Palacaparib
Based on 1 publication(s) in Google Scholar
AZD-9574 is a potent and brain penetrant PARP1 inhibitor and shows >8000-fold selectivity for PARP1 compared to PARP2/3/5a/6. AZD-9574 acts by selectively inhibiting and trapping PARP1 at the sites of SSBs. AZD-9574 is an anti-cancer agent and can be used for HRD+?breast cancer and advanced solid malignancies research.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 98.30%
- CAS 番号: 2756333-39-6
- 分子式: C21H22F2N6O2
- 分子量:428.44
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
MedChemExpress（MCE）の使用を引用している文献 Palacaparib
More
生物活性
|
PPAR |
AZD-9574 inhibits PARP1 enzymatic activity with IC50s range between 0.3-2 nM in all tested cell lines irrespective of the homologous recombination repair (HRR) status[1].In isogenic cell lines pairs confirms higher potency and selectivity towards HRR-deficient (HRD+) models (DLD1 BRCA2-/-; SKOV-3 BRCA2-/- and SKOV-3 PALB2-/-). The IC50 in BRCA2-/- DLD1 cells is 1.38 nM compared to IC50 >40 μM BRCA2wt cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
化学情報
-
CAS 番号 2756333-39-6
-
性状 Solid
-
分子量 428.44
-
分子式 C21H22F2N6O2
-
Color White to yellow
-
SMILES
O=C(C1=NC(F)=C(N2CCN(CC2)CC3=C(F)C4=C(N=C(C)C(N4)=O)C=C3)C=C1)NC
-
別名
AZD-9574
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Biochemistry
2023 Aug 15;62(16):2382-2390. PMID: 37531469
溶剤 & 溶解度
DMSO : 22.22 mg/mL (51.86 mM; ultrasonic and adjust pH to 4 with HCl; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.22 mg/mL (5.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.22 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.2 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.22 mg/mL (5.18 mM); Clear solution
This protocol yields a clear solution of ≥ 2.22 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (22.2 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3340 mL | 11.6702 mL | 23.3405 mL | 58.3512 mL |
| 5 mM | 0.4668 mL | 2.3340 mL | 4.6681 mL | 11.6702 mL | |
| 10 mM | 0.2334 mL | 1.1670 mL | 2.3340 mL | 5.8351 mL | |
| 15 mM | 0.1556 mL | 0.7780 mL | 1.5560 mL | 3.8901 mL | |
| 20 mM | 0.1167 mL | 0.5835 mL | 1.1670 mL | 2.9176 mL | |
| 25 mM | 0.0934 mL | 0.4668 mL | 0.9336 mL | 2.3340 mL | |
| 30 mM | 0.0778 mL | 0.3890 mL | 0.7780 mL | 1.9450 mL | |
| 40 mM | 0.0584 mL | 0.2918 mL | 0.5835 mL | 1.4588 mL | |
| 50 mM | 0.0467 mL | 0.2334 mL | 0.4668 mL | 1.1670 mL |
Palacaparib 関連分類
HY-145804 関連分類
Powered by Bioz