mL | 0.5665 mL | 1.4162 mL | |
| 40 mM | 0.0425 mL | 0.2124 mL | 0.4249 mL | 1.0621 mL | |
| 50 mM | 0.0340 mL | 0.1699 mL | 0.3399 mL | 0.8497 mL | |
| 60 mM | 0.0283 mL | 0.1416 mL | 0.2832 mL | 0.7081 mL | |
| 80 mM | 0.0212 mL | 0.1062 mL | 0.2124 mL | 0.5311 mL | |
| 100 mM | 0.0170 mL | 0.0850 mL | 0.1699 mL | 0.4249 mL |